Softening behaviour of alumina reinforced copper processed by equal channel angular pressing

References

• Tian B., Liu P., Song K., Li Y., Liu Y., Ren F. and Su J.: ‘Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite’, Mater. Sci. Eng. A, 2006, A435–A436, 705–710.
   Web of Science ®Google Scholar
• Song K., Liu P., Tian B., Dong Q. and Xing J.: ‘Stabilization of nano-Al2O3p/Cu composite after high temperature annealing treatment’, Mater. Sci. Forum, 2005, 475–479, 993–996.
   Google Scholar
• Kim S. H. and Lee D. N.: ‘Annealing behavior of alumina dispersion-strengthened copper strips rolled under different conditions’, Metall. Mater. Trans. A, 2002, 33A, 1605–1616.
   Google Scholar
• Lee J., Kim Y. C., Lee S., Ahn S. and Kim N. J.: ‘Correlation of the microstructure and mechanical properties of oxide-dispersion-strengthened coppers fabricated by internal oxidation’, Metall. Mater. Trans. A, 2004, 35A, 493–502.
   Web of Science ®Google Scholar
• Guo M., Wang M., Lei R., Tan W. and Jin P.: ‘Comparison study on the annealing behaviors of dispersion strengthened copper alloys with different nanoparticles’, Rare Met., 2007, 26, 456–462.
   Web of Science ®Google Scholar
• Afshar A. and Simchi A.: ‘Abnormal grain growth in alumina dispersion-strengthened copper produced by an internal oxidation process’, Scr. Mater., 2008, 58, 966–969.
   Web of Science ®Google Scholar
• Rajkovic V., Bozic D., Devecerski A., Bojanic S. and Jovanovic M. T.: ‘Strength and thermal stability of Cu–Al2O3 composite obtained by internal oxidation’, Rev. Metal., 2010, 46, 520–529.
   Web of Science ®Google Scholar
• Shen K., Guo M. and Wang M.: ‘Recrystallization characteristics of a fine grained copper alloy’, Mater. Chem. Phys., 2010, 120, 709–714.
   Web of Science ®Google Scholar
• Lugo N., Llorca N., Sunol J. J. and Cabrera J. M.: ‘Thermal stability of ultrafine grains size of pure copper obtained by equal-channel angular pressing’, J. Mater. Sci., 2010, 45, 2264–2273.
   Web of Science ®Google Scholar
• Molodova X., Gottstein G., Winning M. and Hellmig R. J.: ‘Thermal stability of ECAP processed pure copper’, Mater. Sci. Eng. A, 2007, A460–A461, 204–213.
   Google Scholar
• Lebedev A. B., Pulnev S. A., Kopylov V. I., Burenkov Y. u. A., Vetrov V. V. and Vylegzhanin O. V.: ‘Thermal stability of sub-microcrystalline copper and Cu: ZrO2 composite’, Scr. Mater., 1996, 35, 1077–1081.
   Web of Science ®Google Scholar
• Monshat H., Serajzadeh S., Akhgar J. M. and Kamankesh A.: ‘Effect of strain path change on mechanical properties and final microstructure of Cu–Al2O3 in equal channel angular pressing’, Mater. Sci. Technol., 2012, 29, 210–218.
   Web of Science ®Google Scholar
• Fathy A., Shehata F., Abdelhameed M. and Elmahdy M.: ‘Compressive and wear resistance of nanometric alumina reinforced copper matrix composites’, Mater. Des., 2012, 36, 100–107.
   Web of Science ®Google Scholar
• Basavaraj V. P., Chakkingal U. and Kumar T. S. P.: ‘Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation’, J. Mater. Process. Technol., 2009, 209, 89–95.
   Web of Science ®Google Scholar
• Valiev R. Z. and Langdon T. G.: ‘Principles of equal-channel angular pressing as a processing tool for grain refinement’, Prog. Mater. Sci., 2006, 51, 881–981.
   Web of Science ®Google Scholar
• Hansen N. and Ralph B.: ‘Additive strengthening mechanisms in dispersion hardened polycrystals’, Acta Metall., 1986, 34, 1955–1962.
   Google Scholar
• Rajkovic V., Bozic D. and Jovanovic M. T.: ‘Effects of copper and Al2O3 particles on characteristics of Cu–Al2O3 composites’, Mater. Des., 2010, 31, 1962–1970.
   Web of Science ®Google Scholar
• Humphreys F. J. and Martin J. W.: ‘The effect of dispersed silica particles on the recovery and recrystallization of deformed copper crystals’, Acta Metall., 1966, 14, 775–781.
   Google Scholar
• Jazaeri H. and Humphreys F. J.: ‘The transition from discontinuous to continuous recrystallization in some aluminium alloys II – annealing behavior’, Acta Mater., 2004, 52, 3251–3262.
   Web of Science ®Google Scholar
• Kalu P. N. and Waryoba D. R.: ‘A JMAK-microhardness model for quantifying the kinetics of restoration mechanisms in inhomogeneous microstructure’, Mater. Sci. Eng. A, 2007, A464, 68–75.
   Google Scholar
• Humphreys F. J. and Hatherly M.: ‘Recrystallization and related annealing phenomena’; 2004, Oxford, Elsevier.
   Google Scholar
• Cao W. Q., Gu C. F., Pereloma E. V. and Davies C. H. J.: ‘Stored energy, vacancies and thermal stability of ultra-fine grained copper’, Mater. Sci. Eng. A, 2008, A492, 74–79.
   Google Scholar
• Takayama A., Yang X., Miura H. and Sakai T.: ‘Continuous static recrystallization in ultrafine-grained copper processed by multi-directional forging’, Mater. Sci. Eng. A, 2008, A478, 221–228.
   Web of Science ®Google Scholar
• Jiang H., Zhu Y. T., Butt D. P., Alexandrov I. V. and Lowe T. C.: ‘Microstructural evolution, microhardness and thermal stability of HPT-processed Cu’, Mater. Sci. Eng. A, 2000, A290, 128–138.
   Web of Science ®Google Scholar
• Benchabane G., Boumerzoug Z., Gloriant T. and Thibon I.: ‘Microstructural characterization and recrystallization kinetics of cold rolled copper’, Physica B, 2011, 406B, 1973–1976.
   Google Scholar
• Zhao Y. H., Liao X. Z., Jin Z., Valiev R. Z. and Zhu Y. T.: ‘Microstructures and mechanical properties of ultrafine grained 7075Al alloy processed by ECAP and their evolutions during annealing’, Acta Mater., 2004, 52, 4589–4599.
   Web of Science ®Google Scholar