References
- Shaw B: ‘ASM handbook’, Vol. 7, 978–1005; 1998, Materials Park, OH, ASM International.
- German RM: ‘Powder metallurgy of iron and steel’, 437–460; 1998, New York, John Wiley.
- Klar E and Samal P: ‘Powder metallurgy stainless steel’; 2007, Materials Park, OH, ASM International.
- Lal S and Upadhyaya GS: ‘Sintering of stainless steel and their based composites’, Rev. Powder Metall. Phys. Ceram., 1986, 3, (2), 165–203.
- Shankar J, Upadhyaya A, Balasubramaniam R and Ramesh Kumar AV: ‘Electrochemical behaviour of sintered yttria reinforced ferritic stainless steel’, Powder Metall., 2003, 46, (1), 25–29.
- Shankar J, Upadhyaya A and Balasubramaniam R: ‘Electrochemical behavior of sintered oxide dispersion strengthened stainless steels’, Corros. Sci., 2004, 46, 487–498.
- Lal S and Upadhyaya GS: ‘Effect of Y2O3 addition and sintering period on the properties of P/M 316L austenitic stainless steel’, J. Mater. Sci. Lett., 1987, 6, 761–764.
- Jain J, Kar AM and Upadhyaya A: ‘Effect of YAG addition on sintering of P/M 316L and 434L stainless steels’, Mater. Lett., 2004, 58, 2037.
- Balaji S and Upadhyaya A: ‘Electrochemical behavior of sintered YAG dispersed 316L stainless steel composites’, Mater. Chem. Phys., 2007, 101, (2–3), 310–316.
- Tiwari SM, Balaji S and Upadhyaya A: ‘Sintering and characterization of YAG dispersed ferritic stainless steels’, Mater. Sci. Eng. A, 2008, A492, (1–2), 60–67.
- German RM: ‘Supersolidus liquid phase sintering of prealloyed powders’, Metall. Mater. Trans. A, 1997, 28A, 1553–1567.
- Katz JD: ‘Microwave sintering of ceramics’, Ann. Rev. Mater. Sci., 1992, 22, 153.
- Agrawal D: ‘Metal parts from microwaves’, Mater. World, 1999, 7, (11), 672–673.
- Roy R, Agrawal D, Cheng J and Gedevanishvili S: ‘Full sintering of powdered-metal bodies in a microwave field’, Nature, 1999, 399, 668.
- Anklekar RM, Agrawal DK and Roy R: ‘Microwave sintering and mechanical properties of P/M steel’, Powder Metall., 2001, 44, (4), 355–362.
- Anklekar RM, Bauer K, Agrawal DK and Roy R: ‘Improved mechanical properties and microstructural development of microwave sintered copper and nickel steel PM parts’, Powder Metall., 2005, 48, (1), 39–46.
- Raja Annamalai A, Kumar R, Upadhyaya A and Agrawal D: ‘Effect of heating mode on sinterability of Fe-Ni steels’, J. Microw. Power Electromagn. Energy, 2011, 45, (4), 162–177.
- Raja Annamalai A, Upadhyaya A and Agrawal D: ‘Effect of heating mode on sintering of ferrous compacts through powder metallurgy route’, Int. Heat Treatment Surface Eng., 2011, 5, (4), 155–160.
- Saitou K: ‘Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders’, Scr. Mater., 2006, 54, 875.
- Panda SS, Singh V, Upadhyaya A and Agrawal D: ‘Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces’, Scr. Mater., 2006, 54, 2179–2183.
- Padmavathi C, Upadhyaya A and Agrawal D: ‘Corrosion behaviour of microwave sintered austenitic stainless steel composites’, Scr. Mater., 2007, 57, 651–654.
- Panda SS, Upadhyaya A and Agrawal D: ‘Effect of heating mode and temperature on sintering of YAG dispersed 434L ferritic stainless steel’, J. Mater. Sci., 2007, 42, 966.
- Panda SS, Upadhyaya A and Agrawal D: ‘Effect of conventional and microwave sintering on the properties of yttria alumina garnet-dispersed austenitic stainless steel’, Metall. Mater. Trans. A, 2006, 37A, 2253.
- Chen L, Ma XC, Wang LM and Ye XM: ‘Effect of rare earth element yttrium addition on microstructures and properties of a 21Cr–11Ni austenitic heat-resistant stainless steel’, Mater. Des., 2011, 32, 2206–2212.
- Yu P, Wang W, Wang FH and Zhu SL: ‘High-temperature corrosion behavior of sputtered K38 nanocrystalline coatings with and without yttrium addition in molten sulfate at 900°C’, Surface Coat. Technol., 2011, 206, 68–74.
- Nayer A (ed.): ‘The metals data book’; 1997, New York, McGraw-Hill.
- Sedriks AJ: ‘Effects of alloy composition and microstructure on the passivity of stainless steels, Corrosion, 1986, 42, (7), 376–388.
- ‘ASM hand book’, Vol. 9, ‘Metallography: an introduction, metallography and microstructures’, 1017; 2004, Materials Park, OH, ASM Internationa1.
- Otero E, Pardo A, Utrilla MV, Saenz E and Alvarez FJ: ‘Corrosion behaviour of AISI 304L and 316L stainless steels prepared by powder metallurgy in the presence of sulphuric and phosphoric acid’, Corros. Sci., 1998, 40, 1421–1434.
- Otero E, Pardo A, Utrilla MV, Saenz E and Hierro MP: ‘A study of the influence of nitric acid concentration on the corrosion resistance of sintered austenitic stainless steels’, Corros. Sci., 1996, 38, 1485–1493.
- Fedrizzi L, Crousier J, Bonora PL and Crousier JP: ‘Corrosion mechanism of an AISI type 316L sintered stainless steels in sodium chloride solution’, Werkst. Korros. 1991, 42, 403–409.