Preparation of nitinol by non-conventional powder metallurgy techniques

References

• C. M. Wayman and K. Shimizu: ‘The shape memory (‘Marmem’) effect in alloys’, Mater. Sci. Technol., 1972, 6, 175–183.
   Google Scholar
• M. Elahinia and M. Ahmadian: ‘An enhanced SMA phenomenological model. Part I. The shortcomings of the existing models’, Smart Mater. Struct., 2005, 14, 1297–1308. doi: 10.1088/0964-1726/14/6/022
   Web of Science ®Google Scholar
• M. Elahinia and M. Ahmadian: ‘An enhanced SMA phenomenological model. Part II. The experimental study’, Smart Mater. Struct., 2005, 14, 1309–1319. doi: 10.1088/0964-1726/14/6/023
   Web of Science ®Google Scholar
• X. B. Wang, B. Verlinden and J. Van Humbeeck: ‘R-phase transformation in NiTi alloys’, Mater. Sci. Technol., 2014, 30, 1517–1529. doi: 10.1179/1743284714Y.0000000590
   Web of Science ®Google Scholar
• S. A. Thompson: ‘An overview of nickel–titanium alloys used in dentistry’, Int. Endo. J., 2000, 33, 297–310. doi: 10.1046/j.1365-2591.2000.00339.x
   PubMed Web of Science ®Google Scholar
• K. Kanjwal, R. Yeasting, C. Baptista, H. Elsamaloty, M. Sheikh, M. Elahinia et al., ‘Retro-cardiac esophageal mobility and deflection to prevent thermal injury during atrial fibrillation ablation: an anatomic feasibility study’, J. Interv. Card. Electrophysiol., 2011, 30, 45–53. doi: 10.1007/s10840-010-9524-2
   PubMed Web of Science ®Google Scholar
• D. Vojtěch, M. Voděrová, J. Kubásek, P. Novák, P. Šedá, A. Michalcová, J. Fojt, J. Hanuš and O. Mestek: ‘Effects of short-time heat treatment and subsequent chemical surface treatment on the mechanical properties, low-cycle fatigue behaviour and corrosion resistance of a Ni–Ti (50.9 at-% Ni) biomedical alloy wire used for the manufacture of stents’, Mater. Sci. Eng. A, 2011, A528, 1864–1876. doi: 10.1016/j.msea.2010.10.043
   Web of Science ®Google Scholar
• M. Elahinia and H. Ashrafiuon: ‘Nonlinear control of a shape memory alloy actuated manipulator’, J. Vib. Acoust., 2002, 124, 566–575. doi: 10.1115/1.1501285
   Web of Science ®Google Scholar
• M. Elahinia, T. Seigler, D. Michael Leo and M. Ahmadian: ‘Nonlinear stress-based control of a rotary SMA-actuated manipulator’, J. Intell. Mater. Syst. Struct., 2004, 15, 495–508. doi: 10.1177/1045389X04042277
   Web of Science ®Google Scholar
• M. Elahinia, J. Koo, M. Ahmadian and C. Woolsey: ‘Backstepping control of an SMA-actuated robotic arm’, J. Vib. Control, 2005, 11, 407–429. doi: 10.1177/1077546305051201
   Web of Science ®Google Scholar
• M. Elahinia, H. Ashrafiuon, M. Ahmadian and H. Tan: ‘A temperature-based controller for a shape memory alloy actuator’, J. Vib. Acoust., 2005, 127, 285–291. doi: 10.1115/1.1898335
   Web of Science ®Google Scholar
• E. Williams and M. Elahinia: ‘An automotive SMA mirror actuator: modeling, design and experimental evaluation’, J. Intell. Mater. Syst. Struct., 2008, 19, 425–1434. doi: 10.1177/1045389X07087328
   Web of Science ®Google Scholar
• A. Hadi, A. Yousefi-Koma, M. Moghadam, M. Elahinia and A. Ghazavi: ‘Developing a novel SMA-actuated robotic module’, Sens. Actuators A, 2010, 162A, 72–81. doi: 10.1016/j.sna.2010.06.014
   Web of Science ®Google Scholar
• E. Tarkesh Esfahani and M. Elahinia: ‘Developing an adaptive controller for a shape memory alloy walking assistive device’, J. Vib. Control, 2010, 16, 1897–1914. doi: 10.1177/1077546309344163
   Web of Science ®Google Scholar
• S. K. Sadrnezhaad, E. Ahmadi and M. Malekzadeh: ‘Mechanism of reaction of molten NiTi with EBM graphite crucible’, Mater. Sci. Technol., 2009, 25, 699–706. doi: 10.1179/174328408X317075
   Web of Science ®Google Scholar
• M. H. Elahinia, M. Hashemi, M. Tabesh and S. B. Bhaduri: ‘Manufacturing and processing of NiTi implants: a review’, Prog. Mater. Sci., 2012, 57, 911–946. doi: 10.1016/j.pmatsci.2011.11.001
   Web of Science ®Google Scholar
• A. Foroozmehr, A. Kermanpur, F. Ashrafizadeh and Y. Kabiri: ‘Investigating microstructural evolution during homogenization of the equiatomic NiTi shape memory alloy produced by vacuum arc remelting’, Mater. Sci. Eng. A, 2011, A528, 7952–7955. doi: 10.1016/j.msea.2011.07.024
   Web of Science ®Google Scholar
• S. K. Sadrnezhaad and S. B. Raz: ‘Interaction between refractory crucible materials and the melted NiTi shape-memory alloy’, Metall. Mater. Trans. B, 2005, 36B, 395–403. doi: 10.1007/s11663-005-0068-2
   Web of Science ®Google Scholar
• L. Krone, E. Schüller, M. Bram, O. Hamed, H. -P. Buchkremer and D. Stöver: ‘Mechanical behaviour of NiTi parts prepared by powder metallurgical methods’, Mater. Sci. Eng. A, 2004, A378, 185–190. doi: 10.1016/j.msea.2003.10.345
   Web of Science ®Google Scholar
• J. W. Newkirk, J. A. Sago and G. M. Brasel: ‘Metal injection moulding of mechanically alloyed powder’, in ‘Processing and fabrication of advanced materials VII’, (eds. T. S. Srivatsan and K. A. Khor), 213–224; 1998, Warrendale, PA,, The Minerals, Metals and Materials Society.
   Google Scholar
• C. Haberland, M. Elahinia, J. Walker, H. Meier and J. Frenzel: ‘Additive manufacturing of shape memory devices and pseudoelastic components’, in ‘Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation, Snowbird, UT, USA, September 16–18, 2013.
   Google Scholar
• C. Haberland, M. Elahinia, J. Walker, H. Meier and J. Frenzel: Smart Mater Struct., 2014, 23, 104002. doi: 10.1088/0964-1726/23/10/104002
   Web of Science ®Google Scholar
• C. B. Wang, S. Zhang, Q. Shen and L. M. Zhang: ‘Investigation on reactive sintering process of boron carbide ceramics by XRD’, Mater. Sci. Technol., 2009, 809, 809–812. doi: 10.1179/174328408X363371
   Web of Science ®Google Scholar
• P. Novák, A. Michalcová, J. Šerák, D. Vojtěch, T. Fabián, S. Randáková, F. Průša, V. Knotek and M. Novák: ‘Preparation of Ti–Al–Si alloys by reactive sintering’, J. Alloys Compd, 2009, 470, 123–126. doi: 10.1016/j.jallcom.2008.02.046
   Web of Science ®Google Scholar
• Y. Suzuki and H. Unuma: ‘Method for the preparation of an alloy of nickel and titanium’, US Patent 4,719,077; 1988..
   Google Scholar
• M. Kaya, N. Orhan and G. Tosun: ‘Phase transformation behaviours of porous NiTi SMA fabricated as hollow and solid cylinders by SHS’, Mater. Sci. Technol., 2010, 26, 522–527. doi: 10.1179/174328409X410809
   Web of Science ®Google Scholar
• C. L. Chu, C. Y. Chung, P. H. Lin and S. D. Wang: ‘Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis’, Mater. Sci. Eng. A, 2004, A366, 114–119. doi: 10.1016/j.msea.2003.08.118
   Web of Science ®Google Scholar
• W. Shuilin, C. Y. Chung, Xiangmei. Liu, Paul K. Chu, J. P. Y. Ho, C. L. Chu, Y. L. Chan, K. W. K. Yeung, W. W. Lu, K. M. C. Cheung and K. D. K. Luk: ‘Pore formation mechanism and characterization of porous NiTi shape memory alloys synthesized by capsule-free hot isostatic pressing’, Acta Mater., 2007, 55, 3437–3451. doi: 10.1016/j.actamat.2007.01.045
   Web of Science ®Google Scholar
• M. Whitney, S. F. Corbin and R. B. Gorbet: ‘Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis’, Acta Mater., 2008, 56, 559–570. doi: 10.1016/j.actamat.2007.10.012
   Web of Science ®Google Scholar
• M. Whitney, S. F. Corbin and R. B. Gorbet: ‘Investigation of the influence of Ni powder size on microstructural evolution and the thermal explosion combustion synthesis of NiTi’, Intermetallics, 2009, 17, 894–906. doi: 10.1016/j.intermet.2009.03.018
   Web of Science ®Google Scholar
• P. Novák, P. Pokorný, V. Vojtěch, A. Knaislová, A. Školáková, J. Čapek, M. Karlík and J. Kopeček: ‘Formation of Ni–Ti intermetallics during reactive sintering at 500–650°C’, Mater. Chem. Phys., 2015, http://dx.doi.org/10.1016/j.matchemphys.2015.02.007.
   Web of Science ®Google Scholar
• S. F. Corbin and D. Cluff: ‘Determining the rate of (β-Ti) decay and its influence on the sintering behavior of NiTi’, J. Alloys Compd, 2009, 487, 179–186. doi: 10.1016/j.jallcom.2009.08.044
   Web of Science ®Google Scholar
• C. L. Chu, J. C. Chung and P. K. Chu: ‘Effects of heat treatment on characteristics of porous Ni-rich NiTi SMA prepared by SHS technique’, Trans. Nonferrous Met. Soc. China, 2006, 16, 49–53. doi: 10.1016/S1003-6326(06)60009-5
   Web of Science ®Google Scholar
• M. Kaya, N. Orhan, B. Kurt and T. I. Khan: ‘The effect of solution treatment under loading on the microstructure and phase transformation behavior of porous NiTi shape memory alloy fabricated by SHS’, J. Alloys Compd, 2009, 475, 378–382. doi: 10.1016/j.jallcom.2008.07.023
   Web of Science ®Google Scholar
• P. Novák, A. Michalcová, I. Marek, M. Mudrová, K. Saksl, J. Bednarčík, P. Zikmund and D. Vojtěch: ‘On the formation of intermetallics in Fe–Al system – An in situ XRD study’, Intermetallics, 2013, 32, 127–136. doi: 10.1016/j.intermet.2012.08.020
   Web of Science ®Google Scholar
• P. Novák, A. Michalcová, M. Voděrová, M. Šíma, J. Šerák, D. Vojtěch and K. Wienerová: ‘Effect of reactive sintering conditions on microstructure of Fe–Al–Si alloys’, J. Alloys Compd, 2010, 493, 81–86. doi: 10.1016/j.jallcom.2009.12.040
   Web of Science ®Google Scholar
• P. Novák, T. Kubatík, J. Vystrčil, R. Hendrych, J. Kříž, J. Mlynár and D. Vojtěch: ‘Powder metallurgy preparation of Al–Cu–Fe quasi-crystals using mechanical alloying and spark plasma sintering’, Intermetallics, 2014, 52, 131–137. doi: 10.1016/j.intermet.2014.04.003
   Web of Science ®Google Scholar
• T. Mousavi, F. Karimzadeh and M. H. Abbasi: ‘Synthesis and characterization of nanocrystalline NiTi intermetallic by mechanical alloying’, Mater. Sci. Eng. A, 2008, A487, 46–51. doi: 10.1016/j.msea.2007.09.051
   Web of Science ®Google Scholar
• M. Ghadimi, A. Shokuhfar, H. R. Rostami and M. Ghaffari: ‘Effects of milling and annealing on formation and structural characterization of nanocrystalline intermetallic compounds from Ni–Ti elemental powders’, Mater. Lett., 2012, 80, 181–183. doi: 10.1016/j.matlet.2012.04.098
   Web of Science ®Google Scholar
• R. Amini, F. Alijani, M. Ghaffari, M. Alizadeh and A. K. Okyay: ‘Formation of B19′, B2, and amorphous phases during mechano-synthesis of nanocrystalline NiTi intermetallics’, Powder Technol., 2014, 253, 797–802. doi: 10.1016/j.powtec.2013.12.029
   Web of Science ®Google Scholar
• M. Farvizi, T. Ebadzadeh, M. R. Vaezi, E. Y. Yoon, Y-J. Kim, H. S. Kim and A. Simchi: ‘Microstructural characterization of HIP consolidated NiTi–nano Al2O3 composites’, J. Alloys Compd, 2014, 606, 21–26. doi: 10.1016/j.jallcom.2014.03.184
   Web of Science ®Google Scholar
• V. N. Chuvildeev, D. V. Panov, M. S. Boldin, A. V. Nokhrin, Yu. V. Blagoveshchensky, N. V. Sakharov, S. V. Shotin and D. N. Kotkov: ‘Structure and properties of advanced materials obtained by Spark Plasma Sintering’, Acta Astronaut., 2015, 109, 172–176. doi: 10.1016/j.actaastro.2014.11.008
   Web of Science ®Google Scholar
• Z. Zhang, Z. Liu, J. Lu, X. Shen, F. Wang and Y. Wang: ‘The sintering mechanism in spark plasma sintering – Proof of the occurrence of spark discharge’, Scr. Mater., 2014, 81, 56–59. doi: 10.1016/j.scriptamat.2014.03.011
   Web of Science ®Google Scholar
• R. Marder, C. Estourne, G. Chevallier and R. Chaim: ‘Plasma in spark plasma sintering of ceramic particle compacts’, Scr. Mater., 2014, 82, 57–60. doi: 10.1016/j.scriptamat.2014.03.023
   Web of Science ®Google Scholar
• T. B. Massalski: ‘Binary alloy phase diagrams’; 1990, Materials Park, OH, ASM International.
   Google Scholar
• W. Guo, I. Steinbach, C. Somsen and G. Eggeler: ‘On the effect of superimposed external stresses on the nucleation and growth of Ni4Ti3 particles: a parametric phase field study’, Acta Mater., 2011, 59, 3287–3296s. doi: 10.1016/j.actamat.2011.02.002
   Web of Science ®Google Scholar