Characterisation and quantification of microstructural banding in dual phase steels Part 1 – General 2D study

References

• Howe HM: ‘The metallography of steel and cast iron’; 1916, New York, McGraw-Hill Book Company.
   Google Scholar
• Knutsen RD: ‘Influence of compositional banding on grain anisotropy in 3CR12 steel’, Mater. Sci. Technol., 1992, 8, 621.
   Web of Science ®Google Scholar
• Thompson S, Howell P: ‘Factors influencing ferrite/pearlite banding and origin of large pearlite nodules in a hypoeutectoid plate steel’, Mater. Sci. Technol., 1992, 8, 777–784.
   Web of Science ®Google Scholar
• Khalid F, Farooque M, ul Haq A, Khan AQ: ‘Role of ferrite/pearlite banded structure and segregation on mechanical properties of microalloyed hot rolled steel’, Mater. Sci. Technol., 1999, 15, 1209–1215.
   Web of Science ®Google Scholar
• Verhoeven JD: ‘A review of microsegregation induced banding phenomena in steels’, J. Mater. Eng. Perform., 2000, 9, (3), 286–296.
   Web of Science ®Google Scholar
• Offerman S, van Dijk N, Rekveldt M, Sietsma J, van der Zwaag S: ‘Ferrite/pearlite band formation in hot rolled medium carbon steel’, Mater. Sci. Technol., 2002, 18, 297–303.
   Web of Science ®Google Scholar
• Majka TF, Matlock DK, Krauss G: ‘Development of microstructural banding in low-alloy steel with simulated Mn segregation’, Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 2002, 33, 1627–1637.
   Web of Science ®Google Scholar
• Krauss G: ‘Solidification, segregation, and banding in carbon and alloy steels’, Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci., 2003, 34, 781–792.
   Web of Science ®Google Scholar
• Stauffer A, Koss D, McKirgan J: ‘Microstructural banding and failure of a stainless steel’, Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 2004, 35A, 1317–1324.
   Web of Science ®Google Scholar
• Grange RA: ‘Effect of microstructural banding in steel’, Metall. Trans., 1971, 2, 417.
   Web of Science ®Google Scholar
• Davies RG: ‘Influence of martensite composition and content on the properties of dual phase steels’, Metall. Trans. A, 1978, 9A, 671–679.
   Web of Science ®Google Scholar
• Marder AR: ‘Deformation characteristics of dual-phase steels’, Metall. Trans. A, 1982, 13A, 85–92.
   Web of Science ®Google Scholar
• Komenda J, Sandström R: ‘Assessment of pearlite banding using automatic image analysis: application to hydrogen-induced cracking’, Mater. Charact., 1993, 31, 143–153.
   Web of Science ®Google Scholar
• Komenda J, Sandström R: ‘Automatic assessment of a two-phase structure in the duplex stainless-steel SAF 2205’, Mater. Charact., 1993, 31, 155–165.
   Web of Science ®Google Scholar
• Kop TA, Sietsma J, van der Zwaag S: ‘Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure’, Mater. Sci. Technol., 2001, 17, 1569–1574.
   Web of Science ®Google Scholar
• Hwang B, Lee H, Kim Y, Lee S: ‘Analysis and prevention of side cracking phenomenon occurring during hot rolling of thick low-carbon steel plates’, Mater. Sci. Eng. A, 2005, A402, 177–187.
   Web of Science ®Google Scholar
• Mazinani M, Poole WJ: ‘Effect of martensite plasticity on the deformation behaviour of a low-carbon dual-phase steel’, Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 2007, 38, 328–339.
   Web of Science ®Google Scholar
• Gupta C, Nagchaudhury J, Chakravartty JK, Prasad RC: ‘Cyclic stress–strain characteristics of two microalloyed steels’, Mater. Sci. Technol., 2009, 25, (6), 760–769.
   Web of Science ®Google Scholar
• Tasan CC, Hoefnagels JPM, Geers MGD: ‘Microstructural banding effects clarified through micrographic digital image correlation’, Scr. Mater., 2010, 62, 835–838.
   Web of Science ®Google Scholar
• Rivera-Díaz-Del-Castillo PEJ, Sietsma J, van der Zwaag S: ‘A model for ferrite/pearlite band formation and prevention in steels’, Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 2004, 35, 425–433.
   Web of Science ®Google Scholar
• Xu W, Rivera-Díaz-Del-Castillo PEJ, van der Zwaag S: ‘Ferrite/pearlite band prevention in dual phase and trip steels: model development’, ISIJ Int., 2005, 45, (3), 380–387.
   Web of Science ®Google Scholar
• From A, Sandström R: ‘Assessment of banding in steels by using advanced image analysis’, Mater. Charact., 1998, 41, 11–26.
   Web of Science ®Google Scholar
• in ‘Annual book of ASTM standards’, Vol. 03.01, ‘Metals – mechanical testing; elevated and low-temperature tests: metallography’, ‘Standard practice for assessing the degree of banding or orientation of microstructures’, ASTM E 1268-99, 820–848, ASTM, West Conshohocken, PA, USA, 2000.
   Google Scholar
• Chmiela J, Słota D, Szala J: ‘Multiscale description of the inhomogeneity of multi-phase materials’, Mater. Charact., 2009, 60, 1145–1150.
   Web of Science ®Google Scholar
• Krebs B, Hazotte A, Germain L, Gouné: ‘Quantitative analysis of banded structures in dual-phase steels’, Image Anal. Stereol., 2010, 29, 85–90.
   Web of Science ®Google Scholar
• McGarrity KS, Sietsma J, Jongbloed G: ‘Characterisation and quantification of microstructural banding in dual phase steels. Part II: a case study extending to 3D’, Mater. Sci. Technol., 2012, 28, 903–910.
   Google Scholar
• Saltykov SA: ‘Stereometric metallography’, 2nd edn; 1958, Moscow, Metallurgizdat.
   Google Scholar
• Rasband W: ‘ImageJ’; 1997–2009, Bethesda, MD, US National Institutes of Health.
   Google Scholar
• Ridler TW, Calvard S: ‘Picture thresholding using an iterative selection method’, IEEE Trans. Syst. Man. Cybern., 1978, 8, 630–632.
   Web of Science ®Google Scholar
• Shapiro LG, Stockman G: ‘Computer vision’; 2002, Upper Saddle River, NJ, Prentice Hall.
   Google Scholar