References
- Panait CG, Bendick W, Fuchsmann A, Gourgues-Lorenzon AF and Besson J: ‘Study of the microstructure of the Grade 91 steel after more than 100000 h of creep exposure at 600°C’, Int. J. Press. Vessel. Pip., 2010, 87, 326–335.
- Hald J: ‘Creep strength and ductility of 9 to 12% chromium steels’, Mater. High Temp., 2004, 21, (1), 41–46.
- Danielsen H and Hald J: ‘A thermodynamic model of the Z-phase Cr(V,Nb)N’, Calphad, 2007, 31, 505–514.
- Danielsen HK and Hald J: ‘Behaviour of Z phase in 9–12%Cr steels’, Energy Mater., 2006, 1, 49–57.
- Yao HT, Xuan FZ, Wang Z and Tu ST: ‘A review of creep analysis and design under multi-axial stress states’, Nucl. Eng. Des., 2007, 237, 1969–1986.
- Kassner ME and Hayes TA: ‘Creep cavitation in metals’, Int. J. Plast., 2003, 19, 1715–1748.
- Perry AJ: ‘Review cavitation in creep’, J. Mater. Sci., 1974, 9, 1016–1039.
- Sklenicka V, Kucharova K, Svoboda M, Kloc L, Bursik J and Kroupa A: ‘Long-term creep behavior of 9–12%Cr power plant steels’, Mater. Charact., 2003, 51, 35–48.
- Yadav SD, Rosc J, Sartory B, Brunner R, Sonderegger B, Sommitsch C and Poletti C: ‘Investigation of pre-existing pores in creep loaded 9Cr steel’, Proc. Conf. 2nd Int. Congress on ‘3D Materials science’, Annecy, France, 2014, TMS (The Minerals, Metals & Materials Society), 85–90.
- Lee JS, Armaki HG, Maruyama K, Muraki T and Asahi H: ‘Causes of breakdown of creep strength in 9Cr-1·8W-0·5Mo-VNb steel’, Mater. Sci. Eng. A, 2006, A428, 270–275.
- Sket F, Dzieciol K, Borbély A, Kaysser-Pyzalla AR, Maile K and Scheck R: ‘Microtomographic investigation of damage in E911 steel after long term creep’, Mater. Sci. Eng. A, 2010, A528, 103–111.
- Gupta C, Toda H, Schlacher C, Adachi Y, Mayr P, Sommitsch C, Uesugi K, Suzuki Y, Takeuchi A and Kobayashi M: ‘Study of creep cavitation behavior in tempered martensitic steel using synchrotron micro-tomography and serial sectioning techniques’, Mater. Sci. Eng. A, 2013, A564, 525–538.
- Toda H, Maire E, Yamauchi S, Tsuruta H, Hiramatsu T and Kobayashi M: ‘In situ observation of ductile fracture using X-ray tomography technique’, Act. Mater., 2011, 59, 1995–2008.
- Xu W, Ferry M, Mateescu N, Cairney JM and Humphreys FJ: ‘Techniques for generating 3-D EBSD microstructures by FIB tomography’, Mater. Charact., 2007, 58, 961–967.
- Poletti C, Requena G, Tolnai D, Cloetens P and Steiger-Thirsfeld A: ‘Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1 wt.% B’, Int. J. Mat. Res., 2007, 55, 3875–3882.
- Lasagni F, Lasagni A, Marks E, Holzapfel C, Mücklich F and Degischer HP: ‘Three-dimensional characterization of ‘as-cast’ and solution-treated AlSi12(Sr) alloys by high-resolution FIB tomography’, Act. Mater., 2010, 101, 1151–1157.
- Ragab AR: ‘Creep rupture due to material damage by cavitation’, J. Eng. Mater. Technol., 2002, 124, 199–205.
- Dimmler G, Schalk W, Weinert P, Gruber H, Wieser S and Cerjak H: ‘Sample preparation for high-resolution damage examinations in SEM’, Prak. Metallogr., 2002, 39, 619–633.
- http://imagej.nih.gov/ij/download.html
- Viveta N, Chupina S, Estradea E, Richardb A, Bonnamyc S, Rochaisa D and Brunetona E: ‘Effect of Ni content in SOFC Ni-YSZ cermets: A three-dimensional study by FIB-SEM tomography’, J. Power Sources, 2011, 196, 9989–9997.
- Underwood EE: ‘Quantitative stereology’, 2nd edn, 109–113; 1970, Reading, MA, Addison-Wesley Publishing Company.
- Schwartz HA: ‘The metallographic determination of the size distribution of temper carbon nodules’, Met. Alloy., 1934, 5, (6), 139–140.
- Saltykov SA: ‘Stereometric metallography’, 2nd edn; 1958, Moscow, Metallurgizdat.
- Kloc L and Sklenicka V: ‘Transition from power-law to viscous creep behaviour of P-91’, Mater. Sci. Eng., 1997, A234–A236, 962–965.
- Choudhary BK: ‘Tertiary creep behaviour of 9Cr–1Mo ferritic steel’, Mater. Sci. Eng. A, 2013, A585, 1–9.
- Naoi H, Ohgami M, Kiu X and Fujita T: ‘Effect of aluminum content on the mechanical properties of a 9Cr-0·5Mo-1·8W steel’, Metall. Mater. Trans. A, 1997, 28A, 1195–1203.
- Hull D and Rimmer DE: ‘The growth of grain-boundary voids under stress’, Philos. Mag., 1959, 4, (42), 673–687.