References
- F. M. Schmidt, J. F. Agassant and M. Bellet: Polym. Eng. Set, 1998, 38, (9), 1399–1412.
- Z. S. Yin, H. X. Huang and J. H. Liu: ANTEC, 36-40; 2005, Brookfield, CT, Society of Plastics Engineers.
- K. Chung: J. Mater. Shaping Technol. , 1989, 7, (4), 229–239.
- J. P. McEvoy, C. G. Armstrong and R. J. Crawford: Adv. Polym. Technol, 1998, 17, (4), 339–352.
- G. H. Menary, C. G. Armstrong, R. J. Crawford and J. P. McEvoy: Plast. Rubber Compos. , 2000, 29, (7), 360–370.
- X.-T. Pham, F. Thibault and L.-T. Lim: Polym. Eng. Set, 2004,44, (8), 1460–1472.
- H.-J. Park, J. R. Kim and I. S. Yoon: ANTEC, 2003, 1, 859–863.
- J. F. Lappin, P. J. Martin and E. M. A. Harkin-Jones: Proc. Polymer Processing Society North American Regional Meeting 1998, Toronto, Ontario, Canada, August 1998, Polymer Processing Society, 149-150.
- D. Laroche and F. Erchiqui: ANTEC, 1998, 1, 676–680.
- P. Collins, J. F. Lappin, E. Harkin-Jones and P. J. Martin: Plast. Rubber Compos. , 2000, 29, (7), 349–359.
- G. H. Menary: ‘Modelling injection stretch blow moulding and the resulting 'in service’ performance of PET bottles', PhD thesis, Queen's University Belfast, 2001.
- L. Chevalier, C. Linhone and G. Regnier: Plast. Rubber Compos. , 1999, 28, (8), 393–400.
- K. Y. Tshai: ‘Evaluation and development of constitutive material models for thermoforming applications’, PhD thesis, Queen's University Belfast, 2004.
- A. Derdouri, R. Connolly, R. Khayat, E. Verron and B. Peseux: ANTEC, 2000, 672-675.
- F. Erchiqui, A. Derdouri and A. Garcia-Rejon: ANTEC, 2002, Paper 231, Society of Plastic Engineers.
- J. H. Christensen, H. K. Rasmussen and E. M. Kjoer: ANTEC, 1999, Paper 246, Society of Plastics Engineers.
- N. Billon, A. Erner and E. Gorlier: Proc. PPS 21, Leipzig, 2005, Polymer Processing Society, Paper 5L3-3.
- L. Capt, S. Rettenberger, H. Munstedt and M. Kamal: Polym. Eng. Set, 2003, 43, (7), 1428–1441.
- N. Martin, S. S. Dias, E. M. A. Harkin-Jones and P. J. Martin: Proc. Int. Conf. PPS-18, Guimardes, Portugal, June 2002, Polymer Processing Society, Paper 224.
- P. J. Martin, P. Collins, G. Harron and E. M. A. Harkin-Jones: Proc. Conf. ‘Polymer Process Engineering 01’, University of Bradford, June 2001, IOM Communications, 108-120.
- K. Y. Tshai, E. M. A. Harkin-Jones, P. J. Martin and G. H. Menary: Proc. Int. Conf. ANTEC 2003, Nashville, TN, USA, May 2003, Society of Plastics Engineers, 785-790.
- P. Bourgin, I. Cormeau and T. Saint-Matin: J. Mater. Process. Technol, 1995, 54, 1–11.
- P. G. Llana and M. C. Boyce: Polymer, 1999, 40, 6729–6751.
- C. P. Buckley, D. C. Jones and D. P. Jones: Polymer, 1996,37, (12), 2403–2414.
- A. M. Adam: ‘Biaxial drawing of amorphous polymer films near the glass transition’, DPhil thesis, University of Oxford, 1995.
- P. Chandran and S. A. Jabarin: Adv. Polym. Technol, 1993, 12, (2), 119–132.
- P. Chandran and S. A. Jabarin: Adv. Polym. Technol, 1993, 12, (2), 133–151.
- P. Chandran and S. A. Jabarin: Adv. Polym. Technol, 1993, 12, (2), 153–165.
- Y. Marco, L. Chevalier, G. Regnier and A. Poitou: Macromol. Symp. , 2002, 185, 15–34.
- Y. Marco, L. Chevalier and M. Chaouche: Polymer, 2002, 43, (24), 6569–6574.