Material flow during friction stir spot welding of dissimilar Al2024/Al materials

References

• Nandan R, DebRoy T and Bhadeshia HKDH: Prog. Mater. Sci., 2008, 53, 980–1023.
   Web of Science ®Google Scholar
• Cam G: ‘Friction stir welded structural materials: beyond Al-alloys’, Int. Mater. Rev., 2011, 56, 1–48.
   Web of Science ®Google Scholar
• Cam G and Mistikoglu S: ‘Recent developments in friction stir welding of Al-Alloys’, J. Mater. Eng. Perform., 2014, 23, 1936–1953.
   Web of Science ®Google Scholar
• Bozkurt Y, Salman S and Cam G: ‘The effect of welding parameters on lap-shear tensile properties of dissimilar friction stir spot welded AA5754-H22/2024-T3 joints’, Sci. Technol. Weld. Joining, 2013, 18, 337–345.
   Web of Science ®Google Scholar
• Ipekoglu G and Cam G: ‘Effect of initial temper condition and postweld heat treatment on the properties of dissimilar friction-stir-welded joints between AA7075 and AA6061 aluminium alloys’, Metall. Mater. Trans. A, 2014, 45A, 3074–3087.
   Web of Science ®Google Scholar
• Fratini L, Buffa G, Palmeri D, Hua J and Shivpuri R: ‘Material flow in FSW of AA7075-T6 butt joints: numerical simulations and experimental verifications’, Sci. Technol. Weld. Joining, 2006, 11, 412–421.
   Web of Science ®Google Scholar
• Nandan R, Roy GG, Lienert TJ and Debroy T: ‘Three-dimensional heat and material flow during friction stir welding of mild steel’, Acta Mater., 2007, 55, 883–895.
   Web of Science ®Google Scholar
• Coelho RS, Kostka A, Santos JF and Pyzalla AR: ‘EBSD technique visualization of material flow in aluminum to steel friction-stir dissimilar welding’, Adv. Eng. Mater., 2008, 10, 1127–1133.
   Web of Science ®Google Scholar
• Mishra RS and Ma ZY: ‘Friction stir welding and processing’, Mater. Sci. Eng. R, 2005, R50, 1–78.
   Web of Science ®Google Scholar
• Nandan R, Debroy T and Bhadeshia HKDH: ‘Recent advances in friction-stir welding – process, weldment structure and properties’, Prog. Mater. Sci., 2008, 53, 980–1023.
   Web of Science ®Google Scholar
• Horie S, Shinozaki K, Yamamoto M and North TH: ‘Experimental investigation of material flow during friction stir spot welding’, Sci. Technol. Weld. Joining, 2010, 15, 666–670.
   Web of Science ®Google Scholar
• Colligan K: ‘Friction stir welding demonstrated for combat vehicle construction’, Weld. J., 1999, 82, 229s–237s.
   Google Scholar
• Su P, Gerlich A, North TH and Bendzsak GJ: ‘Intermixing in dissimilar friction stir spot welds’, Metall. Mater. Trans. A, 2007, 38A, 584–595.
   Web of Science ®Google Scholar
• Gerlich A, Su P, Yamamoto M and North TH: ‘Material flow and intermixing during dissimilar friction stir welding’, Sci. Technol. Weld. Joining, 2008, 13, 254–264.
   Web of Science ®Google Scholar
• Su P, Gerlich A, North TH and Bendzsak GJ: ‘Material flow during friction stir spot welding’, Sci. Technol. Weld. Joining, 2006, 11, 61–71.
   Web of Science ®Google Scholar
• Shibayanagi T, Gerlich A, Kashihara K and North TH: ‘Textures in single-crystal aluminum friction stir spot welds’, Metall. Mater. Trans. A, 2009, 40A, 920–931.
   Web of Science ®Google Scholar
• Higashiyama M, Shinoda T and Takegami H: ‘Visualization of material flow phenomenon during friction stir welding’, J. Jpn Inst. Light Met., 2006, 56, 533–537.
   Google Scholar
• Hirasawa S, Badarinarayan H, Okamoto K, Tomimura T and Kawanami T: ‘Analysis of effect of tool geometry on plastic flow during friction stir spot welding using particle method’, J. Mater. Process. Technol., 2010, 210, 1455–1463.
   Web of Science ®Google Scholar
• Xue P, Ni DR, Wang D, Xiao BL and Ma ZY: ‘Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints’, Mater. Sci. Eng. A, 2011, A528, 4683–4689.
   Web of Science ®Google Scholar
• Firouzdor V and Kou S: ‘Al-to-Mg friction stir welding: effect of material position, travel speed, and rotation speed’, Metall. Mater. Trans. A, 2010, 41A, 2914–2935.
   Web of Science ®Google Scholar
• Su P, Gerlich A, North TH and Bendzsak GJ: ‘Energy utilisation and generation during friction stir spot welding’, Sci. Technol. Weld. Joining, 2006, 11, 163–169.
   Web of Science ®Google Scholar
• Gerlich A, Su P and North TH: ‘Peak temperatures and microstructures in aluminium and magnesium alloy friction stir spot welds’, Sci. Technol. Weld. Joining, 2005, 10, 647–652.
   Web of Science ®Google Scholar
• Gilbert Kaufman J: ‘Properties of aluminum alloys. Tensile, creep, and fatigue data at high and low temperatures’, 2006. Materials Park, OH, ASM, The Aluminum Association.
   Google Scholar
• Ueno S: ‘Microstructure evaluation and temperature distribution during friction stir spot welding of pure aluminum’, BS thesis, Osaka University, Osaka, Japan, 2011.
   Google Scholar