Comparative study on dissimilar welding of Inconel 718 and Udimet 500 precipitation strengthened nickel based superalloys

References

• Murthy G. V. S., Sridhar G., Kumar A. and Jayakumar T.: ‘Characterization of intermetallic precipitates in a Nimonic alloy by ultrasonic velocity measurements’, Mater. Charact., 2009, 60, 234–239.
   Web of Science ®Google Scholar
• Tiley J., Viswanathan G. B., Srinivasan R., Banerjee R., Dimiduk D. M. and Fraser H. L.: ‘Coarsening kinetics of γ′ precipitates in the commercial nickel base Superalloy René 88 DT’, Acta. Mater., 2009, 57, 2538–2549.
   Web of Science ®Google Scholar
• Murthy G. V. S., Ghosh S., Das M., Das G. and Ghosh R. N.: ‘Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263’, Mater. Sci. Eng. A, 2008, A488, 398–405.
   Web of Science ®Google Scholar
• Yeni C. and Koc-ak M.: ‘Fracture analysis of laser beam welded superalloys Inconel 718 and 625 using the FITNET procedure’, Int. J. Pres. Ves. Pip., 2008, 85, 532–539.
   Web of Science ®Google Scholar
• Ferro P., Zambon A. and Bonollo F.: ‘Investigation of electron-beam welding in wrought Inconel 706 – experimental and numerical analysis’, Mater. Sci. Eng. A, 2005, A392, 94–105.
   Web of Science ®Google Scholar
• Pouranvari M., Ekrami A. and Kokabi A. H.: ‘Microstructure development during transient liquid phase bonding of GTD-111 nickel-based superalloy’, J. Alloys Compd, 2008, 46, 1641–1647.
   Google Scholar
• Radis R., Schaffer M., Albu M., Kothleitner G., Polt P. and Kozeschnik E.: ‘Multimodal size distributions of c0 precipitates during continuous cooling of Udimet 720 Li’, Acta. Mater., 2009, 57, 5739–5747.
   Web of Science ®Google Scholar
• Hong H. U., Kim I. S., Choi B. G., Kim M. Y. and Jo C. Y.: ‘The effect of grain boundary serration on creep resistance in a wrought nickel-based superalloy’, Mater. Sci. Eng. A, 2009, A517, 125–131.
   Web of Science ®Google Scholar
• Lachowicz M., Dudzinski W., Haimann K. and Podrez-Radziszewska M.: ‘Microstructure transformations and cracking in the matrix of γ–γ′ superalloy Inconel 713C melted with electron beam’, Mater. Sci. Eng. A, 2008, A479, 269–276.
   Web of Science ®Google Scholar
• Qian M. and Lippold J. C.: ‘Liquation phenomena in the simulated heat-affected zone of alloy 718 after multiple postweld heat treatment cycles’, Weld. J., 2003, 145–150.
   Google Scholar
• Nematzadeh F., Akbarpour M. R., Parvizi S., Kokabi A. H. and Sadrnezhaad S. K.: ‘Effect of welding parameters on microstructure, mechanical properties and hot cracking phenomenon in Udimet 520 superalloy’, Mater. Des., 2012, 36, 94–99.
   Web of Science ®Google Scholar
• Ojo O. A., Richards N. L. and Chaturvedi M. C.: ‘Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloy’, Scr. Mater., 2004, 50, 641–646.
   Web of Science ®Google Scholar
• Dupont J. N., Lippold J. and Kiser S.: ‘Welding metallurgy and weldability of nickel-base alloys’; 2009, Hoboken, NJ, Wiley and Sons Inc. Publication.
   Google Scholar
• Egbewande A. T., Zhang H. R., Sidhu R. K. and Ojo O. A.: ‘Improvement in laser weldability of Inconel 738 superalloy through microstructural modification’, Metall. Mater. Trans. A, 2009, 40A, 2694–2704.
   Web of Science ®Google Scholar
• Lehockey E. M., Palumbo G. and Lin P.: ‘Improving the weldability and service performance of nickel and iron-based superalloys by grain boundary engineering’, Metall. Mater. Trans. A, 1998, 29A, 3069–3079.
   Web of Science ®Google Scholar
• Pang M., Yu G., Wang H. H. and Zheng C. Y.: ‘Microstructure study of laser welding cast nickel-based superalloy K418’, J. Mater. Process. Technol., 2008, 207, 271–275.
   Web of Science ®Google Scholar
• Banerjee K., Richards N. L. and Chaturvedi M. C.: ‘Effect of filler alloys on heat-affected zone cracking in preweld heat-treated IN-738 LC gas–tungsten–arc welds’, Metall. Mater. Trans. A, 2005, 36A, 1881–1890.
   Web of Science ®Google Scholar
• Ojo O. A. and Chaturvedi M. C.: ‘Liquation microfissuring in the weld heat-affected zone of an overaged precipitation-hardened nickel-base superalloy’, Metall. Mater. Trans. A, 2007, 38A, 356–359.
   Web of Science ®Google Scholar
• Zhang H. R., Ojo O. A. and Chaturvedi M. C.: ‘Nanosize boride particles in heat-treated nickel base superalloys’, Scr. Mater., 2008, 58, 167–170.
   Web of Science ®Google Scholar
• Egbewande A. T., Buckson R. A. and Ojo O. A.: ‘Analysis of laser beam weldability of Inconel 738 superalloy’, Mater. Charact., 2010, 61, 569–574.
   Web of Science ®Google Scholar
• Qian M. and Lippold J. C.: ‘The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys’, Acta. Mater., 2003, 51, 3351–3361.
   Web of Science ®Google Scholar
• Qian M. and Lippold J. C.: ‘The effect of rejuvenation heat treatments on the repair weldability of wrought alloy 718’, Mater. Sci. Eng. A, 2003, A340, 225–231.
   Web of Science ®Google Scholar
• Dupont J. N.: ‘A combined solubility product/new PHACOMP approach for estimating temperatures of secondary solidification reactions in superalloy weld metals containing Nb and C’, Metall. Mater. Trans. A, 1998, 29A, 1449–1456.
   Web of Science ®Google Scholar
• Odabasi A., Unlu N., Goller G. and Ieruslu M. N.: ‘A study on laser beam welding (LBW) technique: effect of heat input on the microstructural evolution of superalloy Inconel 718’, Metall. Mater. Trans. A, 2010, 41A, 2357–2365.
   Web of Science ®Google Scholar
• Naffakh H., Shamanian M. and Ashrafizadeh F.: ‘Weldability in dissimilar welds between type 310 austenitic stainless steel and Alloy 657’, J. Mater. Sci., 2008, 43, 5300–5304.
   Web of Science ®Google Scholar
• Naffakh H., Shamanian M. and Ashrafizadeh F.: ‘Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657’, J. Mater. Process. Technol., 2009, 209, 3628–3639.
   Web of Science ®Google Scholar
• Ojo O. A. and Tancret F.: ‘Clarification on Thermo-Calc and Dictra simulation of constitutional liquation of gamma prime (γ′) during welding of Ni-base superalloys’, Comput. Mater. Sci., 2009, 45, 388–389.
   Web of Science ®Google Scholar
• Duont J. N., Robino C. V., Michael J. R., Notis M. R. and Marder A. R.: ‘Solidification of Nb-bearing superalloys: Part I. Reaction sequences’, Metall. Mater. Trans. A, 1998, 29A, 2785–2796.
   Web of Science ®Google Scholar
• Albuquerque V. H. C., Silva C. C., Normando P. G., Moura E. P. and Tavares J. M. R. S. T.: ‘Thermal aging effects on the microstructure of Nb-bearing nickel based superalloy weld overlays using ultrasound techniques’, Mater. Des., 2012, 36, 337–347.
   Web of Science ®Google Scholar
• Naffakh H., Shamanian M. and Ashrafizadeh F.: ‘Microstructural evolutions in dissimilar welds between AISI 310 austenitic stainless steel and Inconel 657’, J. Mater. Sci., 2010, 45, 2564–2573.
   Web of Science ®Google Scholar
• Abdul Jawwad A. K., Strangwood M. and Davis C. L.: ‘Microstructural modification in full penetration and partial penetration electron beam welds in Inconel-718 (IN-718) and its effect on fatigue crack initiation’, Metall. Mater. Trans. A, 2005, 36A, 1237–1247.
   Web of Science ®Google Scholar
• Cao X., Rivaux B., Jahazi M., Cuddy J. and Birur A.: ‘Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser’, J. Mater. Sci., 2009, 44, 4557–4571.
   Web of Science ®Google Scholar
• Hong J. K., Park J. H., Park N. K., Eom I. S., Kim M. B. and Kang C. Y.: ‘Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding’, J. Mater. Process. Technol., 2008, 201, 515–520.
   Web of Science ®Google Scholar
• Danis Y. Arvieu C., Lacoste E., Larrouy T. and Quenisset J. M.: ‘An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel 738LC superalloy’, Mater. Des., 2010, 31, 402–416.
   Web of Science ®Google Scholar
• Jeon M., Lee J. H., Woo T. K. and Kim S.: ‘Effect of welding and post-weld heat treatment on tensile properties of Nimonic 263 at room and elevated temperatures’, Metall. Mater. Trans. A, 2011, 42A, 974–985.
   Web of Science ®Google Scholar
• Abdul Jawwad A. K., Strangwood M. and Davis C. L.: ‘The role of the slope out region on fatigue crack initiation in electron beam welded waspaloy’, Metall. Mater. Trans. A, 2003, 34A, 1637–1645.
   Web of Science ®Google Scholar
• Naffakh H., Shamanian M. and Ashrafizadeh F.: ‘Influence of artificial aging on microstructure and mechanical properties of dissimilar welds between 310 stainless steel and Inconel 657’, Metall. Mater. Trans. A, 2008, 39A, 2403–2415.
   Web of Science ®Google Scholar
• Ebrahimzadeh H. and Akbari Mousavi S. A. A.: ‘Investigation on pulsed Nd:YAG laser welding of 49Ni–Fe soft magnetic alloy’, Mater. Des., 2012, 38, 115–123.
   Web of Science ®Google Scholar
• Dupont J. N.: ‘Microstructural development and solidification cracking susceptibility of a stabilized stainless steel’, Weld. J., 1999, 253–263.
   Web of Science ®Google Scholar
• Moosavy H., Aboutalebi M. R. and Seyedein S. H.: ‘An analytical algorithm to predict weldability of precipitation-strengthened nickel-base superalloys’, J. Mater. Process. Technol., 2012, 212, 2210–2218.
   Web of Science ®Google Scholar