Influence of tungsten on microstructure and wear resistance of iron base hardfacing alloy

References

• Kashani H., Amadeh A. and Farhani M.: ‘Improvement of wear resistance of hot working tool steel by hardfacing. Part 1 – effect of microstructure and hardness’, Mater. Sci. Technol., 2007, 23, 165–170.
   Web of Science ®Google Scholar
• Kashani H., Amadeh A. and Vatanara M. R.: ‘Improvement of wear resistance of hot working tool steel by hardfacing. Part 2 – case study’, Mater. Sci. Technol., 2008, 24, 356–360.
   Web of Science ®Google Scholar
• Amushahi M. H., Ashrafizadeh F. and Shamanian M.: ‘Characterization of boride-rich hardfacing alloy on carbon steel by arc spray and GMAW processes’, Surf. Coat. Technol., 2010, 204, 2723–2728.
   Web of Science ®Google Scholar
• Das C. R., Albert S. K., Bhaduri A. K. and Nithya R.: ‘Effects of dilution on microstructure and wear behaviour of NiCr hardface deposits’, Mater. Sci. Technol., 2007, 23, 771–779.
   Web of Science ®Google Scholar
• Chatterjee S. and Pal T. K.: ‘Wear behaviour of hardfacing deposits on cast iron’, Wear, 2003, 255, 417–425.
   Web of Science ®Google Scholar
• Liu D. S., Liu R. P., Wei Y. H., Qiu Y., Pan P., Zhu K. and Gao W. L.: ‘Comparative behaviour of cobalt and iron base hardfacing alloys’, Surf. Eng., 2012, 28, 338–344.
   Web of Science ®Google Scholar
• Dwivedi D. K.: ‘Microstructure and abrasive wear behaviour of iron base hardfacing’, Mater. Sci. Technol., 2004, 20, 1326–1330.
   Web of Science ®Google Scholar
• Kazemipour M., Shokrollahi H. and Sharafi S. h.: ‘The influence of the matrix microstructure on abrasive wear resistance of heat-treated Fe–32Cr–4·5C wt% hardfacing alloy’, Tribol. Lett., 2010, 39, 181–192.
   Web of Science ®Google Scholar
• Scandella F. and Scandella R.: ‘Development of hardfacing material in Fe–Cr–Nb–C system for use under highly abrasive conditions’, Mater. Sci. Technol., 2003, 20, 93–105.
   Web of Science ®Google Scholar
• Jiang M., Li Z. X., Wang Y. J., Shi Y. W., Jiang J. M. and Li X. B.: ‘Effect of vanadium on microstructures and properties of Fe–Cr–C self-shielded metal cored hardfacing alloys’, Sci. Technol. Weld. Join., 2008, 13, 114–117.
   Web of Science ®Google Scholar
• Liu D. S., Liu R. P. and Wei Y. H.: ‘Effect of titanium additive on microstructure and wear performance of iron-based slag-free self-shielded flux-cored wire’, Surf. Coat. Technol., 2012, 207, 579–586.
   Web of Science ®Google Scholar
• Wang X. H., Zhang M., Zou Z. D. and Qu S. Y.: ‘Microstructure and wear properties of TiC–VC reinforced iron based hardfacing layers ’, Mater. Sci. Technol., 2006, 22, 193–198.
   Web of Science ®Google Scholar
• Zhang Y., Sun Y. F., Guan S. K., Deng X. and Yan X. G.: ‘Effect of titanium and tungsten on the structure and properties of heat-abrasion resistant steel’, Mater. Sci. Eng. A, 2008, A478, 214–220.
   Web of Science ®Google Scholar
• Gurumoorthy K., Kamaraj M., Rao K. P. and Venugopal S.: ‘Microstructure and wear characteristics of nickel based hardfacing alloys deposited by plasma transferred arc welding’, Mater. Sci. Technol., 2006, 22, 975–980.
   Web of Science ®Google Scholar
• Conde R. H.: ‘Wear resistant coatings’; 1986, Buenos Aires, Conarco Technical Bulletin.
   Google Scholar
• Chakraborty G., Albert S. K. and Bhaduri A. K.: ‘Effect of dilution and cooling rate on microstructure and magnetic properties of Ni base hardfacing alloy deposited on austenitic stainless steel’, Mater. Sci. Technol., 2012, 28, 454–459.
   Web of Science ®Google Scholar
• Calos N. J., Christodoulou P., Graham E., Cousens D. and Bekessy L.: ‘Structural studies of ferrous alloys containing boron’; 1999, Brisbane, The University of Queensland.
   Google Scholar
• Bedolla-Jacuinde A.: ‘Microstructure of vanadium, niobium, and titanium alloyed high-chromium cast irons’, Int. J. Cast Met. Res., 2001, 13, 343–361.
   Web of Science ®Google Scholar
• Li J. and Smith R. W.: Proc. 4th Decennial Int. Conf. on ‘Solidification processing’, Sheffield, UK, July 1997, University of Sheffield, 481–488.
   Google Scholar
• Pearce J. T. H.: ‘Examination of MC3 carbides in high chromium cast irons using thin foil transmission electron microscopy’, J. Mater. Sci. Lett., 1983, 2, 428–432.
   Google Scholar
• Correa R., Bedolla-Jacuinde A., Zuno-Silva J., Cardoso E. and Mejía I.: ‘Effect of boron on the sliding wear of directionally solidified high-chromium white irons’, Wear, 2009, 267, 495–504.
   Web of Science ®Google Scholar
• Lampke T., Wielage B., Pokhmurska H., Rupprecht C., Schuberth S., Drehmann R. and Schreiber F.: ‘Development of particle-reinforced nanostructured iron-based composite alloys for thermal spraying’, Surf. Coat. Technol., 2011, 205, 3671–3676.
   Web of Science ®Google Scholar
• Wang Q. B. and Li X. Y.: ‘Effect of Nb, V, and W on the microstructure and abrasion resistance of Fe–Cr–C hardfacing alloys’, Weld. J., 2010, 89, 133–139.
   Web of Science ®Google Scholar