References
- Depree N, Sneyd J, Taylor S, Taylor M, Chen J, Wang S and O’Connor M: ‘Development and validation of models for annealing furnace control from heat transfer fundamentals’, Comput. Chem. Eng., 2010, 34, 1849–1853.
- Carvalho S, Ong T and Guimarães G: ‘A mathematical and computational model of furnaces for continuous steel strip processing’, J. Mater. Process. Technol., 2006, 178, 379–387.
- Wan F, Wang Y and Qin S: ‘Modeling of strip heating process in vertical continuous annealing furnace’, J. Iron. and Steel Res Int., 2012, 19, (5), 29–36.
- Niederer M, Strommer S, Steinboec A and Kugi A: ‘A simple control-oriented model of an indirect-fired strip annealing furnace’, Int. J. Heat Mass Transfer, 2014, 78, 557–570.
- Lewis DL, Sandoz DJ, Norberg PO and Warwick K: ‘The application of predictive control of steel annealing’, Proc. Conf. CONTROL’94, 1994, Institution of Electrical Engineers, Conference Publication No. 389, 692–698.
- Morari M and Lee JH: ‘Model predictive control: past, present and future’, Comput. Chem. Eng., 1999, 23, 667–682.
- Kelly CD, Watanapongse D and Gaskey KM: ‘Application of modern control to a continuous anneal line’, IEEE Control Syst. Mag., 1988, 32–37.
- Toshitani N and Hasegawa A: ‘Model-based control of strip temperature for the heating furnace in continuous annealing’, IEEE Trans. Control Syst. Technol., 1998, 6, (2), 146–156.
- Bitschnau L, Jakubek S and Kozek M: ‘Constrained model predictive control of a continuous annealing furnace’, Proc. ASME Conf. on ‘Dynamic systems and control’, MA, USA, 2010, ASME Dynamic Systems and Control Division, 285–292.
- Bitschnau L, Kozek M, Jakubek S and Leeber F: ‘Implementation of model predictive control in an industrial continuous annealing furnace’, Proc. IASTED Int. Conf. on ‘Control and applications’, Vancouver, Canada, 2011, ACTA Press, 177–184.
- Åström KJ and Wittenmark B: ‘Computer-controlled systems: theory and design’, 2nd edn, Chap. 8, 210–212; 1990, USA, Prentice-Hall International.
- Chapra SC and Canale RP: ‘Numerical methods for engineers’, 2nd edn; 1988, USA, McGraw-Hill.
- Gray WA and Mueller R: ‘Engineering calculations in radiative heat transfer’, 1st edn; 1974, UK, Pergamon Press.
- Howell JR: ‘A catalog of radiation heat transfer configuration factors’; 1982, USA, McGraw-Hill.
- Hottel HC and Sarofim AF: ‘Radiative transfer’; 1967, USA, McGraw-Hill.
- Verein Deutscher Ingenieure (eds.): ‘VDI heat atlas’, 2nd edn; 2010, Germany, Springer.
- Roffel B and Betlem B: ‘Process dynamics and control: modeling for control and prediction’; 2006, UK, Wiley.
- Wright SJ: ‘Applying new optimization algorithms to model predictive control’, Proc. 5th Int. Conf. on ‘Chemical process control’, CA, USA, 1997, AIChE, Symposium Series No.316, 147–155.
- Cartis C: ‘Some disadvantages of a Mehrotra-type primal-dual corrector interior point algorithm for linear programming’, Technical Report 04/27, Oxford University Computing Laboratory, Oxford, UK, 2005.
- Kendall JW: ‘Hard and soft constraints in linear programming’, Omega, 1975, 3, (6), 709–715.
- Sasaki T, Hira T and Abe H: ‘Control of strip buckling and snaking in continuous annealing furnace’, Kawasaki Steel Giho, 1984, 16, 37–45.
- Luo H, Dunbar WS and Moore JE: ‘Steel strip in a continuous annealing furnace’, Manuf. Sci. Eng., 1999, 121, (1), 76–83.