Ferrite recrystallisation and characteristics of non-recrystallised ferrite grains in Ti added low carbon steels

References

• Matsudo K, Shimomura T and Nozoe O: ‘Effect of carbide size, cold reduction and heating rate in annealing on deep-drawability of low-carbon, capped cold-rolled steel sheet’, Text. Crystall. Solids, 1978, 3, 53–72.
   Google Scholar
• Garcia CI, Cho K, Gong Y, Chen TR and Deardo AJ: ‘Development of high strength, low-carbon, Nb-bearing dual-phase steels for production on continuous galvanizing lines’, Mater. Sci. Technol. 2005, 2, 77–86.
   Google Scholar
• Hayami S, Furukawa T, Gondoh H and Takachi H: ‘Formable HSLA and dual-phase steels’, in Formable HSLA and Dual-Phase Steels, 167; 1979, New York, AIME.
   Google Scholar
• Goodman SR: ‘Metallurgy of high-strength cold-rolled steel sheets’, Conf. Proc. Int. Conf. on ‘Technology and applications of HSLA steels’, 1984, 239–252, OH, ASM.
   Google Scholar
• Michalak JT and Hibbard WR: ‘Effect of rolling procedure on the kinetics of recrystallization of cold-rolled iron’, Trans. ASM, 1961, 53, 331–348.
   Google Scholar
• Venturello G, Antonione C and Bonaccorso F: ‘Influence of small amounts of carbon on recovery and recrystallization of high-purity iron’, Trans. Metal. Soc. AIME, 1963, 227, 1433–1439.
   Google Scholar
• Rosen A, Burton MS and Smith GV: ‘Recrystallization of high-purity iron’, Trans. Metal. Soc. AIME, 1964, 230, 205–215.
   Google Scholar
• Antonione C, Gatta GD, Lucci A, Riontino G and Venturello G: ‘The role of substitutional transition elements on recrystallization processes in dilute iron solid solutions’, Acta Metal., 1970, 18, 1169–1180.
   Google Scholar
• Mukunthan K and Hawbolt EB: ‘Modeling recovery and recrystallization kinetics in cold-rolled Ti-Nb stabilized interstitial-free steel’, Metal. Mater. Trans. A, 1996, 27A, 3410–3423.
   Web of Science ®Google Scholar
• Hayakawa Y. and Szpunar J.A.; ‘A comprehensive model of recrystallization for interstitial free steel’, Acta Mater., 1997, 45, 3721–3730.
   Web of Science ®Google Scholar
• Suehiro M: ‘An analysis of the solute drag effect of Nb on recrystallization of ultra low carbon steel’, ISIJ Int., 1998, 38, 547–552.
   Web of Science ®Google Scholar
• Ye W, Gall RL and Saindrenan G: ‘A study of the recrystallization of an IF steel by kinetics models’, Mater. Sci. Eng. A, 2002, A332, 41–46.
   Google Scholar
• Petitgand H, Regle H and Zimmermann U: ‘Recrystallisation and grain growth in batch annealed Ti-IF steels’, Mater. Sci. Forum, 2004, 467–470, 1099–1104.
   Google Scholar
• Maruyama N and Smith GDW: ‘Quantitative analysis on the solute drag effect of Nb and Mo during primary recrystallization of α-Fe’, Nippon Steel Techn. Rep., 2005, 91, 34–37.
   Google Scholar
• Kestens L and Jonas JJ: ‘Modelling texture change during the static recrystallization of a cold rolled and annealed ultra low carbon steel previously warm rolled in the ferrite region’, ISIJ Int., 1997, 37, 807–814.
   Web of Science ®Google Scholar
• Hashimoto N, Yoshinaga N and Senuma T: ‘Texture evolution of IF steel due to recrystallization’, ISIJ Int., 1998, 38, 617–624.
   Web of Science ®Google Scholar
• Samet-Meziou A, Etter AL, Baudin T and Penelle R: ‘Recovery and recrystallization study after low deformation amount by cold rolling in an IF-Ti steel’, Mater. Sci. Forum, 2004, 467–470, 183–188.
   Google Scholar
• Choi S.-H and Cho JH: ‘Primary recrystallization modelling for interstitial-free steels’, Mater. Sci. Eng. A, 2005, A405, 86–101.
   Google Scholar
• Samet-Meziou A, Etter AL, Baudin T and Penelle R: ‘TEM study of recovery and recrystallization mechanisms after 40% cold rolling in an IF-Ti steel’, Scr. Mater., 2005, 53, 1001–1006.
   Web of Science ®Google Scholar
• Sugiura N., Yoshinaga N., Kawasaki K., Yamaguchi Y., Takahashi J. and Yamada T., ‘Influence of solute C on recrystallization behavior in Ti added low carbon cold rolled sheet steel’, Tetsu-to-Hagané, 2008, 94, 179–187.
   Web of Science ®Google Scholar
• Ogawa T, Sugiura N, Maruyama N and Yoshinaga N: ‘Influence of state of Nb on recrystallization temperature during annealing in cold-rolled low-carbon steels’, Mater. Sci. Eng. A, 2013, A564, 42–45.
   Google Scholar
• Takahashi M: ‘Ultrahigh strength cold rolled steel sheet’, Tetsu-to-Hagané, 1982, 68, 1348–1354.
   Google Scholar
• Osawa K, Suzuki T, Matsudo K and Kurihara K: ‘Effects of carbon and manganese on the deep-drawability of cold-rolled steel sheets’, Tetsu-to-Hagané, 1986, 72, 1728–1735.
   Web of Science ®Google Scholar
• Suzuki T: ‘Influence of solute atoms in solution and precipitates on the recrystallization in iron and low-carbon steels’, Tetsu-to-Hagané, 1984, 70, 1888–1897.
   Web of Science ®Google Scholar
• Okamoto A: ‘Effects of carbon on the recrystallization texture of cold rolled sheet steel’, Tetsu-to-Hagané, 1984, 70, 1906–1913.
   Web of Science ®Google Scholar
• Inagaki H: ‘Fundamental aspect of texture formation in low carbon steel’, ISIJ Int., 1994, 34, 313–321.
   Web of Science ®Google Scholar
• Orowan E: ‘Dislocation in metals’, 131; 1954, New York, AIME.
   Google Scholar
• Gerald V and Haberkorn H: ‘On the critical resolved shear stress of solid solutions containing coherent precipitates’, Phys. Stat. Sol., 1966, 16, 675–684.
   Web of Science ®Google Scholar