Influence of copper on hardness of amorphous As–Se–I thin films

References

• Popescu M.: ‘Chalcogenides – past, present, future’, J. Non-Cryst. Solids, 2010, 352, 887–891.
   Google Scholar
• Sanghera J. S. and Aggarwal I. D.: ‘Active and passive chalcogenide glass optical fibers for IR applications’, J. Non-Cryst. Solids, 1999, 256–257, 6–16.
   Web of Science ®Google Scholar
• Kawaguchi T.: ‘Photoinduced metastability in Ag-containing chalcogenide glasses’, J. Non-Cryst. Solids, 2004. 345–346, 265–269.
   Web of Science ®Google Scholar
• Bollee N., Hertogen P., Adriaenssens G. J., Senemaud C. and Gheorghiu-de La Rocque A.: ‘Copper-induced changes in the properties of arsenic chalcogenides’, Semiconductors, 1998, 32, 873–878.
   Web of Science ®Google Scholar
• Popescu M.: ‘Disordered chalcogenide optoelectronic materials: phenomena and applications’, J. Optoelectron. Adv. Mater., 2005, 4, 2189–2210.
   Google Scholar
• Schulte A., Rivero C., Richardson K., Hamel V., Villeneuve A., Galstian T. and Vallee R.: ‘Bulk-film structural differences of chalcogenide glasses probed in situ by near-infrared waveguide Raman spectroscopy’, Opt. Commun., 2001, 198, 125–128.
   Web of Science ®Google Scholar
• Wagner T., Krbal M., Frumar M., Nemec P., Frumarova B., Vlcek M. i. l. and Kasap S. O.: ‘The Agx(As0·33S0·67)100−x amorphous chalcogenide bulk glasses and films prepared by pulsed laser deposition’, Phys. Chem. Glasses, 2006, 47, 158–161.
   Google Scholar
• Iovu M. S., Shutov S. D., Andriesh A. M., Kamitsos E. I., Varsamis C. P. E., Furniss D., Seddon A. B. and Popescu M.: ‘Spectroscopic studies of bulk As2S3 glasses and amorphous films doped with Dy, Sm and Mn’, J. Optoelectron. Adv. Mater., 2001, 3, 443–454.
   Web of Science ®Google Scholar
• Guin J. P., Rouxel T., Sangleboeuf J. C., Melscoët I. and Lucas J.: ‘Hardness, toughness and scratchability of germanium–selenium chalcogenide glasses’, J. Am. Ceram. Soc., 2002, 85, 1545–1552.
   Web of Science ®Google Scholar
• Lukić S. R. and Petrović D. M.: ‘Thermal analysis and X-ray diffraction investigation of the copper (I) selenoarsenate (Cu3AsSe4)’, J. Optoelectron. Adv. Mater., 1999, 1, 43–48.
   Web of Science ®Google Scholar
• Lukić S. R., Petrović D. M., Avramov M. I. and Skuban F.: ‘The estimate of the quality of Cu–As–Se–I thin films from phototechnical aspect’, Rev. Res. Fac. Sci. Novi. Sad. Phys. Ser., 1996, 26, 42–46.
   Google Scholar
• Lukić-Petrović S. R., Đačanin L. j. R., Kisić R. V. and Antić A. M.: ‘Instrumented indentation testing of As2Se3–AsI3 pseudobinary glasses with copper’, J. Mater. Res., 2012, 27, 2867– 2871.
   Web of Science ®Google Scholar
• Štrbac D. D., Lukić-Petrović S. R., Petrović D. M., Videnović I. R. and Dramićanin M.: ‘Instrumented indentation testing of Cu–As–Se–I thin amorphous films’, Proc. European Material Research Society-Spring Meet., Nice, France, May 2011, European Material Research Society. http:/www.emrs-strasbourg.com/files/USB%2011/symposium_k.pdf pages 14–15.
   Google Scholar
• Lukić S. R., Petrović D. M., Gut I. O. and Avramov M. I.: ‘Complex non-crystalline chalcogenides: technology of preparation and spectral characteristics’, J. Res. Phys., 2006, 30, 111–130.
   Google Scholar
• Oliver W. C. and Pharr G. M.: ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments’ J. Mater. Res., 1992, 7, 1564–1583.
   Web of Science ®Google Scholar
• Oliver W. C. and Pharr G. M.: ‘Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology’, J. Mater. Res., 2004, 19, 3–20.
   Web of Science ®Google Scholar
• Štrbac D. D., Lukić S. R., Petrović D. M., Gonzalez-Leal J. M., Srinivasan A. and Štrbac G. R.: ‘Influence of substrate absorption on accuracy of determination of refractive index and thickness of uniform thin chalcogenide Cu1[As2(S0·5Se0·5)3]99 film’, Thin Solid Films, 2010, 518, 5679–5682.
   Web of Science ®Google Scholar
• Swanepoel R.: ‘Determination of the thickness and optical constants of amorphous silicon’ J. Phys. E, 1983, 16E, 1214–1222.
   Google Scholar
• Swanepoel R.: ‘Determination of surface roughness and optical constants of inhomogeneous amorphous silicon films’, J. Phys. E, 1984, 17E, 896–903.
   Google Scholar
• Swanepoel R.: ‘Transmission and reflection of an absorbing thin film on an absorbing substrate’, S. Afr. J. Phys., 1989, 12, 148–156.
   Google Scholar
• Huang Y. C. and Chang S. Y.: ‘Substrate effect on mechanical characterizations of aluminum-doped zinc oxide transparent conducting films’, Surf. Coat. Technol., 2010, 20, 3147–3153.
   Google Scholar
• Chen S., Liu L. and Wang T.: ‘Investigation of the mechanical properties of thin films by nanoindentation, considering the effects of thickness and different coating–substrate combinations’, Surf. Coat. Technol., 2005, 1, 25–32.
   Google Scholar
• Lukić S. R., Skuban F., Petrović D. M. and Šiđanin L.: ‘Effect of copper on density and microhardness of amorphous AsSeyIz’, J. Mater. Sci. Lett., 2000, 19, 139–141.
   Google Scholar
• Lukić S. R., Petrović D. M., Petrović A. F. and Rosola I. J.: ‘Dispersion of refractive index of the amorphous system Cux(As38·5Se54I7·5)100−x’, J. Mater. Sci. Lett., 1994, 13, 1769–1770.
   Google Scholar
• Kostadinova O., Chrissanthopoulos A., Petkova T., Petkov P. and Yannopoulos S. N.: ‘Structure and vibrational modes of AgI-doped AsSe glasses: Raman scattering and ab initio calculation’, J. Solid State Chem., 2011, 2, 447–454.
   Google Scholar
• Popescu M. A.: in ‘Non-crystalline chalcogenides’, (ed. Carley L. R. .), Vol. 8, 24; 2002, New York, Kluwer Academic Publishers.
   Google Scholar
• Memedov S., Bolotov A., Kisliuk A., Brinker L., Soltwisch M., Vlček M. and Sklenar A.: ‘Structure of chalcogenide glasses in the As2Se3–CuI system’, Solid State Commun., 1999, 112, 545–548.
   Web of Science ®Google Scholar
• Lin F., Bian G. Q., Lei Z. X., Lu Z. J. and Dai J.: ‘Solvothermal growth and morphology study of Cu2Se films’, Solid State Sci., 2009, 5, 972–975.
   Google Scholar
• Liang K. S., Bienenstock A. and Bates C. W.: ‘Structural studies of glassy CuAsSe2 and Cu–As2Se3 alloys’, Phys. Rev. B, 1974, 4B, 1528–1536.
   Google Scholar