Finite element analysis of mode II delamination suppression in stitched composites using cohesive zone model

References

• A.P. Mouritz: ‘Review of z-pinned composite laminates’, Composites A, 2007, 38A, 2383–2397.
   Google Scholar
• A. P. Mouritz and B. N. Cox: ‘A mechanistic approach to the properties of stitched laminates’, Composites A, 2000, 31A, 1–27. doi: 10.1016/S1359-835X(99)00056-1
   Web of Science ®Google Scholar
• A. P. Mouritz, C. Baini and I. Herszberg: ‘Mode I interlaminar fracture toughness properties of advanced textile fibreglass composites’, Composites A, 1999, 30A, 859–870. doi: 10.1016/S1359-835X(98)00197-3
   Web of Science ®Google Scholar
• J. Ren, Y. K. Kim and J. Rice: ‘Comparing the fracture toughness of 3-D braided preform composites with z-fiber-reinforced laminar composites’, Text. Res. J., 2011, 81, (4), 335–343. doi: 10.1177/0040517510385172
   Web of Science ®Google Scholar
• D. T. Fishpool, A. Rezai, D. Baker, S. L. Ogin and P. A. Smith: ‘Interlaminar toughness characterisation of 3D woven carbon fibre composites’, Plast. Rubber Compos., 2013, 42, (3), 108–114. doi: 10.1179/1743289812Y.0000000036
   Web of Science ®Google Scholar
• K. A. Dransfield, L. K. Jain and Y. -W. Mai: ‘On the effects of stitching in CFRPs. I - mode I delamination toughness’, Compos. Sci. Technol., 1998, 58, 815–827. doi: 10.1016/S0266-3538(97)00229-7
   Web of Science ®Google Scholar
• M. D. K. Wood, X. Sun, L. Tong, A. Katzos, A. R. Rispler and Y. -W. Mai: ‘The effect of stitch distribution on mode I delamination toughness of stitched laminated composites - experimental results and FEA simulation’, Compos. Sci. Technol., 2007, 67, 1058–1072. doi: 10.1016/j.compscitech.2006.06.002
   Web of Science ®Google Scholar
• K. T. Tan, N. Watanabe, M. Sano, Y. Iwahori and H. Hoshi: ‘Interlaminar fracture toughness of Vectran-stitched composites - experimental and computational analysis’, J. Compos. Mater., 2010, 44, (26), 3203–3229. doi: 10.1177/0021998310369581
   Web of Science ®Google Scholar
• B. V. Sankar and S. K. Sharma: ‘Mode II delamination toughness of stitched graphite/epoxy textile composites’, Compos. Sci. Technol., 1997, 57, 729–737. doi: 10.1016/S0266-3538(97)00032-8
   Web of Science ®Google Scholar
• L. K. Jain, K. A. Dransfield and Y. -W. Mai: ‘On the effect of stitching in CFRPs-II. Mode II delamination toughness’, Compos. Sci. Technol., 1998, 58, 829–837. doi: 10.1016/S0266-3538(97)00186-3
   Web of Science ®Google Scholar
• M. D. K. Wood, X. Sun, L. Tong, Q. Luo, A. Katzos and A. Rispler: ‘A new ENF test specimen for the mode II delamination toughness testing of stitched woven CFRP laminates’, J. Compos. Mater., 2007, 41, (14), 1743–1772. doi: 10.1177/0021998306069890
   Web of Science ®Google Scholar
• J. Herwan, A. Kondo, S. Morooka and N. Watanabe: ‘Effects of stitch density and stitch thread thickness on mode II delamination properties of Vectran stitched composites’, Plast. Rubber Compos., 2014, 43, (9), 300–308. doi: 10.1179/1743289814Y.0000000103
   Web of Science ®Google Scholar
• L. Chen, P. G. Ifju and B. V. Sankar: ‘Analysis of mode I and mode II tests for composites with translaminar reinforcements’, J. Compos. Mater., 2005, 39, (15), 1311–1333. doi: 10.1177/0021998305050425
   Web of Science ®Google Scholar
• L. Zhao, Y. Gong, J. Zhang, Y. Chen and B. Fei: ‘Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements’, Compos. Struct., 2014, 116, 509–522. doi: 10.1016/j.compstruct.2014.05.042
   Web of Science ®Google Scholar
• F. Bianchi and X. Zhang: ‘A cohesive zone model for predicting delamination suppression in z-pinned laminates’, Compos. Sci. Technol., 2011, 71, (10), 1898–1907. doi: 10.1016/j.compscitech.2011.09.004
   Web of Science ®Google Scholar
• F. Bianchi and X. Zhang: ‘Predicting mode-II delamination suppression in z-pinned laminates’, Compos. Sci. Technol., 2012, 72, (8), 924–932. doi: 10.1016/j.compscitech.2012.03.003
   Web of Science ®Google Scholar
• L. Zhao, Y. Gong, T. Qin, S. Mehmood and J. Zhang: ‘Failure prediction of out-of-plane woven composite joints using cohesive element’, Compos. Struct., 2013, 106, 407–416. doi: 10.1016/j.compstruct.2013.06.017
   Web of Science ®Google Scholar
• Y. Wang, C. Soutis, A. Hajdaei and P. J. Hogg: ‘Finite element analysis of composite T-joints used in wind turbine blades’, Plast. Rubber Compos., 2015, 44, (3), 87–97. doi: 10.1179/1743289814Y.0000000113
   Web of Science ®Google Scholar
• C. Soutis, N. A. Fleck and P. A. Smith: ‘Failure prediction technique for compression loaded carbon fibre-epoxy laminate with open holes’, J. Compos. Mater., 1991, 25, (11), 1476–1498.
   Web of Science ®Google Scholar
• H. Ahmad, A. D. Crocombe and P. A. Smith: ‘Physically based finite element strength prediction in notched woven laminates under quasi-static loading’, Plast. Rubber Compos., 2013, 42, (3), 93–100. doi: 10.1179/1743289812Y.0000000038
   Web of Science ®Google Scholar
• Y. Iwahori, K. Nakane and N. Watanabe: ‘DCB test simulation of stitched CFRP laminates using interlaminar tension test results’, Compos. Sci. Technol., 2009, 69, 2315–2322. doi: 10.1016/j.compscitech.2008.12.018
   Web of Science ®Google Scholar
• M. R. E. Nasution, N. Watanabe, A. Kondo and A. Yudhanto: ‘Thermomechanical properties and stress analysis of 3-D textile composites by asymptotic expansion homogenization method’, Composites B, 2014, 60B, 387–391.
   Google Scholar
• G. Alfano and M. A. Crisfield: ‘Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues’, Int. J. Numer. Methods Eng., 2001, 50, 1701–1736. doi: 10.1002/nme.93
   Web of Science ®Google Scholar
• R. Krueger: ‘Development and application of benchmark examples for mode II static delamination propagation and fatigue growth predictions’, NASA/CR-2011-217305 NIA report no. 2011-02, NASA Langley Research Center, Hampton, VA, USA; 2011.
   Google Scholar
• L. Hamitouche, M. Tarfaoui and A. Vautrin: ‘An interface debonding law subject to viscous regularization for avoiding instability: application to the delamination problems’, Eng. Fract. Mech., 2008, 75, (10), 3084–3100. doi: 10.1016/j.engfracmech.2007.12.014
   Web of Science ®Google Scholar
• V. Mollón, J. Bonhomme, A. Argüelles and J. Viña: ‘In?uence of the crack plane asymmetry over GII results in carbon epoxy ENF specimens’, Compos. Struct., 2012, 94, 1187–1191. doi: 10.1016/j.compstruct.2011.10.025
   Web of Science ®Google Scholar
• Y. Iwahori, K. Nakane and N. Watanabe: ‘DCB test simulation of stitched CFRP laminates using interlaminar tension test results’, Compos. Sci. Technol., 2009, 69, (14), 2315–2322. doi: 10.1016/j.compscitech.2008.12.018
   Web of Science ®Google Scholar