Effect of isothermal bainitic processing on microstructures and mechanical properties of novel Mo and Nb microalloyed TRIP steel

References

• Grajcar A, Kuziak R and Zalecki W: ‘Third generation of AHSS with increased fraction of retained austenite for the automotive industry’, Arch. Civil Mech. Eng., 2012, 2, 334–341.
   Google Scholar
• Zhu R, Li S, Karaman I, Arroyave R, Niendorf T and Maier HJ: ‘Multi-phase microstructure design of a low-alloy TRIP-assisted steel through a combined computational and experimental methodology’, Acta Mater., 2012, 60, 3022–3033.
   Web of Science ®Google Scholar
• Kuziak R, Kawalla R and Waengler S: ‘Advanced high strength steels for automotive industry: a review in Archives of Civil and Mechanical Engineering’, Arch. Civil Mech. Eng., 2008, 8, (2), 103–117.
   Web of Science ®Google Scholar
• Zhu R, Li S, Song M, Karaman I and Arroyave R: ‘Phase constitution effect on the ductility of low alloy multiphase transformation induced plasticity steels’, Mater. Sci. Eng. A, 2013, A569, 137–143.
   Web of Science ®Google Scholar
• Bhattacharyya T, Singh SB, Dasa S, Haldara A and Bhattacharjeea D: ‘Development and characterisation of C–Mn–Al–Si–Nb TRIP aided steel’, Mater. Sci. Eng. A, 2011, A528, 2394–2400.
   Google Scholar
• Zhang Z, Manabe K, Li Y and Zhu FX: ‘Effect of isothermal bainite treatment on microstructure and mechanical properties of low-carbon TRIP seamless steel tube’, Steel Res. Int., 2012, 83, 645–652.
   Web of Science ®Google Scholar
• Kammouni A, Saikaly W, Dumont M, Marteau C, Bano X and Charai A: ‘Effect of the bainitic transformation temperature on retained austenite fraction and stability in Ti microalloyed TRIP steels’, Mater. Sci. Eng. A, 2009, A518, 89–96.
   Web of Science ®Google Scholar
• Wang Y, Zhang K, Guo ZH, Chen N and Rong YH: ‘A new effect of retained austenite on ductility enhancement in high strength bainitic steel’, Mater. Sci. Eng. A, 2012, A552, 288–294.
   Google Scholar
• Mahieu J, Maki J, de Cooman BC and Claessens S: ‘Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel, Metall. Mater. Trans. A, 2002, 33A, 2537–2580.
   Google Scholar
• Kim SJ, Lee CG, Lee TH and Oh CS: ‘Effect of Cu, Cr and Ni on mechanical properties of 0·15 wt.% C TRIP-aided cold rolled steels’, Scr. Mater., 2003, 48, 539–544.
   Web of Science ®Google Scholar
• Pereloma EV, Timokhina IB, Russell KF and Mille MK: ‘Characterization of clusters and ultrafine precipitates in Nb-containing C–Mn–Si steels’, Scr. Mater., 2006, 54, 471–476.
   Web of Science ®Google Scholar
• Nagayama K, Terasaki T, Tanaka K, D Fischer F, Antretter T, Cailletaud G and Azzouz F: ‘Mechanical properties of a Cr–Ni–Mo–Al–Ti maraging steel in the process of martensitic transformation’, Mater. Sci. Eng. A, 2001, A308, 25–37.
   Google Scholar
• Shi W, Li L, Yang CX, Fu RY, Wang L and Wollants P: ‘Strain-induced transformation of retained austenite in low-carbon low-silicon TRIP steel containing aluminum and vanadium’, Mater. Sci. Eng. A, 2006, A429, 247–251.
   Google Scholar
• Scott C, Maugis P, Barges P and Goune M: ‘Microalloying with vanadium in TRIP steels’, Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, Winter Park, CO, USA, June 2004, AIST, 181–193.
   Google Scholar
• Hashimoto S, Ikeda S, Sugimoto KI and Miyake S: ‘Effects of Nb and Mo addition to 0·2%C–1·5%Si–1·5%Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets’, ISIJ Int., 2004, 44, 1590–1598.
   Web of Science ®Google Scholar
• Mintz B: ‘Hot dip galvanising of transformation induced plasticity and other intercritically annealed steels’, Int. Mater. Rev., 2001, 46, 169–197.
   Web of Science ®Google Scholar
• Tsukatani I, Hashimoto S and Inoue T: ‘Effect of silicon and manganese addition on mechanical properties of high-strength hot rolled sheet steel containing retained austenite’, ISIJ Int., 1991, 31, (9), 992–1000.
   Web of Science ®Google Scholar
• Sugimoto K, Murata M, Muramatsu T and Mukai Y: ‘Formability of C–Si–Mn–Al–Nb–Mo ultra high-strength TRIP-aided steels’, ISIJ Int., 2007, 47, (9), 1357–1362.
   Web of Science ®Google Scholar
• Li Z and Wu D: ‘Effects of hot deformation and subsequent austempering on the mechanical properties of Si–Mn TRIP steels’, ISIJ Int., 2006, 46, (1), 121–128.
   Web of Science ®Google Scholar
• Dyson DJ and Holmes B: ‘Effect of alloying additions on the lattice parameter austenite’, Iron Steel Inst., 1970, 208, 469–474.
   Web of Science ®Google Scholar
• Sundman B, Jansson B and Andersson JO: ‘The Thermo-Calc databank system’, Calphad, 1985, 9, 153–190.
   Web of Science ®Google Scholar
• Caballero FG, Miller MK, Babu SS and Garcia-Mateo C: ‘Atomic scale observations of bainite transformation in a high carbon high silicon steel’, Acta Mater., 2007, 55, 381–390.
   Web of Science ®Google Scholar
• Mukherjee M, Singh SB and Mohanty ON: ‘Microstructural characterization of TRIP-aided steels’, Mater. Sci. Eng. A, 2008, A486, (1–2), 32–37.
   Google Scholar
• Yoo JY., Choo WY, Park TW and Kim YW: ‘Microstructures and age hardening characteristics of direct quenched Cu bearing HSLA steel’, ISIJ Int., 1995, 35, 1034–1040.
   Web of Science ®Google Scholar
• Wada T, Wada H, Elliot JF and Chipman J: ‘Activity of carbon and solubility of carbides in the FCC Fe–Mo–C, Fe–Cr–C, and Fe–V–C alloys’, Metall. Trans., 1972, 3, 2865–2872.
   Web of Science ®Google Scholar
• Hashimoto S, Ikeda S, Sugimoto K and Miyake S: ‘Effects of Nb and Mo addition on the mechanical properties of hot rolled TRIP-aided steel sheets’, Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, Winter Park, CO, USA, June 2004, AIST, 195–203.
   Google Scholar
• Wang XD, Huang BX, Wang L and Rong YH: ‘Microstructure and mechanical properties of microalloyed high-strength transformation-induced plasticity steels’, Metall. Mater. Trans. A, 2008, 39A, 1–7.
   Web of Science ®Google Scholar
• Das S, Timokhina I, Singh SB, Pereloma E and Mohanty ON: ‘Effect of bainitic transformation on bake hardening in TRIP assisted steel’, Mater. Sci. Eng. A, 2012, A534, 485–494.
   Google Scholar
• Itami A, Takahashi M and Ushioda K.: ‘Plastic stability of retained austenite in the cold-rolled 0·14% C–1·9% Si–1·7% Mn sheet steel’, ISIJ Int., 1995, 35, (9), 1121–1127.
   Web of Science ®Google Scholar
• De Moor E, Lacroix S, Clarke AJ, Penning J and Speer JG: ‘Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels’, Metall. Mater. Trans. A, 2008, 39A, 2586–2595.
   Web of Science ®Google Scholar
• Jing CN, Suh DW, Oh CS, Wang ZC and Kim SJ: ‘Effects of phosphorous addition on mechanical properties and retained austenite stability of 0·15C–1·5Mn–1·5Al TRIP-aided cold rolled steels’, Met. Mater. Int., 2007, 13, (1), 13–19.
   Web of Science ®Google Scholar
• Wang J and Vanderzwaag S: ‘Stabilization mechanisms of retained austenite in transformation-induced plasticity steel’, Metall. Mater. Trans. A, 2001, 32A, (6), 1527–1539.
   Web of Science ®Google Scholar
• de Cooman BC: ‘Structure–properties relationship in TRIP steels containing carbide-free bainite’, Curr. Opin. Solid State Mater. Sci., 2004, 8, (3/4), 285–303.
   Web of Science ®Google Scholar
• Takahashi M and Bhadeshia HKDH: ‘A model for the microstructure of some advanced bainitic steels’, Metall. Trans., 1991, 32, 689–696.
   Google Scholar
• Ghosh G and Olson GB: ‘Simulation of paraequilibrium growth in multicomponent systems’, Metall. Mater. Trans. A, 2001, 32A, 455–467.
   Web of Science ®Google Scholar
• Kimura Y and Takaki S: ‘Phase transformation mechanism of Fe–Cu alloys’, ISIJ Int., 1997, 37, (3), 290–295.
   Web of Science ®Google Scholar