Thermal analysis and failure behaviour of YSZ thermal barrier coatings on low heat rejection diesel engine piston

References

• Jaichandar S and Tamilporai P: ‘Low heat rejection engines – an overview’, SAE Pap., 2003, 1, 1–17.
   Google Scholar
• Cerit M: ‘Thermo mechanical analysis of a partially ceramic coated piston used in an SI engine’, Surf. Coat. Technol., 2011, 205, 3499–3505.
   Web of Science ®Google Scholar
• Ramaswamy P, Seetharamu S, Varma KBR, Raman N and Rao KJ: ‘Thermomechanical fatigue characterization of zirconia (8%Y2O3-ZrO2) and mullite thermal barrier coatings on diesel engine components: effect of coatings on engine performance’, Proc. Inst. Mech. Eng., 2000, 214, 729–742.
   Web of Science ®Google Scholar
• Shibata M, Kuroda S, Murakami H, Ode M, Watanabe M and Sakamoto Y: ‘Comparison of microstructure and oxidation behavior of CoNiCrAlY bond coatings prepared by different thermal spray processes’, Mater. Trans., 2006, 47, 1638–1642.
   Web of Science ®Google Scholar
• Saad PSaad and Kamo L: ‘Thermal barrier coatings for high output turbo charged diesel engine’, SAE Pap., 2007, 1, (1442), 1–13.
   Google Scholar
• Echsler DRenusch and Schütze M: ‘Bond coat oxidation and its significance for life expectancy of thermal barrier coating systems’, Mater. Sci. Tech-Lond., 2004, 20, 307–318.
   Web of Science ®Google Scholar
• Cao XQ, Vassen R and Stoever D: ‘Ceramic materials for thermal barrier coatings’, J. Eur. Ceram. Soc., 2004, 24, 1–10.
   Web of Science ®Google Scholar
• Evans AG, Mumm DR, Hutchinson JW, Meier GH and Pettit FS: ‘Mechanisms controlling the durability of thermal barrier coatings’, Prog. Mater. Sci., 2001, 46, 505–553.
   Web of Science ®Google Scholar
• Khor KA and Gu YW: ‘Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings’, Mater. Sci. Eng. A, 2000, A277, 64–76.
   Web of Science ®Google Scholar
• Wang ZT and Tian RZ: ‘The process handbook of aluminum alloy (in Chinese)’, 1st edn, Chap. 2, ‘Brands, status and composition of aluminum alloy’, 190–191; 1988, Changsha, Central South University Press.
   Google Scholar
• Buyukkaya E: ‘Thermal analysis of functionally graded coating AlSi alloy and steel pistons’, Surf. Coat. Technol., 2008, 202, 3856–3865.
   Web of Science ®Google Scholar
• Cerit M, Ayhan V, Parlak A and Yasar H: ‘Thermal analysis of a partially ceramic coated piston: Effect on cold start HC emission in a spark ignition engine’, Appl. Therm. Eng., 2011, 31, 336–341.
   Web of Science ®Google Scholar
• Peter G: ‘Creep of metals at high temperatures’, 28; 1972, London, Mills and Ban.
   Google Scholar
• Zhan L, Li Y, Huang M and Zhang M: ‘Constitutive equation describing creep ageing of 2124 aluminum alloy (in Chinese)’, J. South China Univ. Technol., 2012, 40, 107–111.
   Google Scholar
• Xu XL, Zhan LH, Li YG and Huang MH: ‘Constitutive modelling and springback prediction for creep age forming of 2124 aluminium alloy’, Mater. Sci. Tech-Lond., 2013, 29, 1139–1143.
   Web of Science ®Google Scholar
• Guo HB, Kuroda S and Murakami H: ‘Microstructures and properties of plasma–sprayed segmented thermal barrier coatings’, J. Am. Ceram. Soc., 2006, 89, 1432–1439.
   Web of Science ®Google Scholar
• Guo HB, Murakami H and Kuroda S: ‘Effect of hollow spherical powder size distribution on porosity and segmentation cracks in thermal barrier coatings’, J. Am. Ceram. Soc., 2006, 89, 3797–3804.
   Web of Science ®Google Scholar
• Levy A and Macadam S: ‘The behavior of ceramic thermal barrier coatings on diesel engine combustion zone components’, Surf. Coat. Technol., 1987, 30, 51–61.
   Web of Science ®Google Scholar
• Okazaki M: ‘High-temperature strength of Ni-base superalloy coatings’, Sci. Technol. Adv. Mater., 2001, 2, 357–366.
   Web of Science ®Google Scholar
• Li Y, Li CJ, Yang GJ and Xing LK: ‘Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying’, Surf. Coat. Technol., 2010, 205, 2225–2233.
   Web of Science ®Google Scholar
• Zhang K, Wang QM, Sun C and Wang FH: ‘Preparation and oxidation behavior of NiCrAlYSi coating on a cobalt-base superalloy K40S’, Corros. Sci., 2008, 50, 1707–1715.
   Web of Science ®Google Scholar
• Guo MH, Wang QM, Gong J, Sun C and Wen LS: ‘Preparation and oxidation of a gradient NiCoCrAlYSiB coating deposited by a combined system of arc ion plating and magnetron sputtering’, Surf. Coat. Technol., 2006, 201, 1302–1308.
   Web of Science ®Google Scholar