Advanced search
Publication Cover
Powder Metallurgy Volume 52, 2009 - Issue 2
Journal homepage
27
Views
8
CrossRef citations to date
0
Altmetric
Articles

Effects of sintering and its type on microstructural and tensile response of pure tin

M. E. AlamDepartment of Mechanical EngineeringNational University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore;, Email: [email protected]
&
M. GuptaDepartment of Mechanical EngineeringNational University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore
Pages 105-110 | Published online: 02 Dec 2013

References

  • E. S. Hedges: ‘Tin and its alloys’, 1-14; 1960, London, Edward Arnold.
  • M. Abtew and G. Selvaduray: Mater. Set Eng. R, 2000, R27, 95–141.
  • S. Blunden and T. Wallace: Food Chem. Toxicol, 2003, 41, 1651–1662.
  • Tin Research Institute: ‘Tin and its uses’, 83-94; 1970-72, Greenford, Tin Research Institute.
  • R. M. German: ‘Powder metallurgy science’, 2nd edn, 261-264; 1994, Princeton, NJ, Metal Powder Industries Federation.
  • J. P. Schaffer, A. Saxena, S. D. Antolovich, T. H. Sanders and S. B. Warner: ‘The science and design of engineering materials’, 2nd edn; 1999, New York, McGraw-Hill.
  • R. M. German: ‘Sintering theory and practice’, 68-72, 95-121; 1996, New York, John Wiley and Sons Inc.
  • R. Roy, D. K. Agrawal and J. Cheng: US Patent 6183689 Bl, 2001.
  • A. Upadhyaya, G. Sethi and D. K. Agrawal: Proc. Sintering 2003 Conf. on ‘Microwave sintering of Cu-12Sn alloy’, University Park, PA, USA, September 2003, Penn State University, 1-15.
  • J. Cheng, D. K. Agrawal, S. Komaneni, M. Mattis and R. Roy: Mater. Res. Innov. , 1997, 1, 44–52.
  • R. M. Anklekar, D. K. Agrawal and R. Roy: Powder Metall, 2001, 44, 355–362.
  • K. Rödiger, K. Dreyer, T. Gerdes and M. Willert-Porada: Int. J Refract. Met. Hard Mater. , 1998, 16, 409–416.
  • R. Roy, J. Cheng and D. K. Agrawal: US Patent 6365885 Bl, 2002.
  • M. Gupta and W. L. E. Wong: Ser. Mater. , 2005, 52, 479–483.
  • S. Tanabe, J. Shibata and H. Ichinose: J Jpn Soc. Powder Powder Metall. , 1990, 37, 433–438.
  • S. W. Banovic: Mater. Set Eng. A, 2007, A460—A461, 428-435.
  • Y. C. Lin, H. C. Li, S. S. Liou and M. T. Shie: Mater. Set Eng. A, 2004, A373, 363–369.
  • W. L. E. Wong, S. Karthik and M. Gupta: Mater. Set Technol, 2005, 21, 1063–1070.
  • S. F. Hassan and M. Gupta: Mater. Set Eng. A, 2006, A425, 22–27.
  • ASM International: `ASM handbook', Vol. 2, ‘Properties and selection: nonferrous alloys and special-purpose materials’, 1166-1168; 1993, Materials Park, OH, ASM International.
  • G. Petzow: `Metallographic etching', 2nd edn, 135-139; 1999, Materials Park, OH, ASM International.
  • S. S. Panda, A. Upadhyaya and D. K. Agrawal: J. Mater. Set, 2007, 42, 966–976.
  • G. F. Bocchini: Int. J. Powder Metall. , 1986, 22, 185–202.
  • M. Gupta: Aluminum Transactions, 1999, 1, 33–39.
  • R. Roy, D. K. Agrawal, J. Cheng and S. Gedevanishvili: Nature, 1999, 399, 668–670.
  • R. E. Reed-Hill: ‘Physical metallurgy principles’, 2nd edn, 786-794; 1964, New York, D. Van Nostrand Company.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.