345
Views
11
CrossRef citations to date
0
Altmetric
Research Papers

Experimental investigation of pulse current on mechanical behaviour of AZ31 alloy

, , , &
Pages 1131-1138 | Received 08 Aug 2014, Accepted 22 Sep 2014, Published online: 07 Oct 2014

References

  • Troitski OA and Likhtman VI: ‘Anisotropy of the effect of electron-beam and α-irradiation on the deformation process of zinc single crystals in the brittle state’, Dokl. Akad. Nauk. SSSR, 1963, 148, (2), 332–334.
  • Kim W, Yeom K.-H, Thien NT, Hong S.-T, Min B.-K, Oh SI, Kim M.-J, Han HN and Lee H.-W: ‘Electrically assisted blanking using the electroplasticity of ultra-high strength metal alloys’, CIRP Ann. – Manuf. Technol., 2014, 63, (1), 273–276.
  • Xu Z, Tang G, Tian S, Ding F and Tian H: ‘Research of electroplastic rolling of AZ31 Mg alloy strip’, J. Mater. Process. Technol., 2007, 182, (1–3), 128–133.
  • Liu J and Zhang K: ‘Promotion mechanism of electric current on SiCp/Al composite material deformation’, Mater. Sci. Technol., 2014, doi:1743284714Y.1743284000.
  • Zhu RF, Tang GY, Shi SQ and Fu MW: ‘Effect of electroplastic rolling on the ductility and superelasticity of TiNi shape memory alloy’, Mater. Des., 2013, 44, 606–611.
  • Stolyarov VV: ‘Deformability and nanostructuring of TiNi shape-memory alloys during electroplastic rolling’, Mater. Sci. Eng. A, 2009, A503, (1–2), 18–20.
  • Li C, Zhang KF, Jiang SS and Zhao ZP: ‘Pulse current auxiliary bulging and deformation mechanism of AZ31 magnesium alloy’, Mater. Des., 2012, 34, 170–178.
  • Li XB, Lu FG, Cui HC and Tang XH: ‘Effect of electric current pulse on flow behaviour of Al melt in parallel electrode process’, Mater. Sci. Technol., 2013, 29, (2), 226–233.
  • Zhang XF, Lu WJ and Qin RS: ‘Removal of MnS inclusions in molten steel using electropulsing’, Scr. Mater., 2013, 69, (6), 453–456.
  • Qin RS, Rahnama A, Lu WJ, Zhang XF and Elliott-Bowman B: ‘Electropulsed steels’, Mater. Sci. Technol., 2014, 30, (9), 1040–1044.
  • Conrad H: ‘Thermally activated plastic flow of metals and ceramics with an electric field or current’, Mater. Sci. Eng. A, 2002, A322, 100–107.
  • Molotskii M and Fleurov V: ‘Magnetic effects in electroplasticity of metals’, Phys. Rev. B, 1995, 52B, (22), 15829–15834.
  • Song H and Wang Z: ‘Effect of electropulsing on dislocation mobility of titanium sheet’, Trans. Nonferrous Met. Soc., 2012, 22, (7), 1599–1605.
  • Dzialo CM, Siopis MS, Kinsey BL and Weinmann KJ: ‘Effect of current density and zinc content during electrical-assisted forming of copper alloys’, CIRP Ann. – Manuf. Technol., 2010, 59, (1), 299–302.
  • Conrad H: ‘Effects of electric current on solid state phase transformation in metals’, Mater. Sci. Eng. A, 2000, A287, (2), 227–237.
  • Jiang Y, Tang G, Shek C, Zhu Y and Xu Z: ‘On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy’, Acta Mater., 2009, 57, (16), 4797–4808.
  • Qin RS: ‘Outstanding issues in electropulsing processing’, Mater. Sci. Technol., 2014, doi:1743284714Y.1743284000.
  • Xu Q, Guan L, Jiang Y, Tang G and Wang S: ‘Improved plasticity of Mg–Al–Zn alloy by electropulsing tension’, Mater. Lett., 2010, 64, (9), 1085–1087.
  • Jiang Y, Tang G, Shek C, Zhu Y, Guan L, Wang S and Xu Z: ‘Improved ductility of aged Mg–9Al–1Zn alloy strip by electropulsing treatment’, J. Mater. Res., 2011, 24, (05), 1810–1814.
  • Zhu RF, Tang GY, Shi SQ and Fu MW: ‘Microstructure evolution of copper strips with gradient temperature in electropulsing treatment’, J. Alloys Compd, 2013, 581, 160–165.
  • Kim M.-J, Lee K, Oh KH, Choi I.-S, Yu H.-H, Hong S.-T and Han HN: ‘Electric current-induced annealing during uniaxial tension of aluminum alloy’, Scr. Mater., 2014, 75, 58–61.
  • Jiang Y, Tang G, Shek C and Zhu Y: ‘Effect of electropulsing treatment on microstructure and tensile fracture behavior of aged Mg–9Al–1Zn alloy strip’, Appl. Phys. A, 2009, 97A, (3), 607–615.
  • Guan L, Tang G, Jiang Y and Chu PK: ‘Texture evolution in cold-rolled AZ31 magnesium alloy during electropulsing treatment’, J. Alloys Compd, 2009, 487, (1–2), 309–313.
  • Cao WH, Zhang JL and Shek CH: ‘Effects of electropulsing treatment on mechanical properties in Ti rich TiNi shape memory alloy’, Mater. Sci. Technol., 2013, 29, (9), 1135–1138.
  • Delville R, Malard B, Pilch J, Sittner P and Schryvers D: ‘Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy’, Acta Mater., 2010, 58, (13), 4503–4515.
  • Andrawes JS, Kronenberger TJ, Perkins TA, Roth JT and Warley RL: ‘Effects of DC current on the mechanical behavior of AlMg1SiCu’, Mater. Manuf. Process., 2007, 22, (1), 91–101.
  • Galiyev A, Kaibyshev R and Gottstein G: ‘Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60’, Acta Mater., 2001, 49, (7), 1199–1207.
  • Sitdikov O and Kaibyshev R: ‘Dynamic recrystallization in pure magnesium’, Mater. Trans., 2001, 41, (9), 1928–1937.
  • Myshlyaev MM, McQueen HJ, Mwembela A and Konopleva E: ‘Twinning, dynamic recovery and recrystallization in hot worked Mg–Al–Zn alloy’, Mater. Sci. Eng. A, 2002, A337, 121–133.
  • Tan JC and Tan MJ: ‘Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet’, Mater. Sci. Eng. A, 2003, A339, 124–132.
  • Al-Samman T and Gottstein G: ‘Dynamic recrystallization during high temperature deformation of magnesium’, Mater. Sci. Eng. A, 2008, A490, (1–2), 411–420.
  • Pan H, Pan F, Yang R, Peng J, Tang A, Huang Q, Song K and Gao Z: ‘Thermal and electrical conductivity of Mg–Zn–Al alloys’, Mater. Sci. Technol., 2014, 30, (8), 988–994.
  • Guyot P and Cottignies L: ‘Precipitation kinetics, mechanical strength and electrical conductivity of AlZnMgCu alloys’, Acta Mater., 1996, 44, (10), 4161–4167.
  • Dariavach NG and Rice JA: ‘Electromigration and the electroplastic effect in aluminum SiC MMCs’, JOM, 2000, 52, 40–42.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.