References
- Bonollo F, Urban J, Bonatto B, Botter M: ‘Gravity and low pressure die casting of aluminium alloys: a technical and economical benchmark’, Metall. Ital., 2005, 6, 23–32.
- Zhang B, Maijer D, Cockcroft S: ‘Development of a 3-D thermal model of the low-pressure die-cast (LPDC) process of A356 aluminum alloy wheels’, Mater. Sci. Eng. A, 2007, A465, 295.
- Andresen B: ‘Die casting engineering’; 2005, New York, Marcel Dekker.
- Esdaile R, Nguyen T, de Looze G, Murray M: Proc. 1st Int. Non-Ferrous Processing and Technology Conf., 213–218; 1997, Warrendale, PA, USA, TMS International.
- Muller W, Feikus F: AFS Trans., 1996, 104, 1111–1117.
- Singh D, Mallinson G, Panton S, Palle N: ‘Die design strategy for improved productivity and quality in die casting’, AFS Trans., 1999, 99, (25), 127–128.
- Wilkinson A, Wilson G, Connor A, Smith N: ‘CIM and control of pressure die-casting in the automotive industry’, Comput. Control Eng. J., 1994, 5, (3), 125–130.
- Palanisamy S, Nagarajah C, Graves K, Iovenitti P: ‘A hybrid signal pre-processing approach in processing ultrasonic signals with noise’, Int. J. Adv. Manuf. Technol., 2009, 42, (7–8), 766–771.
- Cox M, Harding R: ‘Influence of tilt filling on Weibull Modulus of 2L99 aluminium investment castings’, Mater. Sci. Technol., 2007, 23, (2), 214–224.
- Jeffery L: ‘Non-destructive testing: 5 ways to ensure defect-free deliveries’, Modern Cast., 88, 1998, 49–52.
- Bishenden W, Bhola R: ‘Die temperature control’, Proc. 20th Int. Die Casting Cong. and Exposition, Cleveland, OH, USA, November 1999, North American Die Casting Association, 161–164.
- Thompson S, Cockcroft S, Wells M: ‘Advanced light metals casting development: solidification of aluminium alloy A356’, Mater. Sci. Technol., 2004, 20, 194–200.
- American Society for Metals: ‘ASM metals reference’, 2nd edn; 1984, Metals Park, OH, ASM.
- Mills K: ‘Recommended values of thermophysical properties for selected commercial alloys’; 2002, Cambridge, Woodhead Publishing.
- Drosg M: ‘Dealing with uncertainties: a guide to error analysis’, 2nd edn; 2009, Berlin, Springer.
- Wu D, Chang M: ‘Use of Taguchi method to develop a robust design for the magnesium alloy die casting process, Mater. Sci. Eng., 2004, 379, 366–371.
- Kackar R: ‘Off-line quality control, parameter design and the Taguchi method’, J. Qual. Technol., 1985, 17, (4), 176–188.
- Logothetis N: ‘The role of data transformation in the Taguchi analysis’, Qual. Reliab. Eng. Int., 1988, 4, 49–61.