References
- Grässel O, Krüger L, Frommeyer G and Meyer LW: ‘High strength Fe-Mn-(Al,Si) TRIP/TWIP steel development-properties-application’, Int. J. Plast., 2000, 16, 1391–1409.
- Turteltaub S and Suiker ASJ: ‘Transformation-induced plasticity in ferrous alloys’, J. Mech. Phys. Solids, 2005, 53, 1747–1788.
- Gong YF, Kim HS and Cooman BCDE: ‘Internal oxidation during intercritical annealing of CMnSi TRIP steel’, ISIJ Int., 2009, 49, (4), 557–563.
- Meyer MDe, Vanderschueren D and Cooman BCDe: ‘The influence of the substitution of Si by Al on the properties of cold rolled C-Mn-Si TRIP steels’, ISIJ Int., 1999, 39, (8), 813–822.
- Sugimato K, Yu BZ, Mukai Y and Ikeda S: ‘Microstructure and formability of aluminum bearing TRIP-aided steels with annealed martensite martrix’, ISIJ Int., 2005, 45, (8), 1194–1200.
- Wang JY and Chi JH: ‘Research on the flux for continuous casting the steel containing aluminum’, J. Chongqing Univ., 1988, 4, 6–13.
- Wang WL, Blazek K and Cramb A: ‘A study of the crystallization behavior of a new mold flux used in the casting of transformation-induced-plasticity steels’, Metall. Mater. Trans. B, 2008, 39B, 66–74.
- Blazek K, Yin HB, Skoczylas G, McClymonds M and Frazee M: ‘Evaluation of lime-silica and lime-alumina mold powders developed for casting high aluminum TRIP steel grades’; 2011, Düsseldorf, Germany, ECCC-METEC.
- Becker JJ, Madden MA, Natarajan TT, Piccone TJ, Serrano EJ, Story SR, Ecklund-Baker SC, Nickerson JA and Schlichting WK: Proc. Conf. ‘Liquid/solid interactions during continuous casting of high-Al advanced high-strength steels’. AISTech Charlotte, North Carolina 2005, 2, 99–106.
- Street S, James K, Minor N, Roelant A and Tremp J: ‘Production of high-aluminum steel slabs’, Iron Steel Tech., 2008, 5, (7), 38–49.
- Yu X, Wen GH, Tang P and Wang H: ‘Effect of B2O3 on the physical properties of mold slag used for high-Al steel’, J. Chongqing Univ., 2011, 34, (1), 66–71.
- Wang H, Tang P, H Wen G and Yu X: ‘Effect of Na2O on crystallisation behaviour and heat transfer of high Al steel mould fluxes’. Ironmaking Steelmaking, 2011, 38, (5), 369–373.
- Yu X: ‘Fundamental research on the mould slags used for high-Al steels’, PhD thesis, College of Materials Science and Engineering of Chongqing University, Chongqing, China, 2011.
- Wen GH, Sridhar S, Tang P, Qi X and Liu YQ: ‘Development of fluoride-free mold powders for peritectic steel slab casting’, ISIJ Int., 2007, 47, (8), 1117–1125.
- Ba JT, Wen GH, Tang P, Zhao YH, Chi JH, Zhi JJ and Xu GD: ‘Mold fluxes of peritectic steel for wide and thick slabs’, J. Univ. Sci. Technol. Beijing, 2009, 31, (6), 696–700.
- Mills KC: ‘Mould powders for continuous casting’, 8; 2003, London, Department of Materials, Imperial College.
- Feng XJ: ‘Effect of heat treatment on aluminate salt cement mineral stucture’, J. Chin. Ceram. Soc., 1962, 1, (3), 135–141.
- Liu LL, Zhai YC, Tian YW, Wang YJ and Han YX: ‘Property study of hexagonal calcium aluminate hydrate’. Light Metal, 2003, 3, 19–21.
- Blazek K, Yin HB, Skoczylas G, McClymonds M and Frazee M: Proc. Conf. ‘Development and evaluation of lime-alumina based mould powders for casting high aluminum TRIP steel grades’; 2011, Indianapolis, AISTech 2011.
- Huang XH: ‘Ferrous metallurgical principle’, 3rd edn., 242; 2002, Beijing, Metallurgical Industry Press.