571
Views
34
CrossRef citations to date
0
Altmetric
Research Papers

Effects of functionalised reduced graphene oxide on frictional and wear properties of epoxy resin

, , , , , , & show all
Pages 97-106 | Received 06 Oct 2013, Accepted 04 Mar 2014, Published online: 04 Apr 2014

References

  • Novoselov KS, Geim AK, Morozov SV, Jiang D, Zhang Y, Dubonos SV, Grigorieva IV and Firsov AA: ‘Electric field effect in atomically thin carbon films’, Science, 2004, 306, 666–669.
  • Geim AK and Novoselov KS: ‘The rise of graphene’, Nat. Mater., 2007, 6, 183–191.
  • Geim AK: ‘Graphene: status and prospects’, Science, 2009, 324, 1530–1534.
  • Loh KP, Bao Q, Ang PK and Yang J: ‘The chemistry of graphene’, J. Mater. Chem., 2010, 20, 2277–2289.
  • Jung JH, Cheon DS, Liu F, Lee KB and Seo TS: ‘A graphene oxide based immune-biosensor for pathogen detection’, Angew. Chem. Int. Ed., 2010, 49, 5708–5711.
  • Lee C, Wei X, Kysar JW and Hone J: ‘Measurement of the elastic properties and intrinsic strength of monolayer graphene’, Science, 2008, 321, 385–388.
  • Balandin AA, Ghosh S, Bao W, Calizo I, Teweldebrhan D, Miao F and Lau CN: ‘Superior thermal conductivity of single-layer graphene’, Nano Lett., 2008, 8, 902–907.
  • DU X, Skachko I, Barker A and Andrei EY: ‘Approaching ballistic transport in suspended graphene’, Nano Lett., 2008, 3, 491–495.
  • Stoller MD, Park S, Zhu Y, An J and Ruoff RS: ‘Graphene-based ultracapacitors’, Nano Lett., 2008, 8, 3498–3502.
  • Zhang HB, Zheng WQ, Yan Q, Yang Y, Wang J, Lu ZH, Ji GY and Yu ZZ: ‘Electrically conductive polyethylene terephthalate/graphene composite prepared by melt compounding’, Polymer, 2010, 51, 1191–1196.
  • Kuila T, Bose S, Mishra AK, Khanra P, Kim NH and Lee JH: ‘Effect of functionalized graphene on the physical properties of linear low density polyethylene nanocomposite’, Polym. Test., 2012, 31, 31–38.
  • Moniruzzaman M and Winey KI: ‘Polymer nanocomposites containing carbon nanotubes’, Macromolecules, 2006, 39, 5194–5205.
  • Park J.-M, Kim D.-S, Lee J.-R and Kim T.-W: ‘Nondestructive damage sensitivity and reinforcing effect of carbon nanotube/epoxy composites using electro-micromechanical technique’, Mater. Sci. Eng. C, 2003, C23, 971–975.
  • Sandler J, Shaffer MSP, Prasse T, Bauhofer W, Schulte K and Windle AH: ‘Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties’, Polymer, 1999, 40, 5967–5971.
  • Russ M, Rahatekar SS, Koziol K, Farmer B and Peng H: ‘Length-dependent electrical and thermal properties of carbon nanotubeloaded epoxy nanocomposites’, Compos. Sci. Technol., 2013, 81, 42–47.
  • Brostow W, Keselman M, Mironi-Harpaz I, Narkis M and Peirce R: ‘Effects of carbon black on tribology of blends of poly(vinylidene fluoride) with irradiated and non-irradiated ultrahigh molecular weight polyethylene’, Polymer, 2005, 46, 5058.
  • Gong X, Liu J, Baskaran S, Voise RD and Young JS: ‘Surfactant-assisted processing of carbon nanotube/polymer composites’, Chem. Mater., 2000, 12, 1049–1052.
  • Nogales A, Broza G, Roslaniec Z, Schulte K, Sics I, Hsiao BS, Sanz A, Garcia Gutierrez MC, Rueda DR, Domingo C and Ezquerra TA: ‘Low percolation threshold in nanocomposites based on oxidized single wall carbon nanotubes and poly(butylene terephthalate)’, Macromolecules, 2004, 37, 7669.
  • Spitalsky Z, Tasis D, Papagelis K and Galiotis C: ‘Carbon nanotube–polymer composites: chemistry, processing, mechanical and electrical properties’, Prog. Polym. Sci., 2010, 35, 357–401.
  • Allaoui A and El Bounia N: ‘How carbon nanotubes affect the cure kinetics and glass transition temperature of their epoxy composites – a review’, Express Polym. Lett., 2009, 3, 588–594.
  • Gojny FH and Schulte K: ‘Functionalisation effect on the thermo-mechanical behavior of multi-wall carbon nanotube/epoxy-composites’, Compos. Sci. Technol., 2004, 64, 2303–2308.
  • Ramanathan T, Abdala AA, Stankovich S, Dikin DA, Herrera-Alonso M, Piner RD, Adamson DH, Schniepp HC, Chen X, Ruoff RS, Nguyen ST, Aksay IA, Prud’homme RK and Brinson LC: ‘Functionalized graphene sheets for polymer nanocomposites’, Nat. Nanotechnol., 2008, 3, 327–331.
  • Zaman I, Phan TT, Kuan H-C, Meng Q, La LTB, Luong L, Youssf O and Ma J: ‘Epoxy/graphene platelets nanocomposites with two level of interface strength’, Polymer, 2011, 52, 1603–1611.
  • Landel RF and Nielsen LE: ‘Mechanical properties of polymers and composites’; 1974, New York, Marcel Dekker.
  • Yasmin A and Danial IM: ‘Mechanical and thermal properties of graphite platelet and epoxy composite’, Polymer, 2004, 45, 8211–8219.
  • Fang M, Zhang Z, Li J, Zhang H, Lu H and Yang Y: ‘Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces’, J. Mater. Chem., 2010, 20, 9635–9643.
  • Qiu SL, Wang CS, Wang YT, Liu CG, Chen XY, Xie1 HF, Huang YA and Cheng RS: ‘Effects of graphene oxides on the cure behaviors of a tetrafunctional epoxy resin’, Express Polym. Lett., 2011, 9, 809–818.
  • Bao C, Guo Y, Song L, Kan Y, Qian X and Hu Y: ‘In situ preparation of functionalized graphene oxide/epoxy nanocomposites with effective reinforcements’, J. Mater. Chem., 2011, 21, 13290–13298.
  • Wang X, Xing W, Zhang P, Song L, Yang H and Hu Y: ‘Covalent functionalization of graphene with organosilane and its use as a reinforcement in epoxy composites’, Compos. Sci. Technol., 2012, 72, 737–743.
  • Kandanur SS, Rafiee MA, Yavari F, Schrameyer M, Yu Z.-Z., Blanchet TA and Koratkar N: ‘Supression of wear in grapheme polymer composites’, Carbon, 2012, 50, 3178–3183.
  • Pan B, Zhang S, Li W, Zhao J, Liu J, Zhang Y and Zhang Y: ‘Tribological and mechanical investigation of MC nylon reinforced by modified grapheme oxide’, Wear, 2012, 294–295, 395–401.
  • Bilyeu B, Brostow W and Menard KP: ‘Epoxy thermosets and their applications. I. Chemical structures and applications’, J. Mater. Educ., 1999, 21, 28–286.
  • Bilyeu B, Brostow W and Menard KP: ‘Epoxy thermosets and their applications. II: thermal analysis’, J. Mater. Educ., 2000, 22, 107–129.
  • Giraldo LF, Brostow W, Devaux E, López BL and Pérez LD: ‘Scratch and wear resistance of polyamide 6 reinforced with multiwall carbon nanotubes’, J. Nanosci. Nanotechnol., 2008, 8, 1–8.
  • Arribas A, Bermudez M.-D, Brostow W, Carrion-Vilches F.-J and Olea-Mejia O: ‘Scratch resistance of a polycarbonate+organoclay nanohybrid’, Express Polym. Lett., 2009, 3, 621–629.
  • Brostow W, Cassidy PE, Hagg HE, Jaklewicz M and Montemartini PE: ‘Fluoropolymer addition to an epoxy: phase inversion and tribological properties’, Polymer, 2001, 42, 7971–7977.
  • Blau PJ: ‘Fifty years of research on wear of metals’, Tribol. Int., 1997, 30, 321–331.
  • Brostow W, Kovaèeviæ V, Vrsaljko D and Whitworth J: ‘Tribology of polymers and polymer-based composites’, J. Mater. Educ., 2010, 32, 273–290.
  • Hummers WS and Offeman RE: ‘Preparation of graphitic oxide’, J. Am. Chem. Soc., 1958, 80, 1339–1339.
  • Stankovich S, Piner RD, Chen X, Wu N, Nguyen ST and Ruoff RS: ‘Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate)’, J. Mater. Chem., 2006, 16, 155–158.
  • Kuilla T, Bhadra S, Yao D, Kim NH, Bose S and Lee JH: ‘Recent advances in graphene based polymer nanocomposites’, Prog. Polym. Sci., 2010, 35, 1350–1375.
  • Geng Y, Wang SJ and Kim JK: ‘Preparation of graphite nanoplatelets and graphene sheets’, J. Colloid Interface Sci., 2009, 336, 592–598.
  • Wei T, Luo G, Fan Z, Zheng C, Yan J, Yao C, Li W and C. Zhang: ‘Preparation of graphene nanosheet/polymer composites using in situ reduction-extractive dispersion’, Carbon, 2009, 47, 2290–2299.
  • Bourlinos AB, Gournis D, Petridis D, Szabo T, Szeri A and Dekany I: ‘Graphite oxide: chemical reduction to graphite and surface modification with primary aliphatic amines and amino acids’, Langmuir, 2003, 19, 6050–6055.
  • Zhu C, Guo S, Fang Y and Dong S: ‘Reducing sugar: new functional molecules for the green synthesis of graphene nanosheets’, ACS Nano, 2010, 4, 2429–2437.
  • Stankovich S, Dikin DA, Piner RD, Kohlhaas KA, Kleinhammes A, Jia Y, Wu Y, Nguyen ST and Ruoff RS: ‘Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide’, Carbon, 2007, 45, 1558–1565.
  • Kudin KN, Ozbas B, Schniepp HC, Prud’homme RK, Aksay IA and Car R: ‘Raman spectra of graphite oxide and functionalized graphene sheets’, Nano Lett., 2008, 8, 36–41.
  • Li W, Tang X.-Z, Zhang H.-B, Jiang Z.-G, Yu Z.-Z, Du X.-S and Mai Y-W: ‘Simultaneous surface functionalization and reduction of graphene oxide with octadecylamine for electrically conductive polystyrene composites’, Carbon, 2011, 49, 4724–4730.
  • Rafiee MA, Rafiee J, Wang Z, Song H, Yu Z.-Z and Koratkar N: ‘Enhanced mechanical properties of nanocomposites at low graphene content’, ACS Nano, 2009, 3, 3884–3890.
  • Rafiee MA, Lu W, Thomas AV, Zandiatashbar A, Rafiee J, Tour JM, and Koratkar NA: ‘Graphene nanoribbon composites’, ACS Nano, 2010, 4, 7415–7420.
  • Kim S, Do I and Drzal LT: ‘Multifunctional xGnP/LLDPE nanocomposites prepared by solution compounding using various screw rotating systems’, Macromol. Mater. Eng., 2009, 294, 196–205.
  • Kuila T, Khanra P, Mishra AK, Kim NH and Lee JH: ‘Functionalized-graphene/ethylene vinyl acetate co-polymer composites for improved mechanical and thermal properties’, Polym. Test., 2012, 31, 282–289.
  • Romisuhani A, Salmah H and Akmal A: ‘Tensile properties of low density polypropylene (LDPE)/palm kernel shell (PKS) bio-composites: the effect of acrylic acid (AA)’, Mater. Sci. Eng., 2010, 11, 1–7.
  • Oksman K and Clemons C: ‘Mechanical properties of polypropylene-wood and morphology of impact modified floor composites’, J. Appl. Polym. Sci., 1998, 67, 1503–1513.
  • Menard KP: ‘Dynamic mechanical analysis: a practical introduction’, 2nd edn, 103; 2008, Boca Raton, FL, CRC Press.
  • Seyler RJ: ‘Assignment of the glass transition’; 1994, Baltimore, MD, American Society for Testing and Materials.
  • Kalogeras IM and Hagg Lobland HE: ‘The nature of the glassy state: structure and transitions’, J. Mater. Educ., 2012, 34, 69–94.
  • Reiger J: ‘The glass transition temperature Tg of polymers—comparison of the values from differential thermal analysis (DTA, DSC) and dynamic mechanical measurements (torsion pendulum)’, Polym. Test., 2001, 20, 199–204.
  • Mark HF, Bikales NM, Overberger CG and Menges G: ‘Encyclopedia of Polymer Science and engineering’, 2nd edn, 7; 1987, New York, John Wiley & Sons.
  • Kim H, Abdala A and Macosko C: ‘Graphene/polymer nanocomposites in graphite, graphene, and their polymer nanocomposites’; 2012, Boca Raton, FL, CRC Press.
  • Bilyeu B, Brostow W and Menard KP: ‘Epoxy thermosets and their applications. III: kinetic equations and models’, J. Mater. Educ., 2001, 23, 189.
  • Brostow W, Chonkaew W, Menard KP and Scharf TW: ‘Modification of an epoxy resin with a fluoroepoxy oligomer for improved mechanical and tribological properties’, Mater. Sci. Eng. A, 2009, A507, 241–251.
  • de la Isla A, Brostow W, Bujard B, Estevez M, Rodriguez R, Vargas S and Castaño VM: ‘Nanohybrid scratch resistant coatings for teeth and bone viscoelasticity manifested in tribology’, Mater. Res. Innov., 2003, 7, 110–114.
  • Estevez M, Vargas S, de la Isla A, Brostow W, Castaño VM and Rodriguez JR: ‘Anovel dental material with high scratch resistance’, Mater. Res. Innov., 2005, 9, 80–81.
  • Bilyeu B, Brostow W, Chudej L, Estevez M, Hagg Lobland HE, Rodriguez JR and Vargas S: ‘Scratch resistance of different silica filled resins for obturation materials’, Mater. Res. Innov., 2007, 11, 181–184.
  • Romanes MC, D’Souza NA, Coutinho D, Balkus KJ Jr and Scharf TW: ‘Surface and subsurface characterization of epoxy-mesoporous silica composites to clarify tribological properties’, Wear, 2008, 265, 88–96.
  • Dong B, Yang Z, Huang Y and Li H.-L: ‘Study on tribological properties of multi-walled carbon nanotubes/epoxy resin nanocomposites’, Tribol. Lett., 2005, 20, 251–254.
  • Brostow W, Goodman SH and Wahrmund J: ‘Epoxies’, in ‘Handbook of thermoset plastics’, (ed. Dodiuk H and Goodman S H), Chap. 8, 3rd edn; 2014, Oxford, Elsevier.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.