References
- Gao H.-S: ‘Technology development of high-quality steel production’, 1–4; 2013, Beijing, China, World Metal Herald.
- Fukuda Y, Onoyama S and Imai T: ‘Development of high grade steel manufacturing technology on mass-production at Nagoya works ’, Nipp. Steel Techn. Rep., 2012, 394, 91–96.
- Sumita N, Oguchi Y, Fujii T, Emi T and Ueda A: ‘Performance of ladle refining of BOF melt by a 250 t pulsating mixing process’, Kawasaki Steel Techn. Rep., 1985, 17, 50–59.
- Liu B.-S, Zhu G.-S and Li H.-X: ‘Decarburization rate of RH refining for ultra low carbon steel’, International Journal of Minerals, Metallurgy and Materials, 2010, 17, 22–26.
- Guo D and Irons GA: ‘Modeling of gas-liquid reactions in ladle metallurgy: Part I. Physical modeling’, Metall. Mater. Trans. B, 2000, 31B, 1447–1455.
- Seshadri V, da Silva CA, da Silva IA and Vargas GA: ‘Decarburisation rates in RH–KTB degasser of CST steel plant through physical modeling study’, Ironmak. Steelmak., 2006, 33, 34–38.
- Jiang F and Cheng GG: ‘Effect of gas with multihole orifice in upleg snorkel on bubble behavior and decarburization rate during RH refining’, Ironmak. Steelmak., 2012, 39, 386–390.
- Kitamura T, Miyamoto K, Tsujno R, Mizoguch S and Kato K: ‘Mathematical reaction model for nitrogen in vacuum degasser desorption and decarburization’, ISIJ Int., 1996, 36, 395–401.
- Neves L, Passos H, de Oliveria O and Tavares RP: ‘Evaluation of the effects of gas in the vacuum chamber of a RH degasser on melt circulation and decarburization rates’, ISIJ Int., 2009, 49, 1141–1149.
- Kitamura S.-Y, Aoki H, Miyamoto K and Furuta H: ‘Development of a novel degassing process consisting with single large immersion snorkel and a bottom bubbling ladle’, ISIJ Int., 2000, 40, 455–459.
- Maruoka N, Lazuardi F and Nogami H: ‘Effect of bottom bubbling conditions on surface reaction rate in oxygen–water system’, ISIJ Int., 2010, 50, 89–94.
- Huang X.-H: ‘Metallurgical principle’, 361–363; 2002, Beijing, Metallurgical Industry Press.
- Higuchi Y, Ikenaga H and Shirota Y: ‘Effects of [C], [O] and pressure on RH vacuum decarburization’, Tetsu-to-Hagané, 1998, 84, 709–714.
- van Ende M.-A, Kim Y.-M and Cho M.-K: ‘A kinetic model for the ruhrstahl heraeus (RH) degassing process’, Metall. Mater. Trans. B, 2011, 42B, 477–489.
- Park Y.-G and Yi K.-W: ‘A new numerical model for predicting carbon concentration during RH degassing treatment’, ISIJ Int., 2003, 43, 1403–1409.
- Sumida N, Fujii T and Oguchi Y: ‘Production of ultra low carbon steel by combined process of bottom blown converter and degasser’, Kawasaki Steel Techn. Rep., 1983, 15, 152–157.
- Hiroshi T: ‘The development of the RH treatment using a prevacuum equipment’, Curr. Adv. Mater. Process., 1995, 8, 998.
- Sano M, Han Y and Kato M: ‘Decarburization reaction of molten iron of low carbon concentration with vacuum suction degassing method’, ISIJ Int., 1994, 34, 657–662.