Effect of thermal cycling induced phosphorus grain boundary segregation on embrittlement of welding heat affected zones in 2·25Cr–1Mo steel

References

• Li Y and Baker TN: ‘Effect of morphology of martensite–austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels’, Mater. Sci. Technol., 2010, 26, 1029–1040.
   Web of Science ®Google Scholar
• Lambert-Perlade A, Gourgues AF, Besson J, Sturel T and Pineau A: ‘Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel’, Metall. Mater. Trans. A, 2004, 35A, 1039–1053.
   Web of Science ®Google Scholar
• Chen JH, Kikuta Y, Araki T, Yoneda M and Matsuda Y: ‘Micro-fracture behaviour induced by M–A constituent (Island Martensite) in simulated welding heat affected zone of HT80 high strength low alloyed steel’, Acta Metall., 1984, 32, 1779–1788.
   Google Scholar
• Lan LY, Qiu CL, Zhao DW, Gao XH and Du LX: ‘Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel’, Mater. Sci. Eng. A, 2011, A529, 192–200.
   Google Scholar
• Moitra A, Parameswaran P, Sreenivasan PR and Mannan SL: ‘A toughness study of the weld heat-affected zone of a 9Cr–1Mo steel’, Mater. Charact., 2002, 48, 55–61.
   Web of Science ®Google Scholar
• Kameda J and Mcmahon CJ: ‘The effects of Sb, Sn, and P on the strength of grain boundaries in a Ni–Cr steel’, Metall. Trans. A, 1981, 12A, 31–37.
   Web of Science ®Google Scholar
• Wu J, Song SH, Weng LQ, Xi TH and Yuan ZX: ‘An Auger electron spectroscopy study of phosphorus and molybdenum grain boundary segregation in a 2·25Cr1Mo steel’, Mater. Charact., 2008, 59, 261–265.
   Web of Science ®Google Scholar
• Hippsley CA, Knott JF and Edwards BC: ‘A study of stress relief cracking in 214Cr 1Mo steel-I. The effects of P segregation’, Acta Metall., 1980, 28, 869–885.
   Google Scholar
• Dhooge A, Dolby RE, Sebille J, Steinmetz R and Vinckier AG: ‘A review of work related to reheat cracking in nuclear reactor pressure vessel steels’, Int. J. Pres. Ves. Pip., 1978, 6, 329–409.
   Google Scholar
• Chappuis AG and Davis CL: ‘Sulphure segregation and precipitation in HAZ of boiler steel thick section welds’, Mater. Sci. Technol., 2006, 22, 937–943.
   Web of Science ®Google Scholar
• Kim BJ, Mitsui H, Kasada R and Kimura A: ‘Evaluation of impact properties of weld joint of reactor pressure vessel steels with the use of miniaturized specimens’, J. Nucl. Sci. Technol., 2012, 49, 618–631.
   Web of Science ®Google Scholar
• ‘2010 ASME boiler and pressure vessel code (BPVC)’, section I, ‘Rules for construction of power boilers’, American Society of Mechanical Engineers, New York, USA, 2010.
   Google Scholar
• Zheng L and Song SH: ‘Antimony-induced embrittlement in welding heat-affected zones in a Cr–Mo low-alloy steel’, Philos. Mag. Lett., 2013, 93, 405–412.
   Web of Science ®Google Scholar
• Song SH, Zhuang H, Wu J, Weng LQ, Yuan ZX and Xi TH: ‘Dependence of ductile-to-brittle transition temperature on phosphorus grain boundary segregation for a 2·25Cr1Mo steel’, Mater. Sci. Eng. A, 2008, A486, 433–438.
   Google Scholar
• Chen XM, Song SH, Weng LQ and Wang K: ‘Combined hardening and non-hardening embrittlement of an interstitial free steel’, Mater. Lett., 2012, 67, (1), 107–109.
   Web of Science ®Google Scholar
• Chen XM, Song SH, Weng LQ, Liu SJ and Wang K: ‘Relation of ductile-to-brittle transition temperature to phosphorus grain boundary segregation for a Ti-stabilized interstitial free steel’, Mater. Sci. Eng. A, 2011, A528, 8299–8304.
   Google Scholar
• Li Y, Crowther DN, Green MJW, Mitchell PS and Baker TN: ‘The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels’, ISIJ Int., 2001, 41, (1), 46–55.
   Web of Science ®Google Scholar
• Zhang YQ, Zhang HQ, Li JF and Liu WM: ‘Effect of heat input on microstructure and toughness of coarse grain heat affected zone in Nb microalloyed HSLA steels’, J. Iron Steel Res. Int., 2009, 16, (5), 73–80.
   Web of Science ®Google Scholar
• Williams DB and Romig AD: ‘Studies of interfacial segregation in the analytical electron-microscope – a brief review’, Ultramicroscopy, 1989, 30, (1–2), 38–51.
   Web of Science ®Google Scholar
• Song SH and Weng LQ: ‘An FEGSTEM study of grain boundary segregation of phosphorus during quenching in a 2·25Cr–1Mo steel’, J. Mater. Sci. Technol., 2005, 21, 445–450.
   Web of Science ®Google Scholar
• Chen XM, Song SH, Weng LQ and Liu SJ: ‘Solute grain boundary segregation during high temperature plastic deformation in a Cr–Mo low alloy steel’, Mater. Sci. Eng. A, 2011, A528, (25–26), 7663–7668.
   Google Scholar
• Krauss G and Thompson SW: ‘Ferritic microstructures in continuously cooled low- and ultralow-carbon steels’, ISIJ Int., 1995, 35, (8), 937–945.
   Web of Science ®Google Scholar
• Kang JS, Seol J and Park CG: ‘Three-dimensional characterization of bainitic microstructures in low-carbon high-strength low-alloy steel studied by electron backscatter diffraction’, Mater. Charact., 2013, 79, 110–121.
   Web of Science ®Google Scholar
• Lan LY, Qiu CL, Zhao DW, Gao XH and Du LX: ‘Effect of reheat temperature on continuous cooling bainite transformation behavior in low carbon microalloyed steel’, J. Mater. Sci, 2013, 48, (12), 4356–4364.
   Web of Science ®Google Scholar
• Lee S, Kim BC and Kwon D: ‘Correlation of microstructure and fracture properties in weld heat-affected zones of thermomechanically controlled processed steels’, Metall. Trans. A, 1992, 23A, (10), 2803–2816.
   Google Scholar
• Mclean D: ‘Grain boundary in metals’; 1957, London, Oxford University Press.
   Google Scholar
• Xu TD and Cheng BY: ‘Kinetics of non-equilibrium grain-boundary segregation’, Prog. Mater. Sci., 2004, 49, (2), 109–208.
   Web of Science ®Google Scholar
• Aust K, Hanneman R, Niessen P and Westbrook J: ‘Solute induced hardening near grain boundaries in zone refined metals’, Acta Metall., 1968, 16, 291–302.
   Google Scholar
• Anthony TR: ‘Solute segregation in vacancy gradients generated by sintering and temperature changes’, Acta Metall., 1969, 17, (5), 603–609.
   Google Scholar
• Doig P and Flewitt PEJ: ‘Segregation of chromium to prior austenite boundaries during quenching of a 2·25%Cr1%Mo steel’, Acta Metall., 1981, 29, (11), 1831–1841.
   Google Scholar
• Williams TM, Stoneham AM and Harries DR: ‘The segregation of boron to grain boundaries in solution-treated Type 316 austenitic stainless steel’, Met. Sci., 1976, 10, (1), 14–19.
   Google Scholar
• Faulkner RG: ‘Non-equilibrium grain-boundary segregation in austenitic alloys’, J. Mater. Sci., 1981, 16, (2), 373–383.
   Web of Science ®Google Scholar
• Xu TD: ‘Non-equilibrium grain-boundary segregation kinetics’, J. Mater. Sci., 1987, 22, (1), 337–345.
   Web of Science ®Google Scholar
• Xu TD and Song SH: ‘A kinetic model of non-equilibrium grain-boundary segregation’, Acta Metall., 1989, 37, (9), 2499–2506.
   Google Scholar
• Ding RG, Rong TS and Knott JF: ‘Phosphorus segregation in 2·25Cr–1Mo steel’, Mater. Sci. Technol., 2005, 21, (1), 85–92.
   Web of Science ®Google Scholar
• Song SH and Weng LQ: ‘Diffusion of vacancy–solute complexes in alloys’, Mater. Sci. Technol., 2005, 21, (3), 305–310.
   Web of Science ®Google Scholar
• Gale WF and Totemeier TC: ‘Smithells metals reference book’, 8th edn; 2003, Oxford, Butterworth-Heinemann.
   Google Scholar
• Song SH, Wu J, Weng LQ and Yuan ZX: ‘Fractographic changes caused by phosphorus grain boundary segregation for a low alloy structural steel’, Mater. Sci. Eng. A, 2008, A497, (1–2), 524–527.
   Google Scholar
• Islam MA, Knott JF and Bowen P: ‘Critical level of intergranular fracture to affect the toughness of embrittled 2·25Cr–1 Mo steels’, J. Mater. Eng. Perform., 2004, 13, (5), 600–606.
   Web of Science ®Google Scholar