Effect of phase transformation on corrosion behaviour of Zn–22Al alloys

References

• Gervais E., Levert H. and Bess M.: ‘The development of a family of zinc-base foundry alloys’, Trans. Am. Foundrymen’s Soc., 1980, 8, 183–194.
   Google Scholar
• Kubel E. J. : ‘Expanding horizon for ZA alloys’, Adv. Mater. Process., 1987, 132, (1), 51–57.
   Web of Science ®Google Scholar
• Lo S. H. J. , Dionne S., Sahoo M. and Hawthorne H. M. : ‘Mechanical and tribological properties of zinc–aluminium metal-matrix composites’, J. Mater. Sci., 1992, 27, (21), 5681–5691.
   Web of Science ®Google Scholar
• Roberts C. W. : ‘Intercrystalline corrosion in cast zinc–aluminium alloys’, J. Inst. Met., 1953, 81, (6), 301.
   Google Scholar
• Devillers L. P. and Niessen P.: ‘The mechanism of intergranular corrosion of dilute zinc-aluminium alloys in hot water’, Corros. Sci., 1976, 16, (4), 243–250.
   Web of Science ®Google Scholar
• Mouanga M., Berçot P. and Rauch J. Y. : ‘Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions. Part I: Corrosion layer characterization’, Corros. Sci., 2010, 52, (12), 3984–3992.
   Web of Science ®Google Scholar
• Vu A. Q. , Vuillemin B., Oltra R. and Allély C.: ‘Cut-edge corrosion of a Zn–55Al-coated steel: a comparison between sulphate and chloride solutions’, Corros. Sci., 2011, 53, (9), 3016–3025.
   Web of Science ®Google Scholar
• Yang L., Zhang Y., Zeng X. and Song Z.: ‘Corrosion behaviour of superplastic Zn–Al alloys in simulated acid rain’, Corros. Sci., 2012, 59, 229–237.
   Web of Science ®Google Scholar
• Kwok C. T. , Cheng F. T. and Man H. C. : ‘Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3·5% NaCl solution’, Mater. Sci. Eng. A, 2000, A290, (1–2), 145–154.
   Web of Science ®Google Scholar
• Choudhury P. and Das S.: ‘Effect of microstructure on the corrosion behavior of a zinc–aluminium alloy’, J. Mater. Sci., 2005, 40, (3), 805–807.
   Web of Science ®Google Scholar
• Rosalbino F., Angelini E., Macciò D., Saccone A. and Delfino S.: ‘Application of EIS to assess the effect of rare earths small addition on the corrosion behaviour of Zn–5% Al (Galfan) alloy in neutral aerated sodium chloride solution’, Electrochim. Acta, 2009, 54, (4), 1204–1209.
   Web of Science ®Google Scholar
• Wang F., Xiong B., Zhang Y., Liu H., Li Z., Li X. and Qu C.: ‘Effect of Cu addition on microstructure and corrosion behavior of spray-deposited Zn–30Al alloy’, Mater. Sci. Eng. A, 2012, A532, 100–105.
   Web of Science ®Google Scholar
• Flores M., Blanco O., Muhl S., Piña C. and Heiras J.: ‘Corrosion of a Zn–Al–Cu alloy coated with TiN/Ti films’, Surf. Coat. Technol., 1998, 108–109, 449–453.
   Web of Science ®Google Scholar
• Guerrero R., Farias M. H. and Cota-Araiza L.: ‘Increase in corrosion resistance of Zn–22Al–2Cu alloy by depositing an Y2O3 film studied by Auger electron spectroscopy’, Appl. Surf. Sci., 2002, 185, (3–4), 248–254.
   Web of Science ®Google Scholar
• Chen W., Liu Q., Liu Q., Zhu L. and Wang L.: ‘A combinatorial study of the corrosion and mechanical properties of Zn–Al material library fabricated by ion beam sputtering’, J. Alloys Compd, 2008, 459, (1–2), 261–266.
   Web of Science ®Google Scholar
• Liu K., Ma P., Pu N., Chen J. and Han Q.: ‘Influence of silicon coating on the corrosion resistance of Zn–Al–Mg–RE–Si alloy’, J. Rare Earths, 2010, 28, (Suppl. 1), 378–381.
   Web of Science ®Google Scholar
• Palma E., Puente J. M. and Morcillo M.: ‘The atmospheric corrosion mechanism of 55%Al–Zn coating on steel’, Corros. Sci., 1998, 40, (1), 61–68.
   Web of Science ®Google Scholar
• Lindstrom R., Svensson J. E. and Johansson L. G. : ‘The influence of salt deposits on the atmospheric corrosion of zinc – the important role of the sodium ion’, J. Electrochem. Soc., 2002, 149, (2), B57–B64.
   Web of Science ®Google Scholar
• Magaino S. I. , Soga M., Sobue K., Kawaguchi A., Ishida N. and Imai H.: ‘Zinc corrosion in simulated acid rain’, Electrochim. Acta, 1999, 44, (24), 4307–4312.
   Web of Science ®Google Scholar
• Li Y.: ‘Formation of nano-crystalline corrosion products on Zn–Al alloy coating exposed to seawater’, Corros. Sci., 2001, 43, (9), 1793–1800.
   Web of Science ®Google Scholar
• Shimada M., Kokawa H., Wang Z. J. , Sato Y. S. and Karibe I.: ‘Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering’, Acta Mater., 2002, 50, (9), 2331–2341.
   Web of Science ®Google Scholar
• Kordatos J. D. , Fourlaris G. and Papadimitriou G.: ‘The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds’, Scr. Mater., 2001, 44, (3), 401–408.
   Web of Science ®Google Scholar
• Park J.-Y. and Park Y.-S. : ‘The effects of heat-treatment parameters on corrosion resistance and phase transformations of 14Cr–3Mo martensitic stainless steel’, Mater. Sci. Eng. A, 2007, A449–A451, 1131–1134.
   Google Scholar
• Izumi S., Yamasaki M. and Kawamura Y.: ‘Relation between corrosion behavior and microstructure of Mg–Zn–Y alloys prepared by rapid solidification at various cooling rates’, Corros. Sci., 2009, 51, (2), 395–402.
   Web of Science ®Google Scholar
• Lee H. T. and Wu J. L. : ‘The effects of peak temperature and cooling rate on the susceptibility to intergranular corrosion of alloy 690 by laser beam and gas tungsten arc welding’, Corros. Sci., 2009, 51, (3), 439–445.
   Web of Science ®Google Scholar
• Khalfallah I. Y. , Rahoma M. N. , Abboud J. H. and Benyounis K. Y. : ‘Microstructure and corrosion behavior of austenitic stainless steel treated with laser’, Opt. Laser Technol., 2011, 43, (4), 806–813.
   Web of Science ®Google Scholar
• Yamasaki M., Izumi S., Kawamura Y. and Habazaki H.: ‘Corrosion and passivation behavior of Mg–Zn–Y–Al alloys prepared by cooling rate-controlled solidification’, Appl. Surf. Sci., 2011, 257, (19), 8258–8267.
   Web of Science ®Google Scholar
• Raza M. R. , Ahmad F., Omar M. A. and German R. M. : ‘Effects of cooling rate on mechanical properties and corrosion resistance of vacuum sintered powder injection molded 316L stainless steel’, J. Mater. Process. Technol., 2012, 212, (1), 164–170.
   Web of Science ®Google Scholar
• Park E. and Spiegel M.: ‘Effects of heat treatments on near surface elemental profiles of Fe–15Cr polycrystalline alloy’, Corros. Eng. Sci. Technol., 2005, 40, (3), 217–225.
   Web of Science ®Google Scholar
• Aleem B. J. A. and Ahmad Z.: ‘Corrosion behaviour of aluminium Al 6013-20 SiC(P) at controlled velocities and elevated temperatures’, Corros. Eng. Sci. Technol., 2009, 44, (4), 312–320.
   Web of Science ®Google Scholar
• Tormoen G., Sridhar N. and Anderko A.: ‘Localised corrosion of heat treated alloys Part 1– Repassivation potential of alloy 600 as function of solution chemistry and thermal aging’, Corros. Eng. Sci. Technol., 2010, 45, (2), 155–162.
   Web of Science ®Google Scholar
• Anderko A., Sridhar N. and Tormoen G.: ‘Localised corrosion of heat-treated alloys Part II – Predicting grain boundary microchemistry and its effect on repassivation potential’, Corros. Eng. Sci. Technol., 2010, 45, (3), 204–223.
   Web of Science ®Google Scholar
• Shoushtari M. R. T. , Moayed M. H. and Davoodi A.: ‘Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3·5%NaCl’, Corros. Eng. Sci. Technol., 2011, 46, (4), 415–424.
   Web of Science ®Google Scholar
• Mohamed F. A. , Shen-Ann S. and Langdon T. G. : ‘The activation energies associated with superplastic flow’, Acta Metall., 1975, 23, (12), 1443–1450.
   Google Scholar
• Shariat P., Vastava R. B. and Langdon T. G. : ‘An evaluation of the roles of intercrystalline and interphase boundary sliding in two-phase superplastic alloys’, Acta Metall., 1982, 30, (1), 285–296.
   Google Scholar
• Xun Y. and Mohamed F. A. : ‘Superplastic behavior of Zn–22%Al containing nano-scale dispersion particles’, Acta Mater., 2004, 52, (15), 4401–4412.
   Web of Science ®Google Scholar
• Okamoto H.: ‘Al–Zn (aluminum–zinc)’, J. Phase Equil., 1995, 16, (3), 281–282.
   Web of Science ®Google Scholar
• Devillers L. P. : ‘The mechanism of aqueous intergranular corrosion in zinc–aluminium alloys’, PhD thesis, University of Waterloo, Ontario, Canada, 1974.
   Google Scholar
• Zhang Y., Yang L., Zeng X., Zheng B. and Song Z.: ‘The mechanism of anneal-hardening phenomenon in extruded Zn–Al alloys’, Mater. Des., 2013, 50, 223–229.
   Web of Science ®Google Scholar
• Natesan M., Venkatachari G. and Palaniswamy N.: ‘Kinetics of atmospheric corrosion of mild steel, zinc, galvanized iron and aluminium at 10 exposure stations in India’, Corros. Sci., 2006, 48, (11), 3584–3608.
   Web of Science ®Google Scholar
• Williams D., Koehl B., Berry W. and Bartlett E.: ‘The corrosion behavior of Zn–22Al alloy sheet’, J. Electrochem. Soc., 1971, 118, (10), 1684–1688.
   Web of Science ®Google Scholar