Advanced search
Publication Cover
Materials Science and Technology Volume 26, 2010 - Issue 6: Applications of electron backscatter diffraction
Journal homepage
284
Views
60
CrossRef citations to date
0
Altmetric
Articles

Microstructure and failure behaviour of resistance spot welded DP980 dual phase steel

F. NikoosohbatMaterials Science and Metallurgical Engineering Department, Iran University of Science and Technology (IUST), Tehran, Iran
,
S. KheirandishMaterials Science and Metallurgical Engineering Department, Iran University of Science and Technology (IUST), Tehran, Iran
,
M. GoodarziMaterials Science and Metallurgical Engineering Department, Iran University of Science and Technology (IUST), Tehran, Iran;, Email: [email protected]
,
M. PouranvariMaterials and Metallurgical DepartmentSchool of Engineering, Islamic Azad University, Dezful Branch, Dezful, Iran
&
S. P. H. MarashiMining and Metallurgical Engineering DepartmentAmirkabir University of Technology, Tehran, Iran
Pages 738-744 | Published online: 19 Jul 2013

References

  • S. J. Kim, C.G. Lee, I. Choi and S. Lee: Metall. Mater. Trans. A, 2001, 32A, 505–514.
  • M. D. Tumuluru: Weld 1, 2007, 86, 31–37.
  • P. Marashi, M. Pouranvari, S. Amirabdollahian, A. Abedi and M. Goodarzi: Mater. Sci. Eng. A, 2008, A480, 175–180.
  • M. Marya and X. Q. Gayden: Weld 1, 2005, 84, 172s-182s.
  • X. Sun, E. V. Stephens and M. A. Khaleel: Eng. Fail. Anal, 2008, 15, 356–367.
  • P. Marashi, M. Pouranvari, S. M. H. Sanaee, A. Abedi, H. Abootalebi and M. Goodarzi: Mater. Sci. Technol, 2008, 24, 1506–1512.
  • M. Marya and X. Q. Gayden: Weld J., 2005,84, 197s-204s.
  • M. I. Khan, M. L. Kuntz, P. Su, A. Gerlich, T. North and Y. Thou: Sci. Technol. Weld. Join., 2007, 12, 175–182.
  • C. Ma, S. D. Bhole, D. L. Chen, A. Lee, E. Biro and G. Boudreau: Set Technol. Weld. Join., 2006, 11, 480–487.
  • C. Ma, D. L. Chen, S. D. Bhole, G. Boudreau, A. Lee and E. Biro: Mater. Sci. Eng. A, 2008, A485, 334-346
  • E. Pakalnins and T. Morrisette: Proc. 11th Int. Conf. on ‘Sheet metal welding’, Livonia, MI, USA, May 2004, American Welding Society.
  • ‘Recommended practices for test methods for evaluating the resistance spot welding behavior of automotive sheet steels’, ANSI/AWS/SAE D 8.9-97, American Welding Society, Miami, FL, USA, 1997.
  • M. V. Li, D. Dong and M. Kimchi: ‘Modeling and analysis of microstructure development in resistance spot welds of high strength steels’, SAE technical paper no. 982278, SAE International, Warrendale, PA, USA, 1998.
  • M.Volger: ‘Investigation of resistance spot weld fomation’, PhD thesis, Stanford University, Palo Alto, CA, USA, 1993.
  • J. E. Gould, S. P. Khurana and T. Li: Weld J., 2006,86, 111s-116s.
  • J. E. Gould and D. Workman: Proc. 8th Conf. on ‘Sheet metal welding’, Detroit, MI, USA, May 1998, American Welding Society.
  • A. Joaquin, A. Elliott and C. Jiang: Proc. 12th Conf. on ‘Sheet metal welding’, Detroit, MI, USA, May 2006, American Welding Society, Paper 1–2.
  • M. Marya, K. Wang, L. G. Hector and X. Gayden: J. Manuf Set Eng., 2006, 128, 287–298.
  • Z. Han and J. E. Indacochea: J. Mater. Eng. Perform., 1993, 2, 437–444.
  • M. Goodarzi, S. P. H. Marashi and M. Pouranvari: J. Mater. Process. Technol, 2008, in press.
  • H. Zhang: Weld 1, 1999, 78, 373s-380s.
  • M. Pouranvari, A. Abedi, P. Marashi and M. Goodarzi: Set Technol. Weld. Join., 2008, 13, 39–43.
  • M. Pouranvari, H. R. Asgari, S. M. Mosavizadeh, P. H. Marashi and M. Goodarzi: Set Technol. Weld Join., 2007, 12, 217–225.
  • M. Pouranvari, P. Marashi, M. Goodarzi and H. Bahmanpour: Proc. Conf. on ‘Materials science and technology 2008’, Pittsburgh, PA, USA, October 2008, AIST, 2465-2475
  • X. Sun, E. V. Stephens and M. A. Khaleel: Weld. 1, 2007,86, 18s-25s.
  • Y. J. Chao: Sci. Technol. Weld. Join., 2003, 8,133–137.
  • M. Zhou, H. Zhang and S. J. Hu: Weld. J., 2003, 82, 72-77s.
  • M. Zhou, H. Zhang and S. J. Hu: Weld J., 1999, 78, 305s-313s.
  • H. Zhang, M. Zhou and S. J. Hu: J. Eng. Manuf, 2001, 215, (3), 403-414(12).
  • S. Zhang: Int. J. Fract., 1997, 88, 167–185.
  • H. Zhang and J. Senkara: ‘Resistance welding: fundamentals and applications’; 2005, Boca Raton, FL, Taylor & Francis/CRC press.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.