Processing of fibre reinforced thermoplastic composites

References

• A. Offringa: Proc. 37th ISTC, Seattle, WA, USA, October—November 2005, SAMPE, Thermoplastics, Part 1 Session, on CD-rom.
   Google Scholar
• V. K. Stokes: J. Eng. Mater. Technol. Trans. ASME, 1995, 117, (4), 448–455.
   Web of Science ®Google Scholar
• K. K. Chawla: ‘Composite materials science and engineering’, 2nd edn, 126; 1998, New York, Springer-Verlag New York, Inc.
   Google Scholar
• K. K. Chalwa: ‘Fibrous materials’; 1998, Cambridge, Cambridge University Press.
   Google Scholar
• A. M. Vodermayer, J. C. Kaerger and G. Hinrichsen: Compos. Maim!, 1993, 4, 123–132.
   Google Scholar
• N. Turton and J. McAinsh: ‘Thermoplastic compositions’, US patent no. 3785916, 1974.
   Google Scholar
• J. D. Muzzy, B. Varughese, V. Thammongkol and W. Tincher: SAMPE J., 1989, 25, (5), 15–21.
   Web of Science ®Google Scholar
• D. J. Lind and V. J. Coffey: UK patent no. 1485586, 1977.
   Google Scholar
• L. A. Carlsson: ‘Thermoplastic composite materials’; 1991, Amsterdam, Elsevier Science Publishers.
   Google Scholar
• N. Svensson, R. Shishoo and M. Gilchrist: J. Thermoplast. Compos. Mater., 1998, 11, (1), 22–56.
   Web of Science ®Google Scholar
• J. E. O'Connor: ‘Reinforced plastic’, US patent no. 4680224, July 1987.
   Google Scholar
• S. R. Clemans, E. D. Western and A. C. Handermann: Mater. Eng., 1988, 105, 27–30.
   Google Scholar
• S. Padaki and L. T. Drzal: J. Compos. Mater., 1997, 31, (21), 2202–2227.
   Web of Science ®Google Scholar
• A. M. Vodermayer, J. C. Kaerger and G. Hinrichsen: Compos. Maim!, 1993, 4, 123–132.
   Google Scholar
• T. Hartness: J. Thermoplast. Compos. Mater., 1988, 1, 210–220.
   Google Scholar
• E. Werner: Proc. 42nd Int. SAMPE Symp., Anaheim, CA, USA, May 1997, SAMPE, 706-719.
   Google Scholar
• S. R. Iyer and L. T. Drzal: J. Thermoplast. Compos. Mater., 1990, 3, 325–355.
   Google Scholar
• M. Rath, S. Kreuzberger and G. Hinrichsen: Composites A, 1998, 29A, 933–938.
   Google Scholar
• A. Wiiginger, M. Pabler, P. Mitschang and M. Neitzal: Proc. 45th Int. SAMPE Symp., Long Beach, CA, USA, May 2000, SAMPE.
   Google Scholar
• FIBROComp JEC Company, available at: www.fibroline.com (accessed 25 June 2006).
   Google Scholar
• S. Padaki S and L. T. Drzal: Composites A, 1999, 30A, (3), 325–337.
   Google Scholar
• T. G. Gutowski, Z. Cai, J. Kingery and S. J. Wineman: SAMPE Q., 1986, 17, (4), 54–58.
   Google Scholar
• M. L. Rommel, L. Konopka and P. M. Hergenrother: SAMPE Techn. Conf., 1996, 28, 1.
   Web of Science ®Google Scholar
• G. M. Wu and J. M. Schultz: Polym. Compos., 2000, 21, (2), 223–230.
   Web of Science ®Google Scholar
• U. K. Vaidya, G. Husman, J. Serrano and R. Brannon: Proc. Conf. Composites 2005, Columbus, OH, USA, September 2005, American Composites Manufacturer's Association, on CD-rom.
   Google Scholar
• The A to Z of materials, available at: www.azom.com (accessed July 2007).
   Google Scholar
• R. Dyksterhouse and J. A. Dyksterhouse: ‘Method for fiber coating with particles’, US patent no. 5128199, 1992.
   Google Scholar
• T. Hartness, G. Husman, J. Koening and J. Dyksterhouse: Composites A, 2001, 32A, (8), 1155–1160.
   Google Scholar
• A. Trende, B. T. Astrom, A. Wöginger, C. Mayer and M. Neitzel: Composites A, 1999, 30A, (8), 935–943.
   Google Scholar
• P. Mitschang, M. Blinzler and A. Wöginger: Compos. Sci. Technol., 2003, 63, (14), 2099–2110.
   Web of Science ®Google Scholar
• B. Strong: ‘Plastics: materials and processing’; 2002, Upper Saddle River, NJ, Prentice Hall Publishers.
   Google Scholar
• B. D. Choi, O. Diestel and P. Offermann: ‘Advancement of commingling hybrid yarns for fiber reinforced thermoplastics’, Institut för Textil- und Bekleidungstechnik, Technische Universitat Dresden, Germany.
   Google Scholar
• M. D. Wakeman, L. Zingraff, P. E. Bourban, J. A. E. Manson and P. Blanchard: Compos. Sci. Technol., 2006, 66, 19–35.
   Web of Science ®Google Scholar
• R. Alagirusamy and V. Ogale: J. Thermoplast. Compos. Mater., 2005, 18, 269–285.
   Web of Science ®Google Scholar
• R. Nygard and N. Gustafson: J. Thermoplast. Compos. Mater., 2004, 17, 167–184.
   Web of Science ®Google Scholar
• N. Bernet, M. D. Wakeman, P. E. Bourban and J.-A. E. Manson: Composites A, 2002, 33A, (4), 495–506.
   Google Scholar
• N. Bernet, V. Michaud, V. Bourban and J.-A. E Manson: J. Compos. Mater., 1999, 33, 8, 751–772.
   Web of Science ®Google Scholar
• Available at: www.twintex.com (accessed July 2007).
   Google Scholar
• S. Y. Fu, X. Hu and C. Y. Yue: Mater. Sci. Res. Int., 1999, 5, (2), 74–83.
   Web of Science ®Google Scholar
• V. Michaud and J.-A. E. Manson: J. Compos. Mater., 2001, 35, (13), 1150–1173.
   Web of Science ®Google Scholar
• M. C. Altan: J. Thermoplast. Compos., 1990, 3, 275–268.
   Google Scholar
• A. Whelan and J. P. Goff: Developments in injection molding, developments in injection moulding', 1985, Amsterdam, Elsevier Applied Science Publisher.
   Google Scholar
• R. Eduljee and R. L. McCullough: in ‘Delaware composites design encyclopedia’, 381; 1993, Lancaster, PA, Technomic Publications.
   Google Scholar
• T. Skourlis, C. Chassapis and S. Manoochehri: J. Thermoplast. Compos., 1997, 10, 453.
   Web of Science ®Google Scholar
• M. Vincent: in ‘Structure development during polymer proces-sing’, (ed. A. M. Cunha and S. Fakirov), 345-363; 2000, Dordrecht, Kluwer.
   Google Scholar
• T. D. Papathanasiou: in ‘Flow-induced alignment in composite materials’, (ed. T. D. Papathanasiou and D. C. Guell), 113-165; 1997, Cambridge, Woodhead Publishing Ltd.
   Google Scholar
• M. Vincent, T. Giroud, A. Clarke and C. Eberhardt: Fluid Phase Equilib., 2005, 234, (1-2), 6719–6725.
   Google Scholar
• S. G. Advani and C. L. Tucker: J. RheoL, 1987, 31, (8), 751–784.
   Web of Science ®Google Scholar
• M. J. Crochet, F. Dupret and V. Verley: in ‘Composite materials series’, Vol. 10, ‘Flow and rheology in polymer composites manufacturing’, Chap. 11; 1994, Amsterdam, Elsevier.
   Google Scholar
• T. Whelan and J. Goff: Br. Plast. Rubber, 1986, 32, 29–30.
   Google Scholar
• S. G. Advani and C. L. Tucker: J. Rheol., 1987, 31, (8), 751.
   Web of Science ®Google Scholar
• R. S. Bay and C. L. Tucker: Polym. Compos., 1992, 13, (1), 317.
   Google Scholar
• M. Gupta and K. K. Wang: Polym. Compos., 1993, 14, (5), 367.
   Web of Science ®Google Scholar
• R. Schweizer: Polym. Plast. Technol. Eng., 1982, 18, (1), 81–91.
   Web of Science ®Google Scholar
• R. F. Eduljee, R. L. McCullough and J. W. Gillespie: Polym. Eng. Sci., 1994, 34, (4), 352–360.
   Web of Science ®Google Scholar
• J. C. Halpin and S. W. Tsai: ‘Elastic properties of composites’, Technical report AFMLTR-67-423, US Air Force, 1967.
   Google Scholar
• D. Nichols: Adv. Mater. Process., 1994, 146, (4), 29–32.
   Web of Science ®Google Scholar
• E. Seiler, M. Welz and H. H. Wald: Kunstst. Germ. Plast., 1982, 72, (6), 10–14.
   Google Scholar
• G. Spur and St Liebelt: Kunstst. Plast. Eur., 1997, 87, (4), 12–15.
   Google Scholar
• H. H. Wald and H. Schriever: Kunstst. Germ. Plast., 1985, 75, (8), 21–24.
   Google Scholar
• M. D. Bigg: Plast. Eng., 1990, 46, (10), 33-34, 45.
   Google Scholar
• V. Michaud, R. Törnqvist and J.-A. E. Manson: J. Compos. Mater., 2001, 35, (13), 1174–1200.
   Web of Science ®Google Scholar
• V. Michaud and J.-A. E. Manson: J. Compos. Mater., 2001, 35, (13), 1150–1173.
   Web of Science ®Google Scholar
• Reinf Plast., 1997, 41, (10), 4.
   Google Scholar
• A. Oelgarth, H. Dittmar, W. Stockreiter and H. H. Wald: Kunstst. Plast. Eur., 1998, 88, (4), 6–8.
   Google Scholar
• Available at: http://www.lawtonmachinery.com (accessed July 2007).
   Google Scholar
• R. C. Hawley: ‘Extruder apparatus and process for compounding thermoplastic resin and fibers’, US patent no. 5165941, 4 November 1992.
   Google Scholar
• Available at: http://www.husky.ca/de/products/qtech (accessed July 2007).
   Google Scholar
• R. Bruessel, G. Heinrich, W. Krause and F. Henning: Proc. Int. SAMPE Techn. Conf., San Diego, CA, USA, November 2004, SAMPE, 3145-3158.
   Google Scholar
• J. L. Thomason and M. A. Vlug: Composites A, 1996, 27A, 477–484.
   Web of Science ®Google Scholar
• A. Lutz and T. Harmia: in ‘Polypropylene: an A—Z reference’, (ed. J. Karger-Kocsis), 301-306; 1999, London, Kluwer.
   Google Scholar
• R. A. Schweizer: Proc. 36th Ann. SPI Conf., Washington, DC, USA, February 1981, SPI, 1-4.
   Google Scholar
• B. Sanschagrin, P. Ehrhardt and B. Fisa: Proc. 46th Ann. SPI conf., Washington, DC, USA, February 1991, SPI, 1-10.
   Google Scholar
• A. Kelly and W. R. Tyson: J. Mech. Phys. Solids, 1965, 13, 329–350.
   Web of Science ®Google Scholar
• A. Hauptli and J. Winski: Plast. Addit. Compd, September/ October 2003, 5, (5), 36-39.
   Google Scholar
• Dieffenbacher direct process, available at: http://www.dieffenba-cher.de/e/news/artikel/index.html (accessed July 2007).
   Google Scholar
• J. H. Schut: Plast. Technol., 2004, 50, (12), 37–39.
   Google Scholar
• O. Geiger, F. Henning, P. Eyerer, R. Brussel and H. Ernst: Reinf Plast., 2006, 50, (1), 30–35.
   Google Scholar
• J. H. Schut: Plast. Technol., 2004, 50, (7), 66–69.
   Google Scholar
• S. Bartus, U. K. Vaidya and C. A. Ulven: J. Thermoplast. Compos. Mater., 2006, 19, (2), 131–154.
   Web of Science ®Google Scholar
• U. K. Vaidya, K. Thattaiparthasarthy and S. Pillay: Composites Part A: Appl. Set Manuf.
   Google Scholar
• U. K. Vaidya, J. Serrano, A. Villalobos, J. Sands and J. Garner: Mater. Des., 2008, 29, (2), 305–318.
   Web of Science ®Google Scholar
• W. Schijve: Proc. 8th Int. AVK-TV Conf. on ‘reinforced plastics’, (ed. R. Kleinhobz), Baden, Germany, September 2005, AVK-TV, on CD-rom.
   Google Scholar
• K. Edelmann and M. Neitzel: Kunstst. Plast. Eur., 1997, 12, 13–15.
   Google Scholar
• T. Osswald: ‘Compression molding’; 2004, New York, Hansen Publishers.
   Google Scholar
• `Cadpress-thermoplastic, theory manual'; 2001, Madison, WI, M-Base/The Madison Group.
   Google Scholar
• Y. F. Shutlin: Vysokomolekularnye Soedineniya A, 1991, 33A, (1), 120–127.
   Google Scholar
• C. W. Jackson, F. Folgar and C. L. Tucker: in ‘Polymer blends and composites in multiphase systems’, 279-299; 1984, Washingtong, DC, ACS.
   Google Scholar
• J. C. Halpin: J. Compos. Mater., 1969, 3, 732.
   Web of Science ®Google Scholar
• S. W. Tsai and V. D. Azzi: Experim. Mech., 1965, 5, 283–288.
   Google Scholar
• J. C. Halpin and J. L. Kardos: Polym. Eng. Sci., 1976, 16, (5), 344–352.
   Web of Science ®Google Scholar
• `ANSYS applications — case study reviews', 7.24-7.39; 1983, Canonsburg, PA, Swanson Analysis Systems Inc.
   Google Scholar
• N. G. Chavka and J. S. Dahl: Proc. 44th Int. SAMPE Symp. on ‘Evolving and revolutionary technologies for the new millennium’, Long Beach, CA, USA, May 1999, SAMPE, Vol. 44, 281-292.
   Google Scholar
• H. Ning, U. K. Vaidya, G. M. Janowski and G. Husman: Compos. Struct., Sept. 2007, 80, (1), 105-116.
   Google Scholar
• M. Ahrens, V. Mallick and K. Parfrey: Proc. 1998 IEEE Int. Conf. on ‘Robotics and automation’, Leuven, Belgium, May 1998, IEEE, Vol. 2, 1148-1153.
   Google Scholar
• R. Brannon: Private Communication, National Composite Center, May 2006.
   Google Scholar
• D. Warren: ‘Modeling of composite preform manufacturing’; 2002, Oak Ridge, TN, Oak Ridge National Laboratory.
   Google Scholar
• D. Heider, M. J. Provoso and J. W. Gillespie, Jr: J. Process. Contr., 2002, 12, 101–111.
   Web of Science ®Google Scholar
• S. Holmes, S. A. Lawson and J. M. Haake: ‘Method for heating and controlling temperature of composite material during automated placement’, US patent no. 06451152, 2002.
   Google Scholar
• J. Schlimbach and P. Mitschang: J. Thermoplast. Compos. Mater., 2006, 19, 5507–529.
   Google Scholar
• R. Schledjewski and M. Latrille: Compos. Set Technol., 2003, 63, (14), 2111–2118.
   Web of Science ®Google Scholar
• G. Beresheim, M. Latrille and R. Schledjewski: Kunstst. Plast. Eur., 2001, 91, 33–34.
   Web of Science ®Google Scholar
• R. Schledjewski and A. K. Schlarb: Proc. SAMPE Int. Symp., Long Beach, CA, USA, April—May 2006, SAMPE, on CD-rom.
   Google Scholar
• R. Schledjewski: Proc. Conf. ECCM 11, Rhodes, Greece, May—June 2004, European Society for Composite Materials, on CD-rom.
   Google Scholar
• G. Beresheim, P. Mitschang and M. Neitzel: Kunstst. Plast. Eur., 2000, 90, (4), 24–25.
   Google Scholar
• R. Pitchumani, S. Ranganathan, R. Don, J. W. Gillespie and M. A. Lamontia: Int. J. Heat Mass Transf, 1996, 39, 1883–1897.
   Web of Science ®Google Scholar
• Available at: http://plastics.milacron.com (accessed July 2007).
   Google Scholar
• S. M. Grove: J. Compos. Mater., 1988, 19, 367–375.
   Web of Science ®Google Scholar
• M. Nejhad, N. Ghasemi, R. D. Cope and S. I. Giiceri: J. Thermoplast. Compos. Mater., 1991, 4, 20–45.
   Google Scholar
• C. E. Carpenter and J. S. Colton: Polym. Compos., 1994, 15, 55–63.
   Web of Science ®Google Scholar
• B. K. Fink, R. L. McCullough and J. W. Gillespie, Jr: Polym. Eng. Sci., 1992, 32, 357–369.
   Web of Science ®Google Scholar
• H. Sarrazin and G. S. Springer: J. Compos. Mater., 1995, 29, (14), 1908–1943.
   Web of Science ®Google Scholar
• C. A. Mahieux: Compos. Struct., 2001, 52, 517–521.
   Web of Science ®Google Scholar
• J. Huemmler, S. K. Lee and K. V. Steiner: Proc. 36th Int. SAMPE Symp., Vol. 36, 2142-2156; 1991, San Diego, CA, SAMPE.
   Google Scholar
• M. L. Enders: Proc. 22nd Int. SAMPE Techn. Conf., Boston, MA, USA, November 1990, SAMPE, 88-97.
   Google Scholar
• R. H. Bradt: ‘Thermoplastic filament winding process’, US patent no. 04010054, 1977.
   Google Scholar
• CADWind 2000, Material S.A., Brussels, Belgium.
   Google Scholar
• H. Lii, M. Schlottermfiller, N. Himmel and R. Schledjewski: J. Thermoplast. Compos. Mater., 2005, 18, S469–487.
   Web of Science ®Google Scholar
• M. Schlottermfiller, R. Schledjewski and P. Mitschang: J. Mater. Design Appl., 2004, 218, S157–164.
   Google Scholar
• M. Schlottermfiller, H. Lii, Y. Roth, N. Himmel, R. Schledjewski and P. Mitschang: J. Thermoplast. Compos. Mater., 2003, 16, (6), 497–519.
   Web of Science ®Google Scholar
• J. P. Nunes, J. F. Silva, L. Silva, P. J. Novo and A. T. Marques: ‘Equipment to produce continuously powder coated thermoplas-tic matrix prepregs’, International patent no. WO 02/06027 Al, 2001.
   Google Scholar
• J. P. Nunes, J. F. Silva, F. W. J. van Hattum and A. T. Marques: Proc. ANTEC 2004, Chicago, IL, USA, May 2004, Society of Plastics Engineers, 1588-1592.
   Google Scholar
• P. J. Shih and A. C. Loos: J. Reinf Plast. Compos., 1999, 18, 1103–1112.
   Web of Science ®Google Scholar
• R. Funck and M. Neitzel: Compos. Manuf, 1995, 6, 189–192.
   Web of Science ®Google Scholar
• O. Christen, G. Beresheim, M. Neitzel and C. Rasche: Kunstst. Plast. Eur., 1999, 89, (4), 79–81.
   Google Scholar
• F. Henninger, J. Hoffmann and K. Friedrich: Composites A, 2002, 33A, (12), 1677–1688.
   Google Scholar
• J. D. Winkle and J. R. Hurdle: Proc. 43rd SPI Ann. Conf., Cincinnati, OH, USA, February 1988, SPI Composites Institute.
   Google Scholar
• B. Lauke, K. Schneider and K. Friedrich: Proc. Conf. ECCM 5, Bordeaux, France, April 1992, European Association for Composite Materials, 313-318.
   Google Scholar
• S. Osten, C. St John, D. Guillon, G. Zanella and T. Renault: Proc. —ANTEC '97, Toronto, Canada, May 1997, SPE, Vol. 2, 2432-2436.
   Google Scholar
• Xperion Advanced Composites and Machines, GmbH, Markdorf, Germany.
   Google Scholar
• S. Giehl and P. Mitschang: Kunst Plast. Eur., 2005, 11, S1–3.
   Google Scholar
• T. E. Chilva and F. S. Deans: Proc. 2nd Conf. on ‘Advanced composites: the latest development’, Dearborn, MI, USA, November 1986, ASM International, 249-251.
   Google Scholar
• M. D. Wakeman and C. D. Rudd: Compos. Set Technol., 2000, 60, 1901–1918.
   Web of Science ®Google Scholar
• M. A. Dweib and C. M. O. Bradaigh: Polym. Compos., 2000, 21, (5), 832–845.
   Web of Science ®Google Scholar
• S. H. Jo and E. G. Kim: J. Mater. Process. Technol., 2002, 130-131, 156–160.
   Web of Science ®Google Scholar
• D. L. Schweikert and R. W. Allan: Proc. SAE Int. Cong., Detroit, MI, USA, March 1982, SAE, Paper 820491.
   Google Scholar
• R. Tornqvist, P. Sunderland and J.-A. E. Manson: Polym. Compos., 2000, 21, (5), 779–788.
   Web of Science ®Google Scholar
• A. Ericsson: `Rheobgy of glass mat reinforced thermoplastics', PhD thesis, EPFL, Lausanne, Switzerland, 1996.
   Google Scholar
• S. Toll and J.-A. E. Manson: Trans. ASME, 1995, 62, (1), 223–226.
   Web of Science ®Google Scholar
• C. Servais and J.-A. E. Manson: Proc.15th Ann. Meet. of Polymer Processing Society, Hertogenbosch, The Netherlands, June 1999, Polymer Processing Society.
   Google Scholar
• D. Bhattacharyya: in ‘Composite materials series’, Vol. 11, ‘Composite sheet forming’, Chap. 6; 1997, Amsterdam, Elsevier.
   Google Scholar
• B. T. Astrom: ‘Manufacturing of polymer composites’; 1997, London: Chapman & Hall.
   Google Scholar
• G. Gruenwald: ‘Thermoforming: a plastics processing guide’, 2nd edn; 1998, Basel, Technomic.
   Google Scholar
• J.L. Throne: ‘Technology of thermoforming’; 1996, Munich, Hanser Verlag.
   Google Scholar
• U. Bruer and M. Neitzel: Polym. Polym. Compos., 1996, 4, (2), 117–123.
   Web of Science ®Google Scholar
• R. Wilhelm: Plastvarlden, 1971, 21, (3), 30–33.
   Google Scholar
• Gunyuzlu Mark and S. Clemens: Technical Paper TP89PUB94, SME, Dearborn, MI, USA, Published 10 January 1989.
   Google Scholar
• S. R. Morris and C. T. Sun: Composites A, 1996, 27A, (8), 633–640.
   Google Scholar
• J. L. Throne: Adv. Polym. Technol., 1989, 9, (4), 309–320.
   Google Scholar
• J. L. Riley: Product. Eng., 1961, 40, (9), 601–610.
   Google Scholar
• R. E. Kostur: Proc. 16th SPE Ann. Techn. Conf., Chicago, IL, USA, January 1960, SPE.
   Google Scholar
• J. Hofstee, H. de Boer and F. van Keulen: Compos. Set Technol., 2000, 60, (7), 1041–1053.
   Web of Science ®Google Scholar
• G. Lebrun, M. N. Bureau and J. Denault: J. Thermoplast. Compos. Mater., 2004, 17, (2), 137–165.
   Web of Science ®Google Scholar
• G. Sala and D. Cutolo: Composites A, 1997, 28A, 637–646.
   Google Scholar
• S. F. Bush, F. G. Torres and J. M. Methven: Composites A, 2000, 31A, 1421–1431.
   Google Scholar
• J. H. Lee and J. H. Vogel: J. Eng. Mater. Technol., 1995, 117, 127–132.
   Web of Science ®Google Scholar
• M. Hou and K. Friedrich: Compos. Struct., 1994, 27, 157–167.
   Web of Science ®Google Scholar
• R. Lahr and P. Mitschang: Proc. 27th Eur. Conf. SAMPE 2006, Paris, France, March 2006, SAMPE, S442-447.
   Google Scholar
• T. Lafuente, J. Nowacki, P. Mitschang, A. Torres Marques and M. Neitzel: J. Thermoplast. Compos. Mated, 2002, 15, (4), 355–371.
   Web of Science ®Google Scholar
• P. Mitschang, M. Blinzler and A. W6ginger: Polym. Polym. Compos., 2003, 11, (4), 277–290.
   Web of Science ®Google Scholar
• Availablt at: http://www.fiberforge.com
   Google Scholar
• J. Krebs, K. Friedrich and D. Bhattacharyya: Composites A, 1988, 29A, 183–188.
   Google Scholar
• S. H. Olsen: ‘Single diaphragm forming of drapeable thermo-plastic impregnated composite materials’, US patent no. 05037599, 1991.
   Google Scholar
• L. M. J. Robroek: Proc. Int. SAMPE Symp. on ‘Advanced materials: performance through technology insertion’, Anaheim, CA, USA, May 1993, SAMPE, Vol. 38, 2032-2044.
   Google Scholar
• J. H. Lee and J. H. Vogel: Proc. 27th Int. SAMPE Techn. Conf., Albuquerque, NM, USA, October 1995, SAMPE, Vol. 27, 750-759.
   Google Scholar
• F. Henninger and K. Friedrich: Composites A, 2004, 35A, 573–583.
   Google Scholar
• H. E. N. Bersee and A. Beukers: Composites A, 2002, 33A, 949–958.
   Google Scholar
• C. M. O'Brádaigh and P. J. Mallon: Compos. Set Technol., 1989, 35, 235–255.
   Web of Science ®Google Scholar
• S. G. Pantelakis and E. A. Baxevani: Composites A, 2002, 33A, 459–470.
   Web of Science ®Google Scholar
• M. R. Monaghan and P. J. Mallon: J. Thermoplast. Compos. Mater., 1990, 3, 202–215.
   Google Scholar
• K. O. Walls and R. J. Crawford: Compos. Manuf, 1995, 6, 245–254.
   Web of Science ®Google Scholar
• S. G. Pantelakis and E. A. Baxevani: Composites A, 2002, 33A, 459–470.
   Web of Science ®Google Scholar
• W. Michaeli and U. Lehmann: Reinf Plast., 1996, 40, 40–43.
   Google Scholar
• S. H. Olson, J. S. Busby and S. A. Needle: ‘Composite bicycle frame and method of manufacturing’, US patent no. 5803476, 1998.
   Google Scholar
• S. J. Davis: ‘Long fiber reinforced thermoplastic frame especially for tennis racquet’, US patent no. 5176858, 1993.
   Google Scholar
• D. F. Walczyk, J. F. Hosford and J. M. Papazian: J. Manuf Set Eng., 2003, 125, 333–343.
   Web of Science ®Google Scholar
• J. Krebs, D. Bhattacharyya and K. Friedrich: Composites A, 1997, 28A, 481–489.
   Google Scholar
• K. J. Channer, W. Cosgriff, G. F. Smith and O. I. Okoli: J. Reinf Plast. Compos., 2002, 21, (18), 1629–1635.
   Web of Science ®Google Scholar
• V. Mauricio, B. Donadon, G. Falzon, L. Iannucci and J. M. Hodgkinson: Composites A, 2007, 38A, (6), 1597–1611.
   Google Scholar
• H. Ninga, G. M. Janowski, U. K. Vaidya and G. Husman: Compos. Struct., 2007, 80, (1), 82–91.
   Web of Science ®Google Scholar
• H. Ning, U. K. Vaidya, G. M. Janowski and G. Husman: Compos. Struct., 2007, 80, (1), 105–116.
   Web of Science ®Google Scholar
• U. Breuer, M. Ostgathe and M. Neitzel: Polym. Compos., 1998, 19, (3), 275–279.
   Web of Science ®Google Scholar
• C. Mayer, X. Wang and M. Neitzel: Composites A, 1998, 29A, 783–393.
   Google Scholar
• M. D.Wakeman, L. Zingraff, P.-E. Bourban, J.-A. E. Manson and P. Blanchard: Compos. Set Technol., 2006, 66, (1), 19–35.
   Web of Science ®Google Scholar
• P. de Luca, P. Lefébure, A. K. Pickett, A. M. Vodermayer and W. Werner: Proc. 28th Int. SAMPE Techn. Conf., Seattle, WA, USA, November 1996, SAMPE, 255-265.
   Google Scholar
• O. Rozant, P.-E. Bourban and J.-A. E. Manson: Composites A, 2000, 31A, 1167–1177.
   Google Scholar
• U. Bruer, M. Neitzel, V. Ketzer and R. Reinicke: Polym. Compos., 1996, 17, (4), 643–647.
   Web of Science ®Google Scholar
• F. Boey, A. C. Lua and Y. Yue: J. Mater. Process. TechnoL, 1993, 38, 327–336.
   Web of Science ®Google Scholar
• H. Suemasu, K. Friedrich and M. Hou: Compos. Manuf, 1994, 5, (1), 31–39.
   Google Scholar
• R. S. Feltman and M. H. Santare: Compos. Manuf, 1994, 5, (4), 203–15.
   Google Scholar
• W. F. Stanley and P. J. Mallon: Composites A, 2006, 37, (6), 939–948.
   Web of Science ®Google Scholar
• T. G. Gutowski, G. Dillon, S. Chey and H. Li: Compos. Manuf, 1995, 6, 123–34.
   Web of Science ®Google Scholar
• G. Prodromou and J. Chen: Composites A, 1997, 213A, 491–503.
   Google Scholar
• F. D'Oria, P. Bourgin and L. Coincenot: Adv. Polym. Technol., 1995, 14, (4), 291–301.
   Web of Science ®Google Scholar
• C. M. O'Bradaigh: in ‘Composite materials series’, Vol. 10, ‘Flow and rheology in polymer composites manufacturing’, (ed. S. G. Advani), Chap. 13, 517-565; 1994, Amsterdam, Elsevier.
   Google Scholar
• D. W. Kim, Y. S. An, J. D. Nam and S. W. Kim: Composites A, 2003, 34A, (7), 673-680.
   Google Scholar
• J. W. Pendleton: ‘Applying ultrasonic vibration to thermoplastic polymers during molding’, US patent no. 3246055, April 1966.
   Google Scholar
• H. E. H. Meijer, R. W. Venderbosh, G. P. Johannes and P. J. Lemstra: High Perform. Polym., 1996, 8, (1), 133–167.
   Web of Science ®Google Scholar
• K. van Rijswijk and H. E. N. Bersee: Composites A, 2007, 38A, (3), 666–681.
   Google Scholar
• L. Zingraff, P. E. Bourban, M. D. Wakeman, M. Kohler and J.-A. E.Manson: Proc. 23rd SAMPE Eur. Conf., Paris, France, April 2002, SAMPE, 237-248.
   Google Scholar
• A. Luiser, P. E. Bourban and J.-A. E. Manson: Proc. Conf. ICCM 12, Paris, France, July 1999, Society of Manufacturing Engineers, Woodhead Publishing, on CD-rom.
   Google Scholar
• J. Ciovacco and S. J. Winckler: Proc. 45th Int. SAMPE Symp., Long Beach, CA, USA, May 2000, SAMPE, on CD-rom.
   Google Scholar
• H. Parton and I. Verpoest: Proc. Conf. ICCM 14, San Diego, CA, USA, July 2003, Society of Manufacturing Engineers, Paper ID 1201.
   Google Scholar
• K. van Rijswijk, D. P. N. Vlasveld, H. E. N Bersee and S. J. Picken: Proc. Conf. ICCST 4, (ed. S. Adali et al.) Durban, South Africa, January 2003, on CD-rom.
   Google Scholar
• D. P. N. Vlasveld, K. van Rijswijk, H. E. N, Bersee, A. Beukers and S. J. N Picken: Proc. Conf. ICCM 14, San Diego, CA, USA, July 2003, Society of Manufacturing Engineers, Paper, TP03PUB357.
   Google Scholar
• J. Sebenda: Prog. Polym. Sci., 1978, 6, 123–167.
   Google Scholar
• D. Kugler, P. J. Joyce and T. J. Moon: J. Compos. Mater., 1997, 31, (17), 1728–1757.
   Web of Science ®Google Scholar
• P. W. Sibal, R. E. Camargo and C. W. Macosko: Proc. 2nd Int. Conf. on ‘Reactive processing of polymers’, Pittsburgh, PA, USA, November 1982, University of Pittsburgh, 97-125.
   Google Scholar
• S. Pillay, U. K. Vaidya and G. M. Janowski: J. Thermoplast. Compos. Mater., 2005, 18, (6), 509–527
   Web of Science ®Google Scholar
• B. T. Astrom, M. Carlsson, A. Carlsson, O. Gunnars and S. Oellers: SAMPE Int. Symp., 1995, 40, 1542.
   Google Scholar
• B. T. Astrom: Proc. 2nd World Pultrusion Conf., Venice, Italy, June 1994, European Pultrusion Technology Association (EPTA).
   Google Scholar
• B. T. Astrom, P. H. Larsson and R. B. Pipes: Compos. Manuf, 1991, 2, 114.
   Google Scholar
• G. Cowen, U. Measuria and R. M. Turner: ‘Section pultrusions of continuous fiber reinforced thermoplastics’; C22/86; 1986, London, Institution for Mechanical Engineers.
   Google Scholar
• J. A. Larock, H. T. Hahn and D. J. Evans: J. Thermoplast Compos. Mater., 1989, 2, 216–229.
   Google Scholar
• H. Ishida and G. Rotter: Proc. SPI Ann. Conf., Cincinnati, OH, February 1988, SPI Composites Institute, 43.
   Google Scholar
• W. I. Lee and G. S. Springer: J. Compos. Mater., 1991, 25, 1632–1652.
   Web of Science ®Google Scholar
• B. T. Astrom and R. B. Pipes: Polym. Compos., 1993, 14, 184.
   Web of Science ®Google Scholar
• D. H. Kim, W. L. Lee and K. Friedrich: Compos. Sci. Technot, 2001, 61, 1065–1077.
   Web of Science ®Google Scholar
• J. E. O'Connor: SAMPE Q., 1987, 18, 32.
   Google Scholar
• J. A. Larock, H. T. Hahn and D. J. Evans: Proc. SPI Ann. Conf., Dallas, TX, USA, February 1989, SPI Composites Institute, Paper 8A.
   Google Scholar
• J. G. Vaughan and T. W. Dillard: J. Thermoplast. Compos. Mater., 1990, 3, 131–149.
   Google Scholar
• W. J. Tomlinson and J. R. Holland: J. Mater. Set Lett., 1994, 13, 675.
   Google Scholar
• W. Michaeli and D. Jiirss: Composites A, 1996, 27A, 3.
   Google Scholar
• P. E. Luisier, R. Bourban, J.-A. E. Manson: Composites A, 2003, 34A, 583–595.
   Web of Science ®Google Scholar
• P. J. Hepola: ‘Thermoplastic pultrusion with on-line dry powder impregnation of fibers’, PhD thesis, University of Delaware, Newark, DE, USA, 1993.
   Google Scholar
• G. Sala and D. Cutolo: Composites A, 1997, 28A, 637–646.
   Google Scholar
• E. L. D'Hooghe and C. M. Edwards: Proc. ANTEC '99, New York, USA, May 1999, SPE, 2703-2708.
   Google Scholar
• K. van de Velde and P. Kiekens: Compos. Struct., 2001, 54, 355–360.
   Web of Science ®Google Scholar
• A. R. Madeniian, N. J. Tessier and N. R. Schott: Proc. SPI Ann. Conf., Reno, NV, USA, October, 1985, SPI Composites Institute, Paper 11F.
   Google Scholar
• R. A. Grimm: Adv. Mater. Process., 1995, 3, 27–30.
   Google Scholar
• R. W. Messler: J. Thermoplast. Compos. Mater., 2004, 17, 51— 75.
   Web of Science ®Google Scholar
• R. Wedgewood and P. E. Hardy: Proc. 28th Int. SAMPE Techn. Conf., Seattle, WA, USA, November 1996, SAMPE, Vol. 28, 850-861.
   Google Scholar
• C. Ageorges, L. Ye and M. Hou: Composites A, 2001, 32A, 839–857.
   Google Scholar
• V. J. Stokes: Polym. Eng. Sci., 1989, 29, (19), 1310–1324.
   Web of Science ®Google Scholar
• S. Kruger, G. Wagner and D. Eifler: Adv. Eng. Mater., 2004, 6, (3), 157–159.
   Web of Science ®Google Scholar
• A. Yousefpour, M. Hojjati and J.-P. Immarigeon: J. Thermoplast. Compos. Mater., 2004, 17, 303–341.
   Web of Science ®Google Scholar
• C. A. Harper: ‘Handbook of materials for product design’, 3rd edn; 2001, New York, McGraw-Hill.
   Google Scholar
• K. K. Chawla Z. Zhang, M. Koopman and U. K. Vaidya: ‘Adhesive bonding and characterization of LFT glass/PP compo-sites’, Unpublished work.
   Google Scholar
• R. Rudolf, P. Mitschang and M. Neitzel: Composites A, 2000, 31A, (11), 1191–1202.
   Google Scholar
• P. Mitschang, R. Rudolf and M. Neitzel: J. Thermoplast. Compos. Mater., 2002, 15, 127–153.
   Web of Science ®Google Scholar
• L. Moser, R. Lahr, R. Velthuis, P. Mitschang and A. K. Schlarb: Proc. 28th SAMPE Eur. Int. Conf., Paris, France, April 2007, SAMPE, 624-629.
   Google Scholar
• Available at: www.cranecomposites.com (accessed September 2007).
   Google Scholar
• Available at: www.curvonline.com (accessed September 2007).
   Google Scholar
• V. Coenen, M. Hatrick, H. Law, D. Brosius, A. Nesbitt and D. Bond: Proc. Conf. SAMPE 2005, ‘New horizons for materials and processing technologies’, Long Beach, CA, USA, May 2005, SAMPE, on CD-rom.
   Google Scholar
• Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi and O. Kamigaito: J. Mater. Res., 1993, 8, 1185.
   Web of Science ®Google Scholar
• Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi and O. Kamigaito: J. AppL Polym. Set, 1993, 49, 1259.
   Web of Science ®Google Scholar
• J. S. Shelly, P. T. Mather and K. L. DeVries: Polymer, 2001, 42, (13), 5849–5858.
   Web of Science ®Google Scholar
• A. Okada: Proc. 55th SPSJ Symp. on ‘Macromolecules’, Toyama, Japan, September 2006, SPSJ, 5134-5136.
   Google Scholar
• C. E. Powell and G. W. Beall: Curr. Opin. Solid State Mater. Sci., 2006, 10, (2), 73–80.
   Web of Science ®Google Scholar
• T. Kurauchi, A. Okada, T. Nomura, T. Nishio, S. Saegusa and R. Deguchi: ‘Nylon 6-clay hybrid-synthesis, properties and applica-tion to automotive timing belt cover’, Technical paper no. 910584, SAE, February 1991.
   Google Scholar