Recent advances in building with composites

REFERENCES

• A. Kelly (ed.): ‘Concise encyclopaedia of composite materials’: 1994, Oxford, Pergamon.
   Google Scholar
• D. Hull: ‘An introduction to composite materials’: 1987, Cambridge, Cambridge University Press.
   Google Scholar
• ‘Aerospace composite structures in the USA’, Report for the International Technology Service (Overseas Missions Unit) of the DTI, UK, 1999.
   Google Scholar
• F. Z. Hu, C. Soutis and E. C. Edge: ‘Interlaminar stresses in composite laminates with a circular hole’, Compos. Struct. , 1997, 37, (2), 223–232.
   Web of Science ®Google Scholar
• F. L. Matthews, G. A. O. Davies, D. Hitchings and C. Soutis: ‘Finite element modelling of composite materials and structures’: 2000, Cambridge, Woodhead Publishing Ltd.
   Google Scholar
• N. Andreasson, C. P. Mackinlay and C. Soutis: ‘Experimental and numerical failure analysis of bolted joints in CFRP woven laminates’. RAeS Aeronaut. 1, 1998, 102, (1018), 445-450.
   Google Scholar
• P. Berbinau and C. Soutis: ‘A new approach for solving mixed boundary value problems along holes in orthotropic plates’, Int. J. Solids Struct. , 2001, 38, (1), 143–159.
   Web of Science ®Google Scholar
• R. H. Oskouei, M. Keikhosravy and C. Soutis: ‘Estimating clamping pressure distribution and stiffness in aircraft bolted joints by finite element analysis’, Proceedings of the Institution of Mechanical Engineers, JAER0596, J. Aeros. Eng. G. , 2009, 223, 863–871.
   Google Scholar
• C. Soutis and S. M. Spearing: ‘Compressive response of notched woven fabric face-sheet honeycomb sandwich panels’, J. Polym. Rubbers Compos. , 2002, 31, (9), 392–397.
   Web of Science ®Google Scholar
• C. Soutis and J. Lee: ‘Measuring the notched compressive strength of composite laminates: Specimen size effects’, Compos. Sci. Technot, 2008, 68, (12), 2359–2366.
   Web of Science ®Google Scholar
• C. Soutis: ‘Modelling the open hole compressive strength of composite laminates tested in hot-wet conditions’, Plast. Rubber Compos. , 2009, 38, (2/3/4), 55-60.
   Google Scholar
• C. Soutis and P. T. Curtis: ‘A method for predicting the fracture toughness of CFRP laminates failing by fibre microbuckling’, Composites A, 2000, 31A, (7), 733–740.
   Web of Science ®Google Scholar
• F. Edgren, C. Soutis and L. E. Asp: ‘Damage tolerance analysis of NCF composite sandwich panels’. Compos. Sci. TechnoL, 2008,68, (13), 2635–2645.
   Web of Science ®Google Scholar
• J. Lee and C. Soutis: ‘A study on the compressive strength of thick carbon fibre/epoxy laminates’, Compos. Sci. Technot, 2007, 67, (10), 2015–2026.
   Web of Science ®Google Scholar
• C. Soutis and J. Lee: ‘Scaling effects in notched carbon fibre/epoxy composites loaded in compression’, J. Mater. Sci. , 2008, 43, (20), 6593–6598.
   Web of Science ®Google Scholar
• M. Kashtalyan and C. Soutis: ‘Stiffness and fracture analysis of laminated composites with off-axis ply matrix cracking’, Composites A, 2007, 38A, (4), 1262–1269.
   Web of Science ®Google Scholar
• M. Kashtalyan and C. Soutis: ‘Mechanisms of internal damage and their effect on the behaviour and properties of cross-ply laminates’, Int AppL Mech. , 2002, 38, 641–657.
   Google Scholar
• S. H. Diaz Valdes and C. Soutis: ‘Health monitoring of composites using Lamb waves generated by piezo-electric devices’, Plast. Rubber Compos. , 2000, 29, (9), 496–502.
   Google Scholar
• S. H. Diaz Valdes and C. Soutis: ‘Real-time non-destructive evaluation of fibre composite laminates using low-frequency Lamb waves’, J. Acoust. Soc. Am. , 2002, 111, (5), 2026–2033.
   PubMed Web of Science ®Google Scholar
• K. Diamanti, J. M. Hodgkinson and C. Soutis: ‘Detection of low-velocity impact damage in composite plates using Lamb waves’. Struct. Health Mond. 1, 3, (1), (2004), 33-41.
   Google Scholar
• K. Diamanti, C. Soutis and J. M. Hodgkinson: ‘Lamb waves for the non-destructive inspection of monolithic and sandwich composite beams’, Composites A, 2005, 36A, (2), 189–195.
   Google Scholar
• K. Diamanti, C. Soutis and J. M. Hodgkinson: ‘Piezoelectric transducer arrangement for the inspection of large composite structures’, Composites A, 2007, 38A, (4), 1121–1130.
   Web of Science ®Google Scholar
• C. Soutis, D.-M. Duan and P. Goutas: ‘Compressive behaviour of CFRP laminates repaired with adhesively bonded external patches’, Compos. Struct. , 1999, 45, (4), 289–301.
   Web of Science ®Google Scholar
• F. Z. Hu and C. Soutis: ‘Strength prediction of patch repaired CFRP laminates loaded in Compression’, J. Compos. Sci. Technot , 2000, 60, (7), 1103–1114.
   Web of Science ®Google Scholar
• K. Diamanti, C. Soutis and J. M. Hodgkinson: Non-destructive inspection of sandwich and repaired composite laminated struc-tures', Compos. Sci. TechnoL, 2005, 65, (13), 2059–2067.
   Web of Science ®Google Scholar
• C. Soutis and J.-B. Ihn: ‘Design, analysis and structural health monitoring of bonded composite repair and substructure’, in ‘Encyclopaedia of structural health monitoring’, (ed. C. Boller et al), 1923-1940; 2009, Chichester, J. Wiley & Sons Ltd.
   Google Scholar
• C. Soutis: ‘Carbon fibre reinforced plastics in aircraft structures’, Mater. Sci. Eng. A, 2005, 412A, (1-2), 171–176.
   Web of Science ®Google Scholar
• C. Soutis: ‘Composite material systems and structures’, in ‘McGraw-Hill 2009 yearbook of science and technology’, (ed. R. Kasunic), 58-61; 2009, Columbus, OH, McGraw-Hill.
   Google Scholar