Effect of strain rate and temperature on hot workability and flow behaviour of duplex stainless steel

References

• C. R. Xavier, M. F. Campos and J. A. Castro: ‘Numerical method applied to duplex stainless steel welding.’, Ironmaking Steelmaking, 2013, 40, (6), 420–429. doi: 10.1179/1743281212Y.0000000065
   Web of Science ®Google Scholar
• S. Mostafaee, M. Andersson and P. G. Jonsson: ‘Petrographical study of microstructural evolution of EAF duplex stainless steelmaking slags.’, Ironmaking Steelmaking, 2011, 38, (2), 90–100. doi: 10.1179/030192310X12731438631769
   Web of Science ®Google Scholar
• J. M. Cabrera, A. Mateo, L. Lanes, J. M. Prado and M. Anglada: ‘Hot deformation of duplex stainless steels’, Mater. Process. Technol., 2003, 143-144, 321–325. doi: 10.1016/S0924-0136(03)00434-5
   Web of Science ®Google Scholar
• E. Evangelista, H. J. McQueen, M. Niewczas and M. Cabibbo: ‘Hot workability of 2304 and2205 duplex stainless steels’, Can. Metall. Q., 2004, 43, (3), 339–353. doi: 10.1179/cmq.2004.43.3.339
   Web of Science ®Google Scholar
• L. Chen, X. C. Ma, X. Liu and L. M. Wang: ‘Processing map for hot working characteristics of a wrought 2205 duplex stainless steel’, Mater. Des., 2011, 32, (3), 1292–1297. doi: 10.1016/j.matdes.2010.09.030
   Web of Science ®Google Scholar
• A. Dehghan-Manshadi and P. D. Hodgson: ‘Effect of δ-ferrite co-existence on hot deformation and recrystallization of austenite’, J. Mater. Sci., 2008, 43, (18), 6272–6277. doi: 10.1007/s10853-008-2907-4
   Web of Science ®Google Scholar
• B. Ahlblom and R. Sandstrom: ‘Hot Workability of Stainless Steels: Influence of Deformation Parameters, Microstructural Components, and Restoration Processes’, Int. Met. Rev., 1982, 27, 1–27. doi: 10.1179/imr.1982.27.1.1
   Google Scholar
• N. D. Ryan and H. J. McQueen: ‘Flow stress, dynamic restoration, strain hardening and ductility in hot working of 316 steel’, J. Mater. Process. Technol., 1990, 21, (2), 177–199. doi: 10.1016/0924-0136(90)90005-F
   Web of Science ®Google Scholar
• A. Iza-Mendia, A. Pinol-Juez, J. J. Urcola and I. Gutierrez: ‘Microstructural and mechanical behavior of a duplex stainless steel under hot working conditions’, Metall. Mater. Trans. A, 1998, 29A, (12), 2975–2986. doi: 10.1007/s11661-998-0205-z
   Web of Science ®Google Scholar
• Y. Y. Liu, H. T. Yan, X. H. Wang and M. Yan: ‘Effect of hot deformation mode on the microstructure evolution of lean duplex stainless steel 2101’, Mater. Sci. Eng. A, 2013, A575, (15), 41–47. doi: 10.1016/j.msea.2013.03.036
   Web of Science ®Google Scholar
• G. W. Fan, J. Liu, P. D. Han and G. J. Qiao: ‘Hot ductility and microstructure in casted 2205 duplex stainless steels’, Mater. Sci. Eng. A, 2009, A515, (1-2), 108–112. doi: 10.1016/j.msea.2009.02.022
   Web of Science ®Google Scholar
• Y. Wang, Q. L. Pan, Y. F. Song, C. Li and Z. Li: ‘Hot Deformation and Processing Maps of X-750 Nickel-Based Superalloy’, Mater. Des., 2013, 51, 154–160. doi: 10.1016/j.matdes.2013.03.081
   Web of Science ®Google Scholar
• Y. H. Liu, Y. Q. Ning, Z. K. Yao, H. Z. Guo and Y. J. Nan: ‘Effect of true strains on processing map for isothermal compression of Ni-20.0Cr-2.5Ti-1.5Nb-1.0Al Ni-base superalloy’, J. Alloys Compd, 2014, 612, (5), 56–63. doi: 10.1016/j.jallcom.2014.05.165
   Web of Science ®Google Scholar
• C. Zener and J. H. Hollomon: ‘Effect of Strain Rate Upon Plastic Flow of Steel’, J. Appl. Phys., 1944, 15, 22–27. doi: 10.1063/1.1707363
   Google Scholar
• A. R. Salehi and A. Karimi Taher: ‘Flow behaviour and microstructural evolution of 53Fe–26Ni–15Cr superalloy during hot compression test.’, Ironmaking Steelmaking, 2007, 34, (2), 151–156. doi: 10.1179/174328107X155213
   Web of Science ®Google Scholar
• Y. H. Yang and B. Yan: ‘The microstructure and flow behavior of 2205 duplex stainless steels during high temperature compression deformation’, Mater. Sci. Eng. A, 2013, A579, (1), 194–201. doi: 10.1016/j.msea.2013.05.020
   Web of Science ®Google Scholar
• S. V. Mehtonen, L. P. Karjalainen and D. A. Porter: ‘Modeling of the high temperature flow behavior of stabilized 12-27 wt% Cr ferritic stainless steels’, Mater. Sci. Eng. A, 2014, A607, 44–52. doi: 10.1016/j.msea.2014.03.124
   Web of Science ®Google Scholar
• Y. Han, H. Wu, W. Zhang, D. Zou, G. Liu and G. Qiao: ‘Constitutive equation and dynamic recrystallization behavior of as-cast 254SMO super-austenitic stainless steel’, Mater. Des., 2015, 69, 230–240. doi: 10.1016/j.matdes.2014.12.049
   Web of Science ®Google Scholar
• Y. Han, G. Qiao, J. Sun and D. Zou: ‘A comparative study on constitutive relationship of as-cast 904L austenitic stainless steel during hot deformation based on Arrhenius-type and artificial neural network models’, Comput. Mater. Sci., 2013, 67, 93–103. doi: 10.1016/j.commatsci.2012.07.028
   Web of Science ®Google Scholar
• A. Belyakov, R. Kaibyshev and R. Zaripova: ‘High-Temperature Mechanism of Dynamic Recrystallization of Ferritic Steel’, Mater. Sci. Forum, 1993, 113-l15, (5), 385–390. doi: 10.4028/www.scientific.net/MSF.113-115.385
   Google Scholar
• P. Cizek and B. P. Wynne: ‘A mechanism of ferrite softening in a duplex stainless steel deformed in hot torsion’, Mater. Sci. Eng. A, 1997, A230, 88–94. doi: 10.1016/S0921-5093(97)00087-7
   Web of Science ®Google Scholar
• B. Eghbali, A. Abdollah-Zadeh, H. Beladi and P. D. Hodgson: ‘Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel’, Mater. Sci. Eng. A, 2006, A435-A436, (5), 499–503. doi: 10.1016/j.msea.2006.07.026
   Web of Science ®Google Scholar
• J. L. Wan, X. J. Sun, J. L. Gu and N. P. Chen: ‘Research on continuous dynamic recrystallization in hot torsion of Al-Cu-Mg-Zn-Cr alloy’, Acta Metall. Sin., 1999, 35, 1031–1035.
   Google Scholar
• V. Y. Gertsman and K. Tangri: ‘A study of grain boundary statistics in 304 and 316L stainless steels.’, Philos. Mag. A, 1991, 64A, 1319–1326. doi: 10.1080/01418619108225351
   Google Scholar
• M. Martins and L. C. Casteletti: ‘Heat treatment temperature influence on ASTM A890 GR 6A super duplex stainless steel microstructure.’, Mater. Charact., 2005, 55, (3), 225–233. doi: 10.1016/j.matchar.2005.05.008
   Web of Science ®Google Scholar
• H. Hallberg, B. Svendsen, T. Kayser and M. Ristinmaa: ‘Microstructure evolution during dynamic discontinuous recrystallization in particle-containing Cu’, Comput. Mater. Sci., 2014, 84, 327–338. doi: 10.1016/j.commatsci.2013.12.021
   Web of Science ®Google Scholar
• D. G. Cram, X. Y. Fang, H. S. Zurob, Y. J. M. Brechet and C. R. Hutchinson: ‘The effect of solute on discontinuous dynamic recrystallization’, Acta Mater., 2012, 60, (18), 6390–6404. doi: 10.1016/j.actamat.2012.08.021
   Web of Science ®Google Scholar
• P. Zhang, C. Hu, C. G. Ding, Q. Zhu and H. Y. Qin: ‘Plastic deformation behavior and processing maps of a Ni-based superalloy’, Mater. Des., 2015, 65, 575–584. doi: 10.1016/j.matdes.2014.09.062
   Web of Science ®Google Scholar
• Y. Prasad, H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan and K. A. Lark: ‘Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242’, Metall. Mater. Trans. A, 1984, 15A, (10), 1883–1892. doi: 10.1007/BF02664902
   Web of Science ®Google Scholar
• Y. L. Fang, Z. Y. Liu and G. D. Wang: ‘Crack Properties of Lean Duplex Stainless Steel 2101 in Hot Forming Processes’, J. Iron Steel Res. Int., 2011, 18, (4), 58–62. doi: 10.1016/S1006-706X(11)60051-4
   Web of Science ®Google Scholar
• H. Jiang, J. Dong, M. Zhang, L. Zheng and Z. Yao: ‘Hot deformation characteristics of Alloy 617B nickel-based superalloy: A study using processing map’, J. Alloys Compd, 2015, 647, 338–350. doi: 10.1016/j.jallcom.2015.05.192
   Web of Science ®Google Scholar