References
- Lu K: Science, 2010, 328, 319–320.
- Williams JC and Starke EA: Acta Mater., 2003, 51, 5775–5799.
- Weinert K, Biermann D and Bergmann S: CIRP Ann. – Manuf. Technol., 2007, 56, 105–108.
- Krasnowski M and Kulik T: Intermetallics, 2010, 18, 47–50.
- Chawla N and Chawla KK: ‘Metal matrix composites’; 2006, New York, Springer Verlag.
- Chawla N and Ganesh VV: ‘Fatigue crack of SiC particle reinforced metal matrix composites’, Int. J. Fatigue, 2010, 32, 856–863.
- Williams JJ, Flom Z, Ameli AA, Chawla N, Xiao X and de Carlo F: ‘Damage evolution in SiC particle reinforced Al alloy matrix composites by X-ray synchrotron tomography’, Acta Mater., 2010, 58, 6194–6205.
- Chawla KK and Chawla N: ‘Metal–matrix composites, Kirk-Othmer Encyclopedia of Chemical Technology’; 2000, John Wiley & Sons.
- Kukula-Kurzyniec A, Dutkiewicz J, Goral A, Coddet C, Dembinski L and Perrière L: ‘Aluminium based composites strengthened with metallic amorphous phase or ceramic (Al2O3) particles’, Mater. Des., 2014, 59, 246–251.
- Zhang DL, Koch CC and Scattergood RO: ‘The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy,’ Mater. Sci. Eng. A, 2009, A516, 270–275.
- Montazeri A, Javadpour J, Khavandi A, Tcharkhtchi A and Mohajeri A: ‘Mechanical properties of multi-walled carbon nanotube/epoxy composites’, Mater. Des., 2010, 31, 4202–4208.
- Bhaduri A, Gopinathan V, Ramakrishnan P and Miodownik AP: ‘Processing and properties of SiC particulate reinforced Al6·2Zn2·5Mg1·7Cu alloy (7010) matrix composites prepared by mechanical alloying’, Mater. Sci. Eng. A, 1996, A221, 94–101.
- Sub ZQ, Zhang D and Li GG: ‘Evaluation of dry sliding wear behavior of silicon particles reinforced aluminum matrix composites’, Mater. Des., 2005, 26, 454–458.
- Dudina DV, Georgarakis K, Li Y, Aljerf M, LeMoulec A, Yavari AR and Inoue A: ‘A magnesium alloy matrix composite reinforced wit metallic glass’, Compos. Sci. Technol., 2009, 69, 2734–2736.
- Lee MH, Kim J.-H, Park JS, Kim JC, Kim WT and Kim DH: Scr. Mater., 2004, 50, 1367–1371.
- Scudino S, Liu G, Prashanth KG, Bartusch B, Surreddi KB and Murty BS: J. Eckert. Acta Mater. 2009, 57, 2029–2039.
- Yu P, Kim KB, Das J, Baier F, Xu W and Eckert J: Scr. Mater., 2006, 54, 1445–1450.
- Wang Z, Tan J, Scudino S, Sun BA, Qu RT, He J, Prashanth KG, Zhang WW, Li YY and Eckert J: ‘Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28·5Gd11Ag2·5 metallic glasses’, Adv. Powder Technol., 2014, 25, 635–639.
- Yu P, Kim KB, Das J, Baier F, Xu W and Eckert J: ‘Fabrication and mechanical properties of Ni-Nb metallic glass particle-reinforced Al-based metal matrix composite,’ Scr. Mater., 2006, 54, 1445–1450.
- Zheng R, Yang H, Liu T, Ameyama K and Ma C: ‘Microstructure and mechanical properties of aluminium alloy matrix composites reinforced with Fe-based metallic glass particles’, Mater. Des., 2014, 53, 512–518.
- Wang Z, Tan J, Sun BA, Scudino S, Prashanth KG, Zhang WW, Li YY and Eckert J: ‘Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles’, Mater. Sci. Eng. A, 2014, A600, 53–58.
- Wang Z, Prashanth KG, Scudino S, Chaubey AK, Sordelet DJ, Zhang WW, Li YY and Eckert J: ‘Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles’, J. Alloy Compd, 2014, 586, S419–S422.
- Marko D, Prashanth KG, Scudino S, Wang Z and Ellendt N: ‘Al-based metal matrix composites reinforced with Fe49·9Co35·1Nb7·7B4·5Si2·8 glassy powder: mechanical behavior under tensile loading’, J. Alloys Compd, 2014, 615, Supp 1, 5 December 2014.
- Inoue A, Hashimoto K (eds.): ‘Amorphous and nanocrystalline materilas: preparation, properties, and applications’, 1st edn; 2001, Berlin/Heidelberg, Springer-Verlag.
- Inoue A, Shen BL and Chang CT: Intermetallics, 2006, 14, 936–944.
- Babout L, Maire E and Fougères R: ‘Damage initiation in model metallic materials: X ray tomography and modeling’, Acta Mater., 2004, 52, 2475–2487.
- Babout L, Brechet Y, Maire E and Fougères R: ‘On the competition between particle fracture and particle decohesions in metal matrix composites’, Acta Mater., 2004, 52, 4517–4525.
- Pasko A, Ochin P, Nowak S and Champion Y: ‘Synthesis and characterization of amorphous Zr-based alloys with Ta and W additions’, J. Alloys Compd, 2009, 483, 120–124.
- Nowak S, Ochin P, Pasko A and Maciejak O: ‘Nanoindentation analysis of the mechanical behavior of Zr-bases metallic glasses with Sn, Ta and W addidtions’, J. Alloys Compd, 2009, 483, 139–142.
- Perrière L and Champion Y: ‘Phases distribution dependent strength in metallic glass–aluminum composites prepared by spark plasma sintering’, Mater. Sci. Eng. A, 2012, A548, 112–117.
- Nowak S, Perrière L, Dembinski L, Tusseau-Nenez S and Champion Y: ‘Approach of the spark plasma sintering mechanism in Zr57Cu20Al10Ni8Ti5 metallic glass’, J. Alloys Compd, 2011, 509, (3), 1011–1019.
- Perrière L, Thai MT, Tusseau-Nemez S, Blétry M and Champion Y: ‘Spark plasma sintering of a Zr-based metallic glass’, Adv. Eng. Mater., 2011, 13, (7), 581–586.
- Xing LQ, Ochin P, Harmelin M, Faudot F, Bigot J and Chevalier JP: ‘Cast bulk Zr-Ti-Al-Cu-Ni amorphous alloys’, Mater. Sci. Eng. A, 1996, A220, 155–161.
- Salvo L, Suéry M, Marmottant A, Limodin N and Bernard D: ‘3D imaging in material science: application of X-ray tomography’, Comptes Rendus Phys., 2010, 11, (9–10), 641–649.
- Babout L, Maire E, Buffière JY and Fougères R: ‘Characterization by X-ray computed tomography of decohesions, porosity growth and coalescence in model metal matrix composites’, Acta Mater., 2001, 49, 2055–2063.
- Maire E, Morgeneyer T, Landron C, Adrien J and Helfen L: ‘Bulk evaluation of ductile damage development using high resolution tomography and laminography’, C. R. Phys., 2012, 13, 328–336.
- Buffière J.-Y, Maire E, Cloetens P, Lormand G and Fougères R: ‘Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography’, Acta Mater., 1999, 47, 1613–1625.
- Buffière J.-Y, Maire E, Adrien J, Masse J.-P and Boller E: ‘In situ experiments with X ray tomography: an attractive tool for experimental mechanics’, Exper. Mech., 2010, 50, 289–305.
- Maire E, Carmona V, Courbon J and Ludwig W: Acta Mater., 2007, 6806–6815.
- Beremin FM: ‘Cavity formation from inclusions in ductile fracture of A508 steel’, Metall. Trans. A, 1981, 12A, (5), 723–731.
- Maire E, Bordreuil C, Babout L and Boyer J.-C: ‘Damage initiation and growth in metals. Comparison between modeling and tomography experiments’, J. Mech. Phys. Solids, 2005, 53, 2411–2434.