Microstructure and mechanical properties of Mg–9Li–3Al–xGd alloys

References

• Luo AA: ‘Magnesium casting technology for structural applications’, J. Magnesium Alloys, 2013, 1, 2–22.
   Google Scholar
• Crawford P, Barossa R and Mendez J: ‘On the transformation characteristics of AL14A (Mg-14Li-1Al) alloy’, J. Mater. Process. Technol., 1996, 56, 108–118.
   Web of Science ®Google Scholar
• Watanable H and Tsutsui H: ‘Deformation mechanism in a coarse-grained Mg-Al-Zn alloy at elevated temperatures’, Int. J. Plast., 2001, 17, 387–397.
   Web of Science ®Google Scholar
• Zheng XW, Dong J, Liu WC and Ding WJ: ‘Microstructure and mechanical properties of NZ30K alloy by semi-continuous direct chill and sand mould casting processes’, China Foundry, 2011, 8, (1), 41–46.
   Web of Science ®Google Scholar
• Stanford N and Barnett M: ‘Effect of composition on the texture and deformation behavior of wrought Mg alloys’, Scr. Mater., 2008, 58, 179–182.
   Web of Science ®Google Scholar
• Gehrmann R, Frommert MM and Gottstein G: ‘Texture effects on plastic deformation of magnesium’, Mater. Sci. Eng. A, 2005, A395, 338–349.
   Web of Science ®Google Scholar
• Song GL: ‘Corrosion of magnesium alloys’, Elsevier Science, 2011, 67–72.
   Google Scholar
• ASM Handbook: ‘Properties and selection: nonferrous alloys and special-purpose materials’, ASM Int., 1993, 265–289.
   Google Scholar
• Jensen JA and Chumbley LS: ‘Processing and mechanical properties of magnesium-lithium composites containing steel fibers’, Metall. Mater. Trans. A, 1998, 29A, 863–873.
   Web of Science ®Google Scholar
• Yamamoto A, Ashida T and Kouta Y: ‘Precipitation in Mg-(4-13) %Li-(4-5) %Zn ternary alloys’, Mater. Trans., 2003, 44, 619–624.
   Web of Science ®Google Scholar
• Drozd Z, Trojanova Z and Kudela S: ‘Deformation behavior of Mg–Li–Al alloys’, J. Alloys Compd, 2004, 378, 192–195.
   Web of Science ®Google Scholar
• Liu T, Zhang W and Wu SD: ‘Mechanical properties of a two-phase Mg-8%Li-1%Al processed by equal channel angular pressing’, Mater. Sci. Eng. A, 2003, A360, 345–349.
   Web of Science ®Google Scholar
• Sivakesavam O and Prasad YV: ‘Characteristics of superplasticity domain in the processing map for working of as-cast Mg-11·5Li-1·5A1 alloy’, Mater. Sci. Eng. A, 2002, A323, 270–277.
   Web of Science ®Google Scholar
• Yu HS and Ming GH: ‘Effect of alloying elements on Mg–Li base alloys’, Rare Met. Mater. Eng., 1996, 25, 1–5.
   Google Scholar
• Wang T, Zhang ML and Wu RZ: ‘Effect of cerium on the microstructure and mechanical properties of Mg–8Li–3Al alloys’, J. Rare Earths, 2007, 194.
   Web of Science ®Google Scholar
• Yang Y, Peng XD and Wei QY: ‘Microstructure and mechanical properties of a new α+β-type Mg–9Li–3Al-2·5Sr alloy’, Rare Met. Mater. Eng., 2014, 43, 1281–1285.
   Web of Science ®Google Scholar
• Jiang B, Yang QS, Zhang MX, Qiu D, Li RH and Pan FS: ‘Grain refinement of Mg–Li-Al cast alloys by adding typical master alloys’, Prog. Nat. Sci., 2011, 21, 236–239.
   Web of Science ®Google Scholar
• Yang MB and Pan FS: ‘Effect of Y on microstructure and mechanical properties of Mg-3Sn-Ca (wt. %) alloys’, Mater. Sci. Eng. A, 2009, A525, (1–2), 112–120.
   Web of Science ®Google Scholar
• Ran QS, Lukas HL, Effenberg G and Petzow J: ‘A thermodynamic optimization of the Al-Y system’, J. Less-Common Met., 1989, 146, 213–222.
   Google Scholar
• Buschow KHJ and Van Vucht JHN: ‘Systematic arrangement of the binary rare-earth–aluminium systems’, Philips Res. Rep., 1967, 22, 233–245.
   Google Scholar
• Gao L, Chen RS and Han EH: ‘Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys’, J. Alloys Compd, 2009, 481, 379–384
   Web of Science ®Google Scholar
• Easton M and St-john D: ‘Grain refinement of aluminum alloys: Part I. The nucleant and solute paradigms-a review of the literature’, Metall. Mater. Trans. A, 1999, 30A, 1613–1623.
   Web of Science ®Google Scholar
• Easton M and St-john D: ‘Grain refinement of aluminum alloys: Part II. Confirmation of, and a mechanism for, the solute paradigm’, Metall. Mater. Trans. A, 1999, 30A, 1625–1633.
   Web of Science ®Google Scholar
• Xiao JM: ‘Alloy phase transformation’; 1987, Beijing, Beijing Metallurgical Industry Press.
   Google Scholar
• Yang J, Xiao WL, Wang LD, Wu YM, Wang LM and Zhang HJ: ‘Influence of Gd on the microstructure and strength of Mg-4·5Zn alloy’, Mater. Charact., 2008, 59, 1667–1674.
   Web of Science ®Google Scholar
• Baker H: ‘Introduction to alloy phase diagrams, alloy phase diagrams’, Vol. 3, in ‘ASM handbook’, 1–29; 1992, Materials Park, OH, ASM International.
   Google Scholar
• Zhang JH, Yu P, Liu K, Fang DQ, Tang DX and Meng J: ‘Effect of substituting cerium-rich mischmetal with lanthanum on microstructure and mechanical properties of die-cast Mg–Al–RE alloys’, Mater. Des., 2009, 30, 2372–2378.
   Web of Science ®Google Scholar
• Xu DK, Liu L, Xu YB and Han EH: ‘The influence of element Y on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys’, J. Alloys Compd, 2006, 426, 155–161.
   Web of Science ®Google Scholar
• Lee S, Lee SH and Kim DH: ‘Effect of Y, Sr, and Nd additions on microstructure and microfracture mechanism of squeeze cast AZ91-X magnesium alloys’, Mater. Trans. A, 1998, 29A, 1221–1235.
   Web of Science ®Google Scholar
• Zou HH, Zeng XQ, Zhai CQ and Ding WJ: ‘The effects of yttrium element on microstructure and mechanical properties of Mg–5 wt.% Zn–2 wt.% Al alloy’, Mater. Sci. Eng. A, 2005, A402, 142–148.
   Web of Science ®Google Scholar
• Wang J, Fu JW, Dong XG and Yang YS: ‘Microstructure and mechanical properties of as-cast Mg–Al–Sn–Y–Nd alloy’, Mater. Des., 2012, 36, 432–437.
   Web of Science ®Google Scholar
• Bhat TB and Arunachalam VS: ‘Strengthening mechanisms in alloys’, Proc. Indian Acad. Sci. Eng. Sci., 1980. 3, 275–296.
   Web of Science ®Google Scholar
• Jin JB, Wang ZX, Liu XF and Xie JX: ‘Effect of homogenizing treatment on microstructures and properties of AZ91 alloy’, Acta Metall. Sinica, 2006, 42, (10), 1014–1018.
   Web of Science ®Google Scholar
• Singh A, Watanabe M, Kato A and Tsai AP: ‘Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application’, Mater. Sci. Eng. A, 2004, A385, 382–396.
   Google Scholar
• Zhang JH, Leng Z, Zhang ML, Meng J and Wu RZ: ‘Effect of Ce on microstructure, mechanical properties and corrosion behavior of high-pressure die-cast Mg–4Al-based alloy’, J. Alloys Compd, 2011, 509, 1069–1078.
   Web of Science ®Google Scholar