References
- K. Spencer, M. Véron, K. Yu-Zhang and J. D. Embury: Mater. Sci. Technol., 2009, 25, 7–17.
- R. Lagneborg: Acta Metall., 1964, 12, 823–843.
- D. T. Llewellyn and J. D. Murray: Proc. Joint Conf. on ‘High-alloy steels’, 197-212; 1964, London, The Iron and Steel Institute.
- P. L. Mangonon and G. Thomas: Metall. Trans., 1970, 1, 1577–1586
- P. L. Mangonon and G. Thomas: Metall. Trans., 1970, 1, 1587–1594.
- R. P. Reed: Acta Metall., 1962, 10, 865–877.
- R. P. Reed and C. J. Guntner: Trans. AIMME, 1964, 230, 1713–1720.
- S. S. Hecker, M. G. Stout, K. P. Staudhammer and J. L. Smith: Metall Trans. A, 1982, 13A, 619.
- S. F. Peterson, M. C. Mataya and D. K. Matlock: J. Met., 1997, 49, 54.
- V. Talyan, R. H. Wagoner and J. K. Lee: Metall Mater. Trans. A, 1998, 29A, 2161–2172.
- S. Mishra, K. Narasimhan and I. Samajdar: Mater. Sci. Technol., 2007, 23, 1118–1126.
- E. Orowan: Proc. Symp. on ‘Internal stresses and fatigue in metals’, (ed.G. M. Rassweiler and W. L. Grube), 59–80; 1959, Amsterdam, Elsevier.
- Z. Mroz: J. Mech. Phys. Solids, 1967, 15, 163–175.
- R. Sowerby, D. K. Uko and Y. Tomita: Mater. Sci. Eng., 1979, 41, 43–58.
- S. F. Corbin and D. S. Wilkinson: Acta Metall., 1994, 42, 1319–1327.
- M. A. Gharghouri, G. C. Weatherly, J. D. Embury and J. Root: Philos. Mag. A, 1999, 79A, 1671–1695.
- B. Clausen: ‘Characterisation of polycrystal deformation by numerical modelling and neutron diffraction measurements, Riso-R-985(EN)’, PhD thesis, Riso National Laboratory, Roskilde, Denmark, 1997.
- B. Clausen, T. Lorentzen, M. A. M. Bourke and M. R. Daymond: Mater. Sci. Eng. A, 1999, A259, 17–24.
- B. Clausen, T. Lorentzen and T. Leffers: Acta Mater., 1998, 46, 3087–3098.
- K. Spencer: ‘The work hardening of austenitic stainless steels, applied to the fabrication of high-strength conductors’, PhD thesis, McMaster University, Hamilton, Canada, 2004.
- M. Barral, J. L. Lebrun, J. M. Sprauel and G. Maeder: Metall. Trans. A, 1987, 18A, 1229–1239.
- H. Behnken: Mater. Sci. Forum, 2000, 347, 273–278.
- E. Kroner: Acta Metall., 1961, 9, 155.
- H. Mecking and U. F. Kocks: Acta Metall., 1981, 29, 1865–1875.
- U. F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, 48, 102.
- P. W. Bridgeman: ‘Studies in large plastic flow and fracture’; 1952, New York, McGraw-Hill.
- A. Kelly and N. H. MacMillan: ‘Strong solids’, 3rd edn; 1986, New York, Clarendon Press.
- J. D. Atkinson, L. M. Brown and W. M. Stobbs: Philos. Mag., 1974, 30, 1247–1280.
- R. L. Tobler: in ‘Austenitic steels at low temperatures’, (ed. R. P. Reed and T. Horiuchi), 135-157; 1983, New York, Plenum Press.
- G. Masing: Wissensch. Veroffentl. Siemens-Konzern, 1923, 3, 231–239.
- R. J. Asaro: Acta Metall., 1975, 23, 1255–1265.
- L. M. Brown: Acta Metall., 1973, 21, 879–885.
- J. D. Eshelby: Proc. Roy. Soc. Lond A, 1957, 241A, 376–396.
- G. Le Roy, J. D. Embury, G. Edward and M. F. Ashby: Acta Metall., 1981, 29, 1509–1522.
- J. D. Embury and R. M. Fisher: Acta Metall., 1966, 14, 147–159.
- R. L. Lyles and H. G. F. Wilsdorf: Acta Metall., 1975, 23, 269–277.
- G. R. Odette, G. E. Lucas, R. Maiti and J. W. Sheckherd: J. Nucl. Mater., 1983, 122, 442–447.
- J. F. Knott: ‘Fundamentals of fracture mechanics’; 1973, London, Butterworths.