References
- Wei Q, Pippel E, Woltersdorf J and Grabke HJ: ‘Microprocesses of coke formation in metal dusting’, Mater. Corros., 1999, 50, 628–633.
- Zhang J, Schneider A and Inden G: ‘Characterisation of the coke formed during metal dusting of iron in CO-H2-H2O gas mixtures’, Corros. Sci., 2003, 45, 1329–1341.
- Chun CM, Mumford JD and Ramanarayanan TA: ‘Mechanisms of metal dusting corrosion of iron’, J. Electrochem. Soc., 2002, 149, B348–B355.
- Pippel E, Woltersdorf J and Schneider R: ‘Micromechanisms of metal dusting on Fe-base and Ni-base alloys’, Mater. Corros., 1998, 49, 309–316.
- Zeng Z and Natesan K: ‘Relationship between the growth of carbon nanofilaments and metal dusting corrosion’, Chem. Mater., 2005, 17, 3794–3801.
- Grabke H J and Wolf I: ‘Carburization and oxidation’, Mater. Sci. Eng., 1987, 87, 23–33.
- Grabke H J: ‘Nickel-based alloys in carbonaceous gases’, Corrosion, 2000, 56, 801–808.
- Liu H and Chen W: ‘Effect of pre-oxidation on coke formation and metal dusting of electroplated Ni3Al–CeO2-based coatings in CO–H2–H2O’, Mater. Corros., 2008, 59, 311–318.
- Grabke HJ, Krajak R, Miiller-Lorenz EM and Strauß S: ‘Metal dusting of nickel-base alloys’, Mater. Corros., 1996, 47, 495–504.
- Young DJ, Zhang J, Geers C and Schütze M: ‘Recent advances in understanding metal dusting: A review’, Mater. Corros., 2011, 62, 7–28.
- López LM, Salas O, Melo-Máximo L, Oseguera J, Lepienski CM, Soares P, Torres RD and Souza RM: ‘Structural and mechanical analysis for the optimization of PVD oxide coatings for protection against metal dusting’, Appl. Surf. Sci., 2012, 258, 7306–7313.
- Grabke HJ, Moszynski D, Müller-Lorenz EM and Schneider A: ‘Role of sulphur in carburization, carbide formation and metal dusting of iron’, Surf. Interface Anal., 2002, 34, 369–374.
- Schneider A and Grabke HJ: ‘Effect of H2S on metal dusting of iron’, Mater. Corros., 2003, 54, 793–798.
- Zhang J, Boddington K and Young DJ: ‘Oxidation, carburisation and metal dusting of 304 stainless steel in CO/CO2 and CO/H2/H2O gas mixtures’, Corros. Sci., 2008, 50, 3107–3115.
- Szakalos P, Pettersson R and Hertzman S: ‘An active corrosion mechanism for metal dusting on 304L stainless steel’, Corros. Sci., 2002, 44, 2253–2270.
- Chun CM and Ramanarayanan TA: ‘Metal dusting corrosion of austenitic 304 stainless steel’, J. Electrochem. Soc., 2005, 152, B169–B177.
- Xie J, Crawford M, Davies L, Eisenhawer D, Saunders R and Benum L: ‘An approach to determine the initiation of carburization in a 304H stainless steel piping under petrochemical environment’, Corros. Conf. Expo – NACE Int., Houston, TX, USA, September 2011, NACE, Vol. 4, 3080–3089.
- Gujarathi AM, Patle DS, Agarwal P, Karemore AL and Babu BV: ‘Simulation and analysis of ethane cracking process’, Proc. Int. Symp. 62nd Annual Session IIChE (CHEMCON-2009), Visakhapatnam, India, December 2009, the Indian Institute of Chemical Engineers.
- Chen Q, Schweitzer EJA, Van Den Oosterkamp PF, Berger RJ, De Smet CRH and Marin GB: ‘Oxidative pyrolysis of ethane’, Ind. Eng. Chem. Res., 1997, 36, 3248–3251.
- Hill RA: ‘INEOS Olefins & Polymers USA: Medium pressure steam intervention in an olefin cracking furnace decoke procedure’, US Patent 0060586, 2014.
- Cai H, Krzywicki A and Oballa MC: ‘Coke formation in steam crackers for ethylene production’, Chem. Eng. Process., 2002, 41, 199–214.
- Zhang J, Schneider A and Inden G: ‘Cementite decomposition and coke gasification in He and H2–He gas mixtures’, Corros. Sci., 2004, 46, 667–679.
- Todd EC, Sherman DM and Purton JA: ‘Surface oxidation of pyrite under ambient atmospheric and aqueous (pH = 2 to 10) conditions: Electronic structure and mineralogy from X-ray absorption spectroscopy’, Geochim. Cosmochim. Acta, 2003, 67, 881–893.
- Legrand DL, Nesbitt HW and Bancroft GM: ‘X-ray photoelectron spectroscopic study of a pristine millerite (NiS) surface and the effect of air and water oxidation’, Am. Mineral., 1998, 83, 1256–1265.