References
- Federzoni L, Riedel H, Coube O, Oldenburg M, Gethin DT, Mosbah P, Virta J, Martikainen H, Frachon A, Doremus P: ‘State of the art review: comparison of computer models representing powder compaction process’, Powder Metall., 1999, 42, (4), 301–311.
- Coube O, Riedel H: ‘Numerical simulation of metal powder die compaction with special consideration of cracking’, Powder Metall., 2000, 43, (2), 123–131.
- Tahir SM, Ariffin AK: ‘Fracture in metal powder compaction’, Int. J. Solids Struct., 2006, 43, (6), 1528–1542.
- Mori K, Sato Y, Shiomi M, Osakada K: ‘Prediction of fracture generated by elastic recoveries of tools in multi-level powder compaction using finite element simulation’, Int. J. Mach. Tools Manuf., 1999, 39, (7), 1031–1045.
- Redanz P: ‘A study of stresses in powder compacted components during and after ejection’, Int. J. Solids Struct., 2001, 38, (5), 759–775.
- Jonsen P, Häggblad H, Sommer K: ‘Tensile strength and fracture energy of pressed metal powder by diametral compression test’, Powder Technol., 2007, 176, (2–3), 148–155.
- Jonsen P, Haggblad H: ‘Fracture energy based constitutive models for tensile fracture of metal powder compacts’, Int. J. Solids Struct., 2007, 44, (20), 6398–6411.
- Hernández JA, Oliver J, Cante JC, Weyler R: ‘Numerical modeling of crack formation in powder forming processes’, Int. J. Solids Struct., 2011, 48, (2), 292–316.
- Hernández JA, Oliver J, Cante JC, Weyler R: ‘A robust approach to model densification and crack formation in powder compaction processes’, Int. J. Numer. Methods Eng., 2011, 87, 735–767.
- Rolland SA, Gethin DT, Lewis RW, Tweed JH: ‘Failure risk in powder-compacted parts’, Proc. IMechE E, 2010, 224E, (3), 203–212.
- Pavier E, Doremus P: ‘Caractérisation du comportement d’une poudre de fer pour le procédé de compression en matrice’, PhD thesis, L’Institut National Polytechnique de Grenoble, Grenoble, France, 1998.
- Ferguson BL, Krauss TM: ‘Modeling ejection of die pressed parts’, Adv. Powder Metall., 1990, 1, 147–164.
- Hernández JA, Cante JC, Oliver J, Weyler R: ‘On the proper characterization of tooling motions and initial conditions in powder die compaction modeling’, J. Mater. Process. Technol., 2011, 211, (8), 1348–1357.
- Zenger DC, Cai H: ‘Handbook of the common cracks in green PM compacts’; 1997, Worcester, MA, Powder Metallurgy Research Center, WPI.