References
- Wright IG and Pint BA: ‘An assessment of the high temperature oxidation behavior of Fe–Cr steels in water vapor and steam’, NACE CORROSION Int., Houston, TX, USA, April 2002, NACE International.
- Wright IG and Dooley RB: ‘A review of the oxidation behaviour of structureal alloys in steam’, Int. Mater. Rev., 2010, 55, 129–167.
- Electric Power Research Institute. Program on Technology Innovation: Oxide Growth and Exfoliation on Alloys Exposed to Steam. Palo Alto, CA, USA, EPRI, 2007.
- Sarver J and Tanzosh J: ‘Steam oxidation testing of candidate Ultrasupercritical boiler materials’, Proc. 28th Int. Tech. Conf. on ‘Coal utilization and fuel systems’, Clearwater, FL, USA, March 2003, Coal Technology Association, pp 1–5.
- Hansson AN and Montgomery M: ‘Steam oxidation of TP347HFG in power plants’, Mater. Sci. Forum, 2006, 522–523, 181–188.
- Hansson A, Montgomery M and Somers M: ‘Development of the inner oxide zone upon oxidation of an austenitic stainless steel’, Mater. High Temp., 2009, 26, 39–44.
- Viswanathan R, Sarver J and Tanzosh JM: ‘Boiler materials for ultra-supercritical coal power plants - steamside oxidation’, J. Mater. Eng. Perform., 2005, 31, 255–263.
- Jianmin J, Montgomery M, Larsen O and Jensen A: ‘Investigation on steam oxidation behaviour of TP347HFG Part 1: Exposure at 256 bar’, Mater. Corros., 2005, 56, 459–467.
- Lukaszewicz M, Simms NJ, Dudziak T and Nicholls JR: ‘Characterisation of oxide scales developed on high temperature resistant alloys in pure steam environments’, Mater. High Temp., 2012, 29, 210–218.
- Young D: ‘Effects of water vapour on the oxidation of chromia formers’, Mater. Sci. Forum, 2008, 595–598, 1189–1197.
- Asteman H, Svensson JE, Norell M and Johansson LG: ‘Influence of water vapour and flow rate on the high - temperature oxidation of 304L; effect of chromium oxide hydroxide evaporation’, Oxid. Met., 2000, 54, 11–26.
- Asteman H, Svensson J and Johansson L: ‘Evidence for chromium evaporation influencing the oxidation of 304L: The effect of temperature and flow rate’, Oxid. Met., 2002, 57, 193–216.
- Halvarsson M, Tang J, Asteman H, Svensson J and Johansson L: ‘Microstructural invastigation of the breakdown of the protective oxides scale on a 304 steel in the presence of the oxygen and water vapour a 600°C’, Corros. Sci., 2006, 48, 2014–2035.
- Holcomb G: ‘Steam oxidation and chromia evaporation in ultrasuperctitical steam boilers and turbines’, J. Electrochem. Soc., 2009, 156, 81–92.
- Huczkowski P, Ertl S, Piron-Abellan J, Christiansen N, Höfler T, Shemet V, Singheiser L and Quadakkers WJ: ‘The effect of component thickness on lifetime and oxidation rate of chromia forming ferritic steels in low and high pO2 environments’, Mater. High Temp., 2005, 22, 79–88.
- Huczkowski P, Christiansen N, Shemet V, Piron-Abellan J, Singheiser L and Quadakkers WJ: ‘Oxidation limited life times of chromia forming ferritic steels’, Mater. Corros., 2004, 55, 825–829.
- Żurek J, Meier G, Essuman E, Hansel M, Singheiser L and Quadakkers W: ‘Effect of specimen thickness on the growth rate of chromia scales on Ni-based alloys in high- and low pO2 gases’, J. Alloys Compd, 2009 465, 450–458.
- Hansson A, Pantleon K, Grumsen F and Somers M: ‘Microstructure evolution during steam oxidation of Nb stabilized austenitic stainless steel’, Oxid. Met., 2009, 73, 289–309.