References
- R. J. Roe: ‘Description of crystalline orientation in polycrystalline materials’, J. Appl. Phys., 1965, 36, 2024–2027.
- C. M. Sayers: ‘Ultrasonic velocities in anisotropic polycrystalline aggregates’, J. Phys D: Appl. Phys., 1982, 15, 2157–2165.
- H. M. Frost: ‘Electromagnetic-ultrasonic transducer: principles, practice and applications’, in ‘Physical Acoustics XIV ’, (ed. W. P. Mason and R. N. Thurston), 179–275; 1979, New York, Academic Press.
- E. R. Dobbs: ‘Electromagnetic generation of ultrasonic waves’, in ‘Physical Acoustics X ’, (ed. W. P. Mason and R. N. Thurston), 127–189; 1975, New York, Academic Press.
- K. Kawashima: ‘Theory and numerical calculations of the acoustic field produced in metal by an electromagnetic ultrasonic transducer’, J. Acoust. Soc. Am., 1976, 60, 1089–1099.
- E. O. Brigham: ‘The fast Fourier transform’; 1974, New York, Prentice-Hall.
- R. J. Roe: ‘Inversion of pole figures for materials having elastic anisotropy’, J. Appl. Phys., 1966, 37, 2069.
- R. B. Thompson, S. S. Lee, J. F. Smith and G. C. Johnson: ‘A comparison of ultrasonic and X-ray determinations of texture in thin Cu and Al plates’, Metall. Trans., 1989, 20A, 243–249.
- Y. C. Liu and G. A. Alers: ‘The anisotropy of Young’s modulus in cold rolled sheets of binary Cu–Zn alloys’, Trans. Metall. Soc. AIME, 1966, 236, 489–495.
- C. A. Stickles and P. R. Mould: ‘The use of Young’s modulus for predicting the plastic-strain ratio of low carbon steel sheets’, Metall. Trans., 1970, 1, 1303–1307.
- G. T. Davies, D. J. Goodwill and R. S. Kallend: ‘Elastic and plastic anisotropy in sheets of cubic metals’, Metall. Trans., 1972, 3, 1677.
- J. L. Rose: ‘Ultrasonic waves in solid media’; 1999, Cambridge, Cambridge University Press.
- Y. Li and R. B. Thompson: ‘Effects of dispersion on the inference of metal texture from S0 plate mode measurements. Part 1: Evaluation of dispersion correction methods’, J. Acoust. Soc. Am., 1992, 91, 1298–1309.
- S. Dixon, C. Edwards and S. B. Palmer: ‘Recent developments using electromagnetic acoustic transducers’, Insight, 2002, 44, 274–278.
- S. Dixon, et al.: ‘High accuracy non-contact ultrasonic thickness gauging of aluminium sheet using electromagnetic acoustic transducers (EMATs)’, Ultrasonics, 2001, 39, 445–453.
- A. Hobbis, A. Aruleswaran, T. W. D. Farley and S. Dixon: ‘Non-contact thickness gauging of aluminium strip using EMAT technology’, Proc. Steel Division Instrumentation Conf., London, UK, 2003, Institute of Materials, section 4.
- S. Dixon, B. Lanyon and G. Rowlands: ‘Ultrasonic resonance in thin two-layer dynamic systems’, submitted for publication 2005.
- I. W. D. Baillie and S. Dixon: ‘Detecting internal and external cracks on continuously cast products through the use of laser generated ultrasound and electromagnetic acoustic transducers’, Proc. Steel Division Instrumentation Conf., London, UK, 2003, Institute of Materials, section 4.