Oxide dispersion strengthened ferritic steel fabricated by mechanical alloying and spark plasma sintering

References

• Verhiest K., Almazouzi A., De Wispelaere N., Petrov R. and Claessens S.: ‘Development of oxides dispersion strengthened steels for high temperature nuclear reactor applications’, J. Nucl. Mater., 2009, 385, 308–311.
   Web of Science ®Google Scholar
• Ukai S., Harada M., Okada H., Inoue M., Nomura S., Shikakura S., Asabe K., Nishida T. and Fujiwara M.: ‘Alloying design of oxide dispersion strengthened ferritic steel for long life FBRs core materials’, J. Nucl. Mater., 1993, 204, 65–73.
   Web of Science ®Google Scholar
• Zinkle S. J.: ‘Advanced materials for fusion technology’, Fusion Eng. Des., 2005, 74, 31–40.
   Web of Science ®Google Scholar
• Ehrlich K.: ‘Materials research towards a fusion reactor’, Fusion Eng. Des., 2001, 56, 71–82.
   Web of Science ®Google Scholar
• Degueldre C., Conradson S. and Hoffelner W.: ‘Characterisation of oxide dispersion-strengthened steel by extended X-ray absorption spectroscopy for its use under irradiation’, Comput. Mater. Sci., 2005, 33, 3–12.
   Web of Science ®Google Scholar
• Klimenkov M., Lindau R. and Möslang A.: ‘New insights into the structure of ODS particles in the ODS-Eurofer alloy’, J. Nucl. Mater., 2009, 386–388, 553–556.
   Web of Science ®Google Scholar
• Ukai S., Ohtsuka S., Kaito T., Sakasegawa H., Chikata N., Hayashi S. and Ohnuki S.: ‘High-temperature strength characterization of advanced 9Cr-ODS ferritic steels’, Mater. Sci. Eng. A, 2009, A510, 115–120.
   Web of Science ®Google Scholar
• Romanoski G. R., Snead L. L., Klueh R. L. and Hoelzer D. T.: ‘Development of an oxide dispersion strengthened, reduced-activation steel for fusion energy’, J. Nucl. Mater., 2000, 283, 642–646.
   Web of Science ®Google Scholar
• Castro V., Leguey T., Monge M. A., Muñoz A., Pareja R., Amador D. R., Torralba J. M. and Victoria M.: ‘Mechanical dispersion of Y2O3 nanoparticles in steel Eurofer 97: process and optimization’, J. Nucl. Mater., 2003, 322, 228–234.
   Web of Science ®Google Scholar
• Çetinkaya C., Fındık T. and Özbilen S.: ‘Characterisation of mechanically milled 17-4 PH gas atomized stainless steel powders’, Mater. Des., 2007, 28, 266–271.
   Web of Science ®Google Scholar
• Soufiani A. M., Enayati M. H. and Karimzadeh F.: ‘Mechanical alloying behavior of Ti6Al4V residual scraps with addition of Al2O3 to produce nanostructured powder’, Mater. Des., 2010, 31, 3954–3959.
   Web of Science ®Google Scholar
• Botcharova E., Heilmarier M., Freudenberger J., Drew G., Kudashow D., Martin U. and Schultz L.: ‘Supersaturated solid solution of niobium in copper by mechanical alloying’, J. Alloys Compd, 2003, 351, 119–125.
   Web of Science ®Google Scholar
• Liu X. M., Song X. Y., Zhao S. X. and Zhang J. X.: ‘Spark plasma sintering densification mechanism for cemented carbides with different WC particle sizes’, J. Am. Ceram. Soc., 2010, 93, 3153–3158.
   Web of Science ®Google Scholar
• Mamedov V.: ‘Spark plasma sintering as advanced PM sintering method’, Powder Metall., 2002, 45, 322–328.
   Web of Science ®Google Scholar
• Guo L. N., Jia C. C., Hu B. F. and Li H. Y.: ‘Microstructure and mechanical properties of an oxide dispersion strengthened ferritic steel by a new fabrication route’, Mater. Sci. Eng. A, 2010, A527, 5220–5224.
   Web of Science ®Google Scholar
• Guo Z. M., Liu Q., Yang W. W. and Guo L. C.: ‘Densification and properties of ODS-iron based alloy’, Rare Met., 2012, 31, 339–342.
   Web of Science ®Google Scholar
• Yao Z. H., Xiong W. H., Qu J. and Lin S. J.: ‘Role of A2 and A50 process on the oxide dispersion strengthened ferritic alloy fabricated by mechanical alloying’, Mater. Des., 2011, 32, 2821–2826.
   Web of Science ®Google Scholar
• Hirata A., Fujita T., Wen Y. R., Schneibel J. H., Liu C. T. and Chen M. W.: ‘Atomic structure of nanoclusters in oxide-dispersion-strengthened steels’, Nat. Mater., 2011, 10, 922–926.
   PubMed Web of Science ®Google Scholar
• Seyed Ebrahimi S. H., Emamy M., Pourkia N. and Lashgari H. R.: ‘The microstructure, hardness and tensile properties of a new super high strength aluminum alloy with Zr addition’, Mater. Des., 2010, 31, 4450–4456.
   Web of Science ®Google Scholar
• Liu G., Zhang G. J., Zhang F., Ding X. D., Sun Y. J., Sun J. and Ma E.: ‘Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility’, Nat. Mater., 2013, 12, 344–350.
   PubMed Web of Science ®Google Scholar