An overview of dynamic compaction in powder metallurgy

References

• Y. Sano: J. Eng. Mater., Trans. ASME, 1988, 110, 355–360.
   Google Scholar
• Y. Sano: Int. J. Powder Metall. Powder Technol, 1977, 13, 81–98.
   Web of Science ®Google Scholar
• G. Sethi: ‘Pressing to full density — fundamental limitations and capabilities of high density powder metallurgy’, MSc thesis, The Pennsylvania State University, University Park, PA, USA, 2004.
   Google Scholar
• R. M. German: ‘Powder metallurgy science’, 2nd edn; 1994, Princeton, NJ, Metal Powder Industries Federation.
   Google Scholar
• R. M. German: ‘Sintering theory and practice’, 1st edn; 1996, New York, John Wiley & Sons Inc.
   Google Scholar
• Y. Morimoto, T. Hayashi and T. Takei: Int. J. Powder Metall Powder Technol., 1982, 18, 129–145.
   Web of Science ®Google Scholar
• H. H. Hausner and M. M. Kumar: ‘Handbook of powder metallurgy’, 2nd edn; 1982, New York, Chemical Publication.
   Google Scholar
• G. L. Workman and J. L. Walker: Mater. Sci. Forum, 1996, 210-213, 679–686.
   Google Scholar
• A. L. Dawson, S. Pelletier and J. F. Bussiere: Adv. Powder Metall Part. Mater., 1996, 2, 7.303.
   Google Scholar
• E. Pavier and P. Doremus: Adv. Powder Metall Part. Mater., 1996, 2, 27–39.
   Google Scholar
• D. T. Gethin, V. D. Tran, R. W. Lewis and A. K. Ariffin: Int. J. Powder Metall. Powder Technol., 1994, 30, 385–398.
   Web of Science ®Google Scholar
• S. Shima and M. A. E. Saleh: Adv. Powder Metall Part. Mater., 1993, 3, 175–188.
   Google Scholar
• L. Huang and V. M. Puri: Part. Sci. Technol., 2000, 18, 257–274.
   Web of Science ®Google Scholar
• J. R. L. Trasorras, S. Krishnaswami, L. V. Godby and S. Armstrong: Adv. Powder Metall. Part. Mater., 1995, 1, 2-153-2-167.
   Google Scholar
• S. Shima, K. Hidetoshi and Y. Yasushi: J. Jpn Soc. Powder Powder Metall, 2000, 47, 1312–1317.
   Google Scholar
• Y. Sano: Int. J. Powder Metall. Powder Technol, 2002, 38, 41–47.
   Google Scholar
• H. Lippmann, V. Mannl, N. Bontcheva, R. Iankov and O. Beer: Arch. Appl. Mech., 1997, 67, 191–199.
   Web of Science ®Google Scholar
• B. Hwang and S. Kobayashi: Int. J. Mach. Tool. Manuf, 1991, 31, 123–137.
   Web of Science ®Google Scholar
• T. Nakagawa and M. Satoh: Res. Dev. Kobe Steel Eng. Rep., 1994, 44, 22–25.
   Google Scholar
• A. Jagota and P. R. Dawson: Acta Metall, 1988, 36, 2551-2573.
   Google Scholar
• E. Y. Gutmanas and A. Lawley: Prog. Powder Metall, 1984, 39, 653–667.
   Google Scholar
• E. Y. Gutmanas: Powder Metall Int., 1983, 15, 129–132.
   Web of Science ®Google Scholar
• E. Y. Gutmanas: Powder Metall Int., 1980, 12, 178–182.
   Web of Science ®Google Scholar
• I. Hauer, M. Larsson and U. Engstrom: ‘Properties of high-strength PM materials obtained by different compaction methods in combination with high temperature sintering’; 2004, Hi5gands, Hi5gands AB.
   Google Scholar
• P. Skoglund, M. Kejzelman and I. Hauer: ‘High-density PM components by high velocity compaction’; 2004, HEigands, Hi5gands AB.
   Google Scholar
• HAWK Precision Components Group: available at: http:// www.hawkprecision.com , 2004.
   Google Scholar
• Anonymous : Met. Powder Rep., 2002, 57, 26–30.
   Google Scholar
• G. Ryuichiro: in ‘Business briefing: global automotive manufactur-ing and technology’, 44-45; 2003, London, Business Briefings.
   Google Scholar
• M. Eriksson, M. Anderson, E. Adolfsson and E. Carlstrom: Proc. Conf. ‘EURO PM 2003’, 63-68; 2003, Shrewsbury, EPMA.
   Google Scholar
• Hydropulsor AB: available at: http://www.hydropulsor.com , 2004.
   Google Scholar
• Dynamic Forming Sweden AB: available at: http://www.adiabatica. com , 2004.
   Google Scholar
• P. A. Vityaz and O. V. Roman: Proc. 13th Int. Conf. on ‘Machine tool design research’, 441-447; 1972, London, MacMillan.
   Google Scholar
• N. N. Thadhani, A. Advani, I. Song, E. Dunbar, A. Grebe and R. A. Graham: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 271-282; 1992, New York, Marcel Dekker.
   Google Scholar
• N. E. Elliot and K. P. Staudhammer: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 371-382; 1992, New York, Marcel Dekker.
   Google Scholar
• W. H. Gourdin: Frog. Mater. Set, 1986, 30, 39–80.
   Web of Science ®Google Scholar
• M. A. Meyers: ‘Dynamic behavior of materials’, 1st edn; 1994, New York, Wiley-Interscience.
   Google Scholar
• M. W. Petrie and N. W. Page: J. Appl. Phys., 1991, 69, 3517–3524.
   Web of Science ®Google Scholar
• W. Herrmann: Proc. Winter Annual Meet. on ‘ASME, applied mechanics aspects of nuclear effects in materials’, Washington, DC, USA, December 1971, ASME, 142-168.
   Google Scholar
• R. K. Linde, L. Seaman and D. N. Schmidt: J. Appl. Phys., 1972, 43, 3367.
   Web of Science ®Google Scholar
• O. V. Roman, A. P. Mirilenko and I. M. Pikus: Soy. Powder Metall., 1990, 28, 840–844.
   Google Scholar
• A. B. Sawaoka (ed.): ‘Shock waves in materials science’, 1st edn, 227; 1993, New York, Springer-Verlag.
   Google Scholar
• T. J. Ahrens, G. M. Bond, W. Yang and A. B. Sawaoka: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 339-352; 1992, New York, Marcel Dekker.
   Google Scholar
• S. Wang and R. Davies: Proc. 9th Int. Conf. on ‘Machine tool design research’, Birmingham, UK, 163; 1969, Oxford, Pergamon.
   Google Scholar
• V. D. Linse: Proc. Sagamore Army Materials Research Conf., Lake Luzerne, NY, USA, July 1985, 381-404; 1985, New York, Plenum Press.
   Google Scholar
• B. R. Krueger and T. Vreeland: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 245-252; 1992, New York, Marcel Dekker.
   Google Scholar
• ASM International: ‘Metals handbook’ Vol. 2, ‘Properties and selection: nonferrous alloys and special-purpose materials’, 10th edn; 1990, Metals Park, OH, ASM International.
   Google Scholar
• P. D. Harvey: ‘Engineering properties of steels’, 8th edn, 527; 1982, Metals Park, OH, ASM International.
   Google Scholar
• W. H. Gourdin: Metall. Trans. A, 1984, 15A, 1653–1664.
   Web of Science ®Google Scholar
• J. E. Smugeresky and W. H. Gourdin: in ‘Metallurgical applica-tions of shock-wave and high-strain-rate phenomena’, (ed. L. E. Murr et al), 1st edn, 107-128; 1986, New York, Marcel Dekker.
   Google Scholar
• W. H. Gourdin: J. Appl. Phys., 1984, 55, 172–181.
   Web of Science ®Google Scholar
• R. Pruemmer: Materialwiss. Werkstofftech., 1989, 20, 410–415.
   Web of Science ®Google Scholar
• O. V. Roman, V. F. Nesterenko and I. M. Pikus: Combust. Expl. Shock, 1979, 15, 644–649.
   Web of Science ®Google Scholar
• A. B. Sawaoka and Y. Hone: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 323-338; 1992, New York, Marcel Dekker.
   Google Scholar
• A. G. Mamalis, I. N. Vottea and D. E. Manolakos: J. Mater. Process. TechnoL, 2001, 108, 165–178.
   Web of Science ®Google Scholar
• A. Ferreria and M. A. Meyers: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 361-370; 1992, New York, Marcel Dekker.
   Google Scholar
• B. Lemcke and D. Raybould: ‘Method of compacting powder’, US patent no. 4255374, 1981.
   Google Scholar
• I. D. Radomyselskii, G. G. Sedyuk, M. B. Trakhtenberg, M. B. Shtern and L. A. Maksimenko: Poroshk. Metall., 1974, 11, 10–15.
   Google Scholar
• V. G. Gorobtsov, A. P. Mirolenko and I. M. Pikus: Fiz. Goren. Vzryva, 1987, 23, 54–57.
   Google Scholar
• R. Davies and S. Elwakil: J. Nucl. Mater., 1976, 3, 483–488.
   Google Scholar
• S. Elwakil and R. Davies: Proc. 13th Int. Conf. on ‘Machine tool design research’, 435-440; 1973, Oxford, Pergamon Press.
   Google Scholar
• O. V. Roman, V. G. Gorbstov, and I. M. Pikus: Proc. Int. Conf. on ‘High energy rate fabrication’, San Antonio, TX, USA, June 1984, ASME, 123.
   Google Scholar
• D. Raybould: Int. J. Powder Metall Powder TechnoL, 1980, 16, 9–19.
   Web of Science ®Google Scholar
• G. V. Belyakov, V. N. Rodinov and V. P. Samosadnyi: Combust. Expl. Shock., 1977, 13, 524–528.
   Web of Science ®Google Scholar
• R. M. Rusnak: Int. J. Powder Metall. Powder Technot, 1976, 12, 91–99.
   Web of Science ®Google Scholar
• W. H. Gourdin and D. H. Lassila: Acta Metall. Mater., 1991, 39, 2337–2348.
   Google Scholar
• G. R. Johnson and W. H. Cook: Proc. 7th Int. Symp. on ‘Ballistics’, The Hague, Netherlands, April 1983, ADPA, 541-547.
   Google Scholar
• C. Y. Chiem: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 69-86; 1992, New York, Marcel Dekker.
   Google Scholar
• B. O. Reinders and H. D. Kunze: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al.), 1st edn, 127-136; 1992, New York, Marcel Dekker.
   Google Scholar
• J. Lankford, H. Couque, A. Bose and C. E. Anderson: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 137-146; 1992, New York, Marcel Dekker.
   Google Scholar
• R. S. Coates and K. T. Ramesh: in ‘Shock wave and high strain rate phenomena in materials’, (ed. M. A. Meyers et al), 1st edn, 203-212; 1992, New York, Marcel Dekker.
   Google Scholar
• Anonymous: ‘Iron and steel powders for sintered components’ ; 2002, Hodgands, Hagands AB.
   Google Scholar
• T. Kathrina and R. D. Rawlings: Br. Ceram. Trans., 1996,95, 233–237.
   Google Scholar
• A. L. Dawson, L. Piche and A. Hamel: Powder Metall., 1996, 39, 275.
   Web of Science ®Google Scholar
• A. L. Dawson and J. F. Bussiere: Proc. 1997 Int. Conf. on ‘Powder metallurgy and particulate materials’, Chicago, IL, USA, June—July 1997, Metal Powder Industries Federation, 16.67-16.81.
   Google Scholar
• H. Assadi, F. Gartner, T. Stoltenhoff and H. Kreye: Acta Mater., 2003, 51, 4379–4394.
   Web of Science ®Google Scholar
• D. Halliday, R. Resnick and J. Walker: ‘Fundamentals of physics’, 7th edn; 2005, New York, John Wiley & Sons Inc.
   Google Scholar
• D. Poquillon, J. Lemaitre, V. Baco-Carles, P. Tailhades and J. Lacaze: Powder Technot, 2002, 126, 65–74.
   Web of Science ®Google Scholar
• D. Poquillon, J. Lemaitre, V. Baco-Carles, P. Tailhades and J. Lacaze: Powder Technot, 2002, 126, 75–84.
   Web of Science ®Google Scholar
• K. Takashima, H. Tonda, I. Shimizu, N. Tomonoh and M. Miyamoto: J. Jpn Inst. Met., 1990, 54, 581–588.
   Web of Science ®Google Scholar
• N. C. Iyer, W. R. Lovic and A. T. Male: Ind Heat., 1986, 53, 18–21.
   Google Scholar
• G. M. Krishnamoorthy: Powder Metall., 1971, 14, 164–178.
   Web of Science ®Google Scholar
• E. M. Stein, J. R. V. Orsdal and P. V. Schneider: Met. Prog., 1964, 85, 83.
   Google Scholar
• D. Raybould: Proc. 15th Int. Conf. on ‘Machine tool design and research’, Birmingham, UK, September 1974, 627-636; 1975, London, MacMillan.
   Google Scholar
• K. Kawakita and K. H. Luedde: Powder Technot, 1971, 4, 61–68.
   Web of Science ®Google Scholar
• P. J. Denny: Powder TechnoL, 2002, 127, 162–172.
   Web of Science ®Google Scholar
• S. Elwakil and R. Davies: Proc. Int. Conf. on ‘The use of high energy rate methods for forming, welding and compaction’, Leeds, UK, March 1973, University of Leeds, Paper 16.
   Google Scholar
• M. A. Kaiser: ‘Advancements in split Hopkinson bar test’, MSc thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA, 1998.
   Google Scholar
• L. W. Garber and J. K. Beddow: Powder Metall. Int., 1974, 6, 78–82.
   Google Scholar
• G. Jiang, G. S. Daehn, J. J. Lannutti, Y. Fu and R. H. Wagoner: Acta Mater., 2001, 49, 1471–1477.
   Web of Science ®Google Scholar
• D. J. Benson: Wave Motion, 1995, 21, 85–99.
   Web of Science ®Google Scholar
• K. Niwase, T. Homae, M. Fujiwara, K. G. Nakamura and K. Kondo: Mater. Trans., 2004, 45, 5–8.
   Web of Science ®Google Scholar
• J. R. Asay and M. Shahinpoor: ‘High-pressure shock compression of solids’, 1st edn, 393; 1993, New York, Springer-Verlag.
   Google Scholar
• S. Elwakil, D. Sherif and R. Davies: Powder Metall., 1973, 16, 72–87.
   Web of Science ®Google Scholar
• M. Yousuff and N. W. Page: Powder Technot, 1993, 76, 299–307.
   Web of Science ®Google Scholar
• M. Yousuff and N. W. Page: Powder Technot, 1993, 76, 155–164.
   Web of Science ®Google Scholar