Mechanical alloying and field assisted hot pressing of nanocrystalline B2-NiAl intermetallic compound

References

• Godin T, Harvey S and Stouffs P: ‘Theoretical analysis of environmental and energetic performance of very high temperature turbo-jet engines’, Int. J. Therm. Sci., 1999, 38, 442–451.
   Web of Science ®Google Scholar
• Bewlay BP, Lewandowksi JJ and Jackson MR: ‘Refractory metal-intermetallic in-situ composites for aircraft engines’, JOM, 1997, 44–67.
   Web of Science ®Google Scholar
• Stoloff NS, Liu CT and Deevi SC: ‘Emerging applications of intermetallics’, Intermetallics, 2000, 8, 1313–1320.
   Web of Science ®Google Scholar
• Liu CT and Stiegler JO: ‘Ordered intermetallics’, in ‘ASM handbook’, 10th edn, Vol. 2, ‘Properties and selection: nonferrous alloys and special-purpose materials’, 2555–2615; 1992, Materials Park, OH, ASM International.
   Google Scholar
• Miracle DB: ‘The physical and mechanical properties of NiAl’, Acta Metall. Mater., 1993, 41, (3), 649–684.
   Google Scholar
• Noebe RD, Bowman RR and Nathal MV: ‘Physical and mechanical properties of the B2 compound NiAl’, Int. Mater. Rev., 1993, 38, (4), 193.
   Web of Science ®Google Scholar
• Fan QX, Jiang SM, Wu DL, Gong J and Sun C: ‘Preparation and hot corrosion behavior of two Co modified NiAl coatings on a Ni–based superalloy’, Corros. Sci., 2013, 76, 373–381.
   Web of Science ®Google Scholar
• Hu L, Hu W, Gottstein G, Bogner S, Hollad S and Bührig-Polaczek A: ‘Investigation into microstructure and mechanical properties of NiAl–Mo composites produced by directional solidification’, Mater. Sci. Eng. A, 2012, A539, 211–222.
   Web of Science ®Google Scholar
• Milenkovic S, Schneider A and Frommeyer G: ‘Constitutional and microstructural investigation of the pseudobinary NiAl-W system’, Intermetallics, 2011, 19, 342–349.
   Web of Science ®Google Scholar
• Bogner S, Hu L, Hollad S, Hu W, Gottstein G and Bührig-Polaczek A: ‘Microstructure of a eutectic NiAl–Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace’, Int. J. Mater. Res. (formerly Z. Metallkd.), 2012, 103, 1.
   Web of Science ®Google Scholar
• Milenkovic S and Caram R: ‘Microstructure of the microalloyed NiAl–V eutectics’, Mater. Lett., 2002, 55, 126–131.
   Web of Science ®Google Scholar
• Palm M, Preuhs J and Sauthoff G: ‘Production-scale of a new intermetallic NiAl–Ta–Cr alloy for high temperature application, Part I’, J. Mater. Process. Technol., 2003, 136, 105–113.
   Web of Science ®Google Scholar
• Sheng L, Wang L, Xi T, Zheng Y and Ye H: ‘Microstructure, precipitates and compressive properties of various holmium doped NiAl/Cr(Mo, Hf) eutectic alloys’, Mater. Des., 2011, 32, 4810–4817.
   Web of Science ®Google Scholar
• Guo JT, Huai KW, Gao Q, Ren WL and Li GS: ‘Effects of rare earth elements on the microstructure and mechanical properties of NiAl–based eutectic alloy’, Intermetallics, 2007, 15, 727–733.
   Web of Science ®Google Scholar
• Schulson EM and Barker DR: ‘A brittle to ductile transition in NiAl of a critical grain size’, Scr. Metall., 1983, 17, 519.
   Google Scholar
• Choudry MS, Eastman JA, DiMelfi RJ and Dollar M: ‘Evidence of room temperature ductility in nanocrystalline NiAl from biaxial disk bend tests’, Scr. Mater., 1997, 37, (6), 843–849.
   Web of Science ®Google Scholar
• Bohn R, Haubold T, Birrinqer R and Gleiter H: ‘Nanocrystalline intermetallic compounds – an approach to ductility?’, Scr. Metall. Mater., 1991, 25, 811–816.
   Google Scholar
• Choudry MS, Dollar M and Eastman JA: ‘Nanocrystalline NiAl–processing, characterization and mechanical properties’, Mater. Sci. Eng. A, 1998, A256, 25–33.
   Web of Science ®Google Scholar
• Moll JH and McTiernan BJ: ‘Powder metallurgy superalloys’, in ‘ASM handbook’, 9th edn, Vol. 7, ‘Powder metal technologies and applications’, 2230–2272; 1998, Materials Park, OH, ASM International.
   Google Scholar
• Suryanarayana C: ‘Mechanical alloying and milling’, Prog. Mater. Sci., 2001, 46, 1–184.
   Web of Science ®Google Scholar
• Pabi SK, Jordar J, Manna I and Murty BS: ‘Nanocrystalline phases in Cu–Ni, Cu–Zn and Ni–Al systems by mechanical alloying’, Nanostruct. Mater., 1997, 9, 149–152.
   Google Scholar
• Kubaski ET, Cintho OM, Antoniassi JL, Kahn H and Capocchi JDT: ‘Obtaining NiAl intermetallic compound using different milling devices’, Adv. Powder Technol., 2012, 23, 667–672.
   Web of Science ®Google Scholar
• Liu E, Jia J, Bai Y, Wang W and Gao Y: ‘Study on preparation and mechanical property of nanocrystalline NiAl intermetallic’, Mater. Des., 2014, 53, 596–601.
   Web of Science ®Google Scholar
• Enayati MH, Karimzadeh F and Anvari SZ: ‘Synthesis of nanocrystalline NiAl by mechanical alloying’, J. Mater. Process. Technol., 2008, 200, 312–315.
   Web of Science ®Google Scholar
• Xu GH, Zhang KF and Huang ZQ: ‘The synthesis and characterization of ultrafine grain NiAl intermetallic’, Adv. Powder Technol., 2012, 23, 366–371.
   Web of Science ®Google Scholar
• Zhou LZ, Guo JT and Fan GJ: ‘Synthesis of NiAl-TiC nanocomposite by mechanical alloying elemental powders’, Mater. Sci. Eng. A, 1998, A249, 103–108.
   Web of Science ®Google Scholar
• Mao SX, McMinn NA and Wu NQ: ‘Processing and mechanical behaviour of TiAl/NiAl intermetallic composites produced by cryogenic mechanical alloying’, Mater. Sci. Eng. A, 2003, A363, 275–289.
   Web of Science ®Google Scholar
• Palm M, Preuhs J and Sauthoff G: ‘Production-scale of a new intermetallic NiAl–Ta–Cr alloy for high temperature application, Part II’, J. Mater. Process. Technol., 2003, 136, 114–119.
   Web of Science ®Google Scholar
• Novak P, Sotka D, Michalcova A, Serak J and Vojtech D: ‘Production of NiAl–matrix composites by reactive sintering’, Powder Metall., 2011, 54, (3), 308–313.
   Web of Science ®Google Scholar
• Cammarota GP and Casagrande A: ‘Effect of ternary additions of iron on microstructure and microhardness of the intermetallic NiAl in reactive sintering’, J. Alloys Compd, 2004, 381, 208–214.
   Web of Science ®Google Scholar
• Bourell DL and Groza JR: ‘Consolidation of ultrafine and nanocrystalline powder’, in ‘ASM handbook’, 9th edn, Vol. 7, ‘Powder metal technologies and applications’, 1176–1209; 1998, Materials Park, OH, ASM International.
   Google Scholar
• Groza JR: ‘Field-activated sintering’, in ‘ASM handbook’, 9th edn, Vol. 7, ‘Powder metal technologies and applications’, 1176–1209; 1998, Materials Park, OH, ASM International.
   Google Scholar
• Udhayabanu V, Ravi KR and Murty BS: ‘Development of in situ NiAl–Al2O3 nanocomposite by reactive milling and spark plasma sintering’, J. Alloys Compd, 2011, 509S, S223–S228.
   Web of Science ®Google Scholar
• Yao M, Zhangjian Z, Jun T and Ming L: ‘Fabrication of ultra-fine grain tungsten by combining spark plasma sintering with resistance sintering under ultra high pressure’, Rare Met. Mater. Eng., 2011, 40, (1), 4–8.
   Web of Science ®Google Scholar
• Orrù R, Licheri R, Locci AM, Cincotti A and Cao G: ‘Consolidation/synthesis of materials by electric current activated/assisted sintering’, Mater. Sci. Eng. R, 2009, R63, 127–287.
   Web of Science ®Google Scholar
• Muñoz-Moreno R, Srinivasarao B, Sabirov I, Ruiz-Navas EM and Torralba JM: ‘Analysis of the temperature effect on the lamellar microstructure transformation of g-TiAl intermetallics processed by field assisted hot pressing’, Proc. Euro PM2012 Cong. Exhibit., Basel, Switzerland, September 2012, Proceeding-Oral.
   Google Scholar
• Muñoz-Moreno R, Ruiz-Navas EM, Srinivasarao B and Torralba JM: ‘Microstructural development of PM Ti-45Al-2Nb-2Mn-0·8 vol.%TiB2 processed by field assisted hot pressing’, J. Mat. Sci. Technol., 2014, in press.
   Google Scholar
• Cullity BD: ‘Elements of X-ray diffraction’, 363–377; 1956, Reading, MA, Addison-Wesley Publishing Company, Inc.
   Google Scholar
• Zhao H, Qiu F, Jin S and Jiang Q: ‘High work-hardening effect of the pure NiAl intermetallic compound fabricated by the combustion synthesis and hot pressing technique’, Mater. Lett., 2011, 65, 2604–2606.
   Web of Science ®Google Scholar