References
- Papis KJM, Hallstedt B, Loffler JF and Uggowitzer PJ: ‘Interface formation in aluminium–aluminium compound casting’, Acta Mater., 2008, 56, 3036–3043.
- Ashby MF and Brechet YJM: ‘Designing hybrid materials’, Acta Mater., 2003, 51, 5801–5821.
- Song XY, Sun JB, Zhong DS, Yu YS, Wang TM, Cao ZQ and Li TJ: ‘Study on Al/Mg compound materials by solid–liquid bonding method’, Mater. Res. Innov., 2012, 16, 51–55.
- Turriff DM, Corbin SF and Kozdras M: ‘Diffusional solidification phenomena in clad aluminum automotive braze sheet’, Acta Mater., 2010, 58, 1332–1341.
- Lee JS, Son HT, Oh IH, Kang CS, Yun CH, Lim SC and Kwon HC: ‘Fabrication and characterization of Ti–Cu clad materials by indirect extrusion’, J. Mater. Process. Technol., 2007, 187–188, 653–656.
- Lapovok R, Ng HP, Tomus D and Estrin Y: ‘Bimetallic copper–aluminium tube by severe plastic deformation’, Scr. Mater., 2012, 66, 1081–1084.
- Akbari-Mousavi SAA, Barrett LM and Al-Hassani STS: ‘Explosive welding of metal plates’, J. Mater. Process. Technol., 2008, 202, 224–239.
- Liu L, Wang H, Song G and Ye J: ‘Microstructure characteristics and mechanical properties of laser weld bonding of magnesium alloy to aluminum alloy’, J. Mater. Sci., 2007, 42, 565–572.
- Wang DQ, Shi ZY and Qi RB: ‘Cladding of stainless steel on aluminum and carbon steel by interlayer diffusion bonding’, Scr. Mater., 2007, 56, 369–372.
- Marukovich EI, Branovitsky AM, Na YS, Lee JH and Choi KY: ‘Study on the possibility of continuous-casting of bimetallic components in condition of direct connection of metals in a liquid state’, Mater. Des., 2006, 27, 1016–1026.
- Zhang WW, Rohatgi PK, Shao M and Li YY: ‘Effect of plastic deformation on microstructure and hardness of 2024/3003 gradient composite ingot prepared by continuous casting’, Mater. Sci. Eng. A, 2009, A505, 120–130.
- Liang H, Xue ZY, Wu CJ, Liu Q and Wu Y: ‘Research on continuous core-filling casting forming process of copper-clad aluminum bimetal composite material’, Acta Metall. Sinica, 2010, 23, 206–214.
- Gupta A, Lee ST and Wagstaff RB: ‘Direct chill casting of aluminium–manganese against aluminium–silicon layer via Novelis Fusion process’, Mater. Technol., 2007, 22, 71–75.
- Wagstaff RB, Lloyd DJ and Bischoff TF: ‘Direct chill casting of clad ingot’, Mater. Sci. Forum, 2006, 519–521, 1809–1814.
- Fu Y, Jie JC, Wu L, Park J, Sun JB, Kim J and Li TJ: ‘Microstructure and mechanical properties of Al–1Mn and Al–10Si alloy circular clad ingot prepared by direct chill casting’, Mater. Sci. Eng. A, 2013, A561, 239–244.
- Jiang HX, Zhang HT, Qin K and Cui JZ: ‘Direct-chill semi-continuous casting process of three layer composite ingot of 4045/3004/4045 aluminum alloys’, Trans. Nonferr. Met. Soc. China, 2011, 21, 1692–1697.
- Liu N, Jie JC, Lu YP, Wu L, Fu Y and Li TJ: ‘Characteristics of clad aluminum hollow billet prepared by horizontal continuous casting’, J. Mater. Process. Technol., 2014, 214, 60–66.
- Wang TM, Li J, Du YY, Yan ZM, Sun JB, Cai SW, Xu JJ and Li TJ: ‘Study on continuous casting of cladding aluminium alloys with electromagnetic brake’, Mater. Res. Innov., 2010, 14, 271–276.
- Li YY, Fei J, Chen WP, Zhang WW and Shao M: ‘Preparation of 2024/3003 gradient materials by semi-continuous casting using double-stream-pouring technique’, J. Cent. South Univ. Technol., 2002, 9, 229–234.
- Sun JB, Song XY, Wang TM, Yu YS, Sun M, Cao ZQ and Li TJ: ‘The microstructure and property of Al–Si alloy and Al–Mn alloy bimetal prepared by continuous casting’, Mater. Lett., 2012, 67, 21–23.
- Zhang P, Li SX and Zhang ZF: ‘General relationship between strength and hardness’, Mater. Sci. Eng. A, 2011, A529, 62–73.
- Lloyd DJ, Gallerneault M and Wagstaff RB: ‘The deformation of clad aluminum sheet produced by direct chill casting’, Metall. Mater. Trans. A, 2010, 41A, 2093–2103.