References
- Hilton M. R. and Fleischauer P. D.: ‘Applications of solid lubricant films in spacecraft’, Surf. Coat. Technol., 1992, 54–55, 435–441.
- Donnet C.: ‘Advanced solid lubricant coatings for high vacuum environments’, Surf. Coat. Technol., 1996, 80, 151–156.
- John P. J., Prasad S. V., Voevodin A. A. and Zabinski J. S.: ‘Calcium sulfate as a high temperature solid lubricant’, Wear, 1998, 219, 155–161.
- Singer I. L., Fayeulle S. and Ehni P. D.: ‘Wear behavior of triode-sputtered MoS2 coatings in dry sliding contace with steel and ceramics’, Wear, 1996, 195, 7–20.
- Mamedov V.: ‘Microstructure and mechanical properties of PM Fe-Cu-Sn alloys containing solid lubricants’, Powder Metall., 2004, 47, 173–179.
- Kutschej K., Mitterer C., Mulligan C. P. and Gall D.: ‘High-temperature tribological behabior of CrN-Ag self-lubricating coatings’, Adv. Eng. Mater., 2006, 8, 1125–1129.
- Muratore C. and Voevodin A. A.: ‘Chameleon coatings: Adaptive surfaces to reduce friction and wear in extreme environments’, Ann. Rev. Mater. Res., 2009, 39, 297–324.
- Voevodin A. A., Hu J. J., Fitz T. A. and Zabinski J. S.: ‘Nanocomposite tribological coatings with chameleon friction surface adaption’, J. Vac. Sci. Technol. A, 2002, A20, 1434–1444.
- Theiler G. and Gradt T.: ‘Friction and wear of PEEK composites in vacuum environment’, Wear, 2010, 269, 278–284.
- Donnet C., Le Mogne T. h. and Matin J. M.: ‘Superlow friction of oxygen-free MoS2 coatings in ultrahigh vacuum’, Surf. Coat. Technol., 1993, 62, 406–411.
- Xu J., Zhu M. H., Zhou Z. R., Kapsa P. h. and Vincent L.: ‘An investigation on fretting wear life of bonded MoS2 solid lubricant coatings in complex conditions’, Wear, 2003, 255, 253–258.
- Windom B. C., Sawyer W. G. and Hahn D. W.: ‘A Raman spectroscopic study of MoS2 and MoO3: applications to tribological systems’, Tribol. Lett., 2011, 42, 301–310.
- Endrino J. L., Nainaparampil J. J. and Krzanowski J. E.: ‘Microstructure and vacuum tribology of TiC-Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition’, Surf. Coat. Technol., 2002, 157, 95–101.
- Gulbiński W. and Suszko T.: ‘Thin films of Mo2N/Ag nanocomposite – the structure, mechanical and tribological properties’, Surf. Coat. Technol., 2006, 201, 1469–1476.
- Basnyat P., Luster B., Kertzmam Z., Stadler S., Kohli P., Aouadi S., Xu J., Mishra S. R., Eryilmaz O. L. and Erdemir A.: ‘Mechanical and tribological properties of CrAlN-Ag self-lubricating films’, Surf. Coat. Technol., 2007, 202, 1011–1016.
- Li J. L., Xiong D. S., Huang Z. J., Kong J. and Dai J. H.: ‘Effect of Ag and CeO2 on friction and wear properties of Ni-base composite at high temperature’, Wear, 2009, 267, 576–584.
- Muratore C., Voevodin A. A., Hu J. J., Jones J. G. and Zabinski J. S.: ‘Growth and characterization of nanocomposite yttria-stabilized zirconia with Ag and Mo’, Surf. Coat. Technol., 2005, 200, 1549–1554.
- Voevodin A. A., O’Neill J. P. and Zabinski J. S.: ‘WC/DLC/WS2 nanocomposite coatings for aerospace tribology’, Tribol. Lett., 1999, 6, 75–78.
- Baker C. C., Hu J. J. and Voevodin A. A.: ‘Preparation of Al2O3/DLC/Au/MoS2 chameleon coatings for space and ambient environments’, Surf. Coat. Technol., 2006, 201, 4224–4229.
- Zheng X. H., Tu J. P., Lai D. M., Peng S. M., Gu B., Hu S. B.: ‘Microstructure and tribological behavior of WS2-Ag composite films deposited by RF magnetron sputtering’, Thin Solid Films, 2008, 516, 5404–5408.
- Scharf T. W., Kotula P. G. and Prasad S. V.: ‘Friction and wear mechanisms in MoS2/Sb2O3/Au nanocomposite coatings’, Acta. Mater., 2010, 58, 4100–4109.
- Gardos M. N.: ‘The synergistic effects of graphite on the friction and wear of MoS2 films in air’, Tribol. Trans., 1988, 31, 214–27.
- Muratore C. and Voevodin A. A.: ‘Molybdenum disulfide as a lubricant and catalyst in adaptive nanocomposite coatings’, Surf. Coat. Technol., 2006, 201, 4125–4130.
- Aouadi S. M., Paudel Y., Simonson W. J., Ge Q., Kohli P., Muratore C. and Voevodin A. A.: ‘Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content’, Surf. Coat. Technol., 2009, 203, 1304–1309.
- Ross S. and Sussman A.: ‘Surface oxidation of molybdenum disulfide’, J. Phys. Chem., 1955, 59, 889–892.
- Qiang Y. H., Ge S. R. and Xue Q. J.: ‘Microstructure and tribologial behebiour of nitrocarburizing quenching duplex treated steel’, Tribol. Int., 1999, 32, 131–136.
- Skinner J., Gane N. and Tabor D.: ‘The microfriction of graphite’, Nature, 1971, 232, 195–196.