References
- Evans RW and Wilshire B: ‘Creep of metals and alloys’; 1985, London, Institute of Metals.
- ‘R5 assessment procedure for the high temperature response of structures’, Issue 3, Revision 001, EDF Energy Nuclear Generation Ltd, 2012.
- Gupta C, Toda H, Mayr P and Sommitsch C: ‘The 3D nature of creep cavitation and its implications for residual life estimation methods in heat resistant steels: a critical review’, Mater. Sci. Technol., to be published.
- Turski M, Bouchard PJ, Steuwer A and Withers PJ: ‘Residual stress driven creep cracking in type 316 stainless steel’, Acta Mater., 2008, 56, 3598–3612.
- Lundin CD, Liu P and Cui Y: ‘A literature review on characteristics of high temperature ferritic Cr–Mo steels and weldments’; 2000, New York, Welding Research Council.
- O’Donnell MP, Bradford RAW, Dean DW, Hamm CD and Chevalier M: ‘Structural integrity of nuclear power plant: high temperature issues in advanced gas cooled reactors (AGR)’, 1; 2013, Abington, EMAS Publishing.
- Coleman MC, Miller DA and Stevens RA: ‘Reheat cracking and strategies to assure integrity of type 316 weld components’, Proc. Int. Conf. on ‘Integrity of high temperature welds’, PEP Ltd, London, UK, 1998, 169–179.
- Hales R: ‘Method of creep damage summation based on accumulated strain for the assessment of creep-fatigue endurance’, Fatigue Fract. Eng. Mater. Struct., 1983, 6, 121–135.
- Spindler MW: Fatigue Fract. Eng. Mater. Struct., 2004, 27, 273–281.
- Yu J, Lin X, Wang J, Chen J and Huang W: ‘First-principles study of the relaxation and energy of bcc-Fe, fcc-Fe and AISI-304 stainless steel surfaces’, Appl. Surf. Sci., 2009, 255, 9032–9039.
- Jazaeri H, Bouchard PJ, Hutchings MT and Lindner P: ‘Study of creep cavitation in stainless steel weldment’, Mater. Sci. Technol., 2014, 30, 38–42.
- Bouchard PJ, Withers PJ, McDonald SA and Heenan RK: ‘Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel’, Acta Mater., 2004, 52, 23–34.
- Jazaeri H, Bouchard PJ, Hutchings M, Mamun AA and Heenan RK: ‘Application of small angle neutron scattering to study creep cavitation in stainless steel weldments’, Mater. Sci. Technol., 2015, 31, 535–539.
- Maire E and Withers PJ: ‘Quantitative X-ray tomography’, Int. Mater. Rev., 2014, 59, 1, 1–43.
- Pyzalla A, Camin B, Buslaps T, Di Michiel M, Kaminski H, Kottar A, Pernack A and Reimers W: ‘Simultaneous tomography and diffraction analysis of creep damage’, Science, 2005, 308, 5718, 92–95.
- Gupta C, Toda H, Schlacher C, Adachi Y, Mayr P, Sommitsch C, Uesugi K, Suzuki Y, Takeuchi A and Kobayashi M: ‘Study of creep cavitation behaviour in tempered martensitic steel using synchrotron micro-tomography and serial sectioning techniques’, Mater. Sci. Eng. A, 2013, A564, 525–538.
- Sket F, Isaac A, Dzieciol K, Sauthoff G, Borbély A and Pyzalla AR: ‘In situ tomographic investigation of brass during high-temperature creep’, Scr. Mater., 2008, 59, 558–561.
- Isaac A, Sket F, Reimers W, Camin B, Sauthoff G and Pyzalla AR: ‘In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography’, Mater. Sci. Eng. A, 2008, A478, 108–118.
- Kyrieleis A, Titarenko V, Ibison M, Connelly T and Withers PJ: ‘Region-of-interest tomography using filtered back-projection: assessing the practical limits’, J. Microsc., 2011, 241, 69–82.
- Chen B, Flewitt PEJ, Smith DJ and Jones CP: ‘An improved method to identify grain boundary creep cavitation in 316H austenitic stainless steel’, Ultramicroscopy, 2011, 111, 309–313.
- Burnett TL et al.: ‘Correlative tomography’, Sci. Rep., 2014, 4, 4711.
- Jazaeri H, Chong BK, Bouchard PJ, Rao A and James JA: ‘Characterization of creep damage in a type 316H stainless steel weldment using synchrotron X-ray tomography and microscopic examination’, Metall. Mater. Trans. A, to be published.
- Groeber MA, Haley BK, Uchic MD, Dimiduk DM and Ghosh S: ‘3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system’, Mater. Charact., 2006, 57, 259–273.
- Lai JKL: ’A review of precipitation behaviour in AISI type 316 stainless steel’, Mater. Sci. Eng., 1983, 61, 101–109.
- Weiss B and Stickler R: ‘Phase instabilities during high temperature exposure of 316 austenitic stainless steel’, Metall. Mater. Trans. B, 1972, 3B, (4), 851–866.
- Lai JKL: ‘A study of precipitation in AISI type 316 stainless steel’, Mater. Sci. Eng., 1983, 58, (2), 195–209
- Sourmail T: ‘Precipitation in creep resistant austenitic stainless steels’, Mater. Sci. Technol., 2001, 17, 1–14.
- Smith JJ and Farrar RA: ‘Influence of microstructure and composition on mechanical properties of some AISI 300 series weld metals’, Int. Mater. Rev., 1993, 38, 25–51.
- Minami Y, Kimura H and Ihara Y: ‘Microstructural changes in austenitic stainless steels during long-term aging’, Mater. Sci. Technol., 1986, 2, 795–806.
- Hutchings MT: ‘The use of small angle neutron scattering for mapping creep cavitation damage in an ex-service steam header’, OU/MatsEng/025, The Open University, 2012, 1–26.
- Powell DJ, Pilkington R and Miller DA: ‘The precipitation characteristics of 20% Cr/25% Ni–Nb stabilised stainless steel’, Acta Metall., 1988, 36, (3), 713–724.
- Taplin DMR and Wingrove AL: ‘Study of intergranular cavitation in iron by electron microscopy of fracture surfaces’, Acta Metall., 1967, 15, (7), 1231–1236.
- Link T, Zabler S, Epishin A, Haibel A, Bansal M and Thibault X: ‘Synchrotron tomography of porosity in single-crystal nickel-base superalloys’, Mater. Sci. Eng. A, 2006, A425, (1–2), 47–54.
- Dzieciol K, Borbély A Sket F, Isaac A, Di Michiel M, Cloetens P, Buslaps T and Pyzalla AR.: ‘Void growth in copper during high-temperature power-law creep’, Acta Mater., 2011, 59, (2), 671–677.
- Isaac A Sket F, Reimers W, Camin B, Sauthoff G and Pyzalla AR.: ‘In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography’, Mater. Sci. Eng. A, 2008, A478, (1–2), 108–118.
- Vöse M, Fedelich B and Owen J: ‘A simplified model for creep induced grain boundary cavitation validated by multiple cavity growth simulations’, Comput. Mater. Sci., 2012 58, 201–213.
- Spindler M., private communication.
- Rustichelli F: ‘Applications of small neutron scattering in material science and technology’, Metall. Sci. Technol., 1993, 11, 118–141.
- Beckitt FR and Clark BR: ‘The shape and mechanism of formation of M23C6 carbide in austenite’, Acta Metall., 1967, 15, (1), 113–129.
- Lewis MH and Hattersley B: ‘Precipitation of M23C6 in austenitic steels’, Acta Metall., 1965, 13, (11), 1159–1168.
- Warren A.D., Flewitt P.E.J. and Scott T.B., private communication.
- Hull FC: ‘Effect of delta ferrite on the hot cracking of stainless steel’, Weld. J., 1967, 46, (9), 399-s–409-s.
- Lippold JC and Savage WF: ‘Solidification of austenitic stainless steel weldments. Part III: the effect of solidification behavior on hot cracking susceptibility’, Weld. Res. Suppl., 1982, 1, 388–396s.
- Sasikala G, Ray SK and Mannan SL: ‘Kinetics of transformation of delta ferrite during creep in a type 316(N) stainless steel weld metal’, Mater. Eng. A, 2003, A359, 86–90.
- Mathew MD, Sasikala G, Mannan SL and Rodriguez P: ‘Transformation of ferrite in type 316 stainless steel weld metal during creep deformation’, Mater. Sci. Technol., 1991, 7, 533–535.
- Mathew MD, Sasikala G, Mannan SL and Rodriguez P: ‘Effect of stress on the transformation behaviour of delta-ferrite in type 316 stainless steel weld metal’, J. Mater. Sci. Lett., 1994, 13, 194–196.
- Gill TPS, Vijayalakshmi M, Gnanamoorthy JB and Padmanabhan KA: ‘Transformation of delta-ferrite during the postweld heat treatment of type 316L stainless steel weld metal’, Weld. Res. Suppl., 1986, 123-s.
- Stewart DA and Spellward P: ‘Transmission electron microscopy investigation of materials originating from Heysham 1 Header 2D22’, M/TE/EXT/REP/0163/00.
- Singhal LK and Martin JW: ‘The formation of ferrite and sigma-phase in some austenitic stainless steels’, Acta Metall., 1968, 16, 1441–1451.
- Morris D: ‘The influence of sigma phase on creep ductility in type 316 stainless steel’, Scr. Metall., 1979, 13, (12), 1195–1196.
- Barcik J: ‘Mechanism of sigma-phase precipitation in Cr–Ni stainless steels’, Mater. Sci. Technol., 1988, 4, (1), 5–15.
- Hsieh CC and Wu W: ‘Overview of intermetallic sigma (σ) phase precipitation in stainless steels’, ISRN Metall., 2012. DOI: 10.5402/2012/732471.
- Wahab AA et al.: ‘A three-dimensional characterization of creep void formation in hydrogen reformer tubes’, Scr. Mater., 2006, 55, (1), 69–73.
- Wahab AA and Kral MV: ‘3D analysis of creep voids in hydrogen reformer tubes’, Mater. Sci. Eng. A, 2005, A412, (1–2), 222–229.
- Hong HU and Nam SW: ‘Improvement of creep-fatigue life by the modification of carbide characteristics through grain boundary serration in an AISI 304 stainless steel’, J. Mater. Sci., 2003, 38, (7), 1535–1542.
- Segurado J and Llorca J: ‘Discrete dislocation dynamics analysis of the effect of lattice orientation on void growth in single crystals’, Int. J. Plast., 2010, 26, (6), 806–819.
- Sarma GB and Radhakrishnan B: ‘Modeling the effect of microstructural features on the nucleation of creep cavities’, Mater. Sci. Eng. A, 2008, A494, 92–102.
- Li D and Shinozaki K: ‘Simulation of role of precipitate in creep void occurrence in heat affected zone of high Cr ferritic heat resistant steels’, Sci. Technol. Weld. Join., 2005, 10, (5), 544.