Dissimilar resistance spot welding of DP600 dual phase and AISI 1008 low carbon steels: correlation between weld microstructure and mechanical properties

References

• Kim SJ, Lee CG, Choi I, Lee S: Metall. Mater. Trans. A, 2001, 32A, 505–514.
   Web of Science ®Google Scholar
• Sun X, Choi KS, Soulami A, Liu WN, Khaleel MA: Mater. Sci. Eng. A, 2009, A526, 140–149.
   Web of Science ®Google Scholar
• Pouranvari M, Abedi A, Marashi P, Goodarzi M: Sci. Technol. Weld. Join., 2008, 13, 39–43.
   Web of Science ®Google Scholar
• Sun X, Stephens EV, Khaleel MA: Eng. Fail. Anal., 2008, 15, 356–367.
   Web of Science ®Google Scholar
• Pouranvari M, Asgari HR, Mosavizadeh SM, Marashi PH, Goodarzi M: Sci. Technol. Weld. Join., 2007, 12, 217–225.
   Web of Science ®Google Scholar
• Zuniga S, Sheppard SD: in‘Fatigue and fracture mechanics’(, Piascik R S, et al..), Vol. 27, ASTM STP 1296, 469–489; 1997, Philadelphia, PA, ASTM.
   Google Scholar
• Marya M, Wang K, Hector LG, Gayden X: J. Manuf. Sci. Eng., 2006, 128, 287–298.
   Web of Science ®Google Scholar
• Zuniga SM: ‘Predicting overload pull-out failures in resistance spot welded’, PhD thesis, Stanford University, Menlo Park, CA, USA, 1994.
   Google Scholar
• Lee H, Kim N, Lee TS: Eng. Fract. Mech., 2005, 72, 1203–1221.
   Web of Science ®Google Scholar
• Han Z, Indacochea JE: J. Mater. Eng. Perform., 1993, 2, 437–444.
   Web of Science ®Google Scholar
• Goodarzi M, Marashi SPH, Pouranvari M: J. Mater. Process. Technol., 2008–2009, 209, 4379–4384.
   Web of Science ®Google Scholar
• Pouranvari M, Marashi SPH: ‘Key factors influencing mechanical performance of dual phase steel resistance spot welds’, Sci. Technol. Weld. Join., 2010, 15, 149–155.
   Web of Science ®Google Scholar
• Gould JE, Khurana SP, Li T: ‘Predictions of microstructures when welding automotive advanced high-strength steels’, Weld. J., 2006, 86, 111s–116s.
   Web of Science ®Google Scholar
• Khan MI, Kuntz ML, Zhou Y: Sci. Technol. Weld. Join., 2008, 13, 294–304.
   Web of Science ®Google Scholar
• Gould JE, Peterson W: ‘Advanced materials requires advanced knowledge: understanding resistance spot weld performance on AHSS’, Official Publication of the Fabrication and Manufacturing Association International, Vol. 35, (8), http://www.Fmanet.org
   Google Scholar
• Marya M, Gayden XQ: ‘Development of requirements for resistance spot welding dual-phase (DP600) steels. Part 2: statistical analyses and process maps’, Weld. J., 2005, 84, 197s–204s.
   Web of Science ®Google Scholar
• Ma C, Chen DL, Bhole SD, Boudreau G, Lee A, Biro E: ‘Microstructure and fracture characteristics of spot-welded DP600 steel’, Mater. Sci. Eng. A, 2008, A485, 334–346.
   Web of Science ®Google Scholar
• Joaquin A, Elliott ANA, Jiang C: Weld. J., 2007, 86, 24–27.
   Google Scholar
• Pouranvari M, Marashi P, Goodarzi M, Bahmanpour H: ‘Metallurgical factors affecting failure mode of resistance spot welds’, Proc. Materials Science and Technology 2008 Conf., Pittsburgh, PA, USA, October 2008, AcerS/AIST/ASM/TMS, 2465–2475.
   Google Scholar
• Sun X, Stephens EV, Khaleel MA: Weld. J., 2007, 86, 18s–25s.
   Web of Science ®Google Scholar
• Zhang H, Senkara J: ‘Resistance welding: fundamentals and applications’; 2005, Boca Raton, FL, Taylor & Francis, CRC Press.
   Google Scholar
• Nikoosohbat F, Kheirandish SH, Goodarzi M, Pouranvari M, Marashi SPH: Mater. Sci. Technol., 2010, 26, 738–744.
   Web of Science ®Google Scholar
• Alenius M, Pohjanne P, Somervuori M, Hanninen H: Weld. J., 2006, 85, 305s–313s.
   Web of Science ®Google Scholar
• Marashi P, Pouranvari M, Amirabdollahian S, Abedi A, Goodarzi M: Mater. Sci Eng. A, 2008, A480, 175–180.
   Web of Science ®Google Scholar
• Pouranvari M, Marashi SPH: Mater. Sci. Technol., 2009, 25, 1411–1416.
   Web of Science ®Google Scholar
• Poggio S, Ponte M, Gambaro C, Adamowski J: ‘Resistance spot welding of advanced high strength steel DP600’, Proc. 1st Int. Conf. on ‘Super high strength steels’, Rome, Italy, November 2005, AIM, 1–13.
   Google Scholar
• Daneshpour S, Riekehr S, Kocak M, Gerritsen CHJ: Sci. Technol. Weld. Join., 2009, 14, 20–25.
   Web of Science ®Google Scholar
• Khan MS, Bhole SD, Chen DL, Biro E, Boudreau G, van Deventer J: Sci. Technol. Weld. Join., 2009, 14, 616–625.
   Web of Science ®Google Scholar
• Hernandez VHB, Kuntz ML, Khan MI, Zhou Y: Sci. Technol. Weld. Join., 2008, 13, 769–776.
   Web of Science ®Google Scholar
• ‘Recommended practices for test methods and evaluation the resistance spot welding behaviour of automotive sheet steels’, ANSI/AWS/SAE D8·9–97.
   Google Scholar
• Easterling K: ‘Introduction to the physical metallurgy of welding’, 259; 1983, London, Butterworths.
   Google Scholar
• Lee H, Kim N, Lee TS: Eng. Fract. Mech., 2005, 72, 1203–1221.
   Web of Science ®Google Scholar
• Chuko WL, Gould JE: Weld. J., 2002, 82, 1s–8s.
   Web of Science ®Google Scholar
• Gould JE, Workmann D: ‘Fracture morphologies of resistance spot welds exhibiting hold time sensitivity behaviour’, Proc. 8th Sheet Metal Welding Conf., Miami, FL, USA, October 1998, American Welding Society, Paper 1–1.
   Google Scholar
• Han Z, Indacochea JE: J. Mater. Eng. Perform., 1993, 2, 437–444.
   Web of Science ®Google Scholar
• Rathbun RW, Matlock DK, Speer JG: Weld. J., 2003, 83, 207s–218s.
   Google Scholar