Microstructure and mechanical properties of SiC particles reinforced Mg–8Al–1Sn magnesium matrix composites fabricated by powder metallurgy

References

• K. K. Deng, C. J. Wang, J. Y. Shi, Y. W. Wu and K. Wu: ‘Microstructure evolution mechanism of micron particle reinforced magnesium matrix composite at room temperature’, Mater. Chem. Phys., 2012, 134, 581–584. doi: 10.1016/j.matchemphys.2012.04.010
   Web of Science ®Google Scholar
• K. K. Ajith Kumar, A. Viswanath, T. P. D. Rajan, U. T. S. Pillai and B. C. Pai: ‘Physical, mechanical, and tribological attributes of stir-cast AZ91/SiCp composite’, Acta Metall. Sin., 2014, 27, (2), 295–305. doi: 10.1007/s40195-014-0045-3
   Web of Science ®Google Scholar
• K. K. Deng, K. Wu, Y. W. Wu, K. B. Nie and M. Y. Zheng: ‘Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites’, J. Alloys Compd, 2010, 504, 542–547. doi: 10.1016/j.jallcom.2010.05.159
   Web of Science ®Google Scholar
• M. J. Shen, X. J. Wang, C. D. Li, M. F. Zhang, X. S. Hu, M. Y. Zheng and K. Wu: ‘Effect of submicron size SiC particles on microstructure and mechanical properties of AZ31B magnesium matrix composites’, Mater. Des., 2014, 54, 436–442. doi: 10.1016/j.matdes.2013.08.078
   Web of Science ®Google Scholar
• A. Erman, J. Groza, X. C. Li, H. Choi and G. P. Cao: ‘Nanoparticle effects in cast Mg–1 wt% SiC nano-composites’, Mater. Sci. Eng. A, 2012, A558, 39–43. doi: 10.1016/j.msea.2012.07.048
   Web of Science ®Google Scholar
• M. J. Shen, X. J. Wang, M. F. Zhang, X. S. Hu, M. Y. Zheng and K. Wu: ‘Fabrication of bimodal size SiCp reinforced AZ31B magnesium matrix composites’, Mater. Sci. Eng. A, 2014, A601, 58–64. doi: 10.1016/j.msea.2014.02.035
   Google Scholar
• G. Cao, H. Konishi and X. Li: ‘Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)Al-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing’, Mater. Sci. Eng. A, 2008, A486, 357–362. doi: 10.1016/j.msea.2007.09.054
   Web of Science ®Google Scholar
• H. Watanabe, T. Mukai, M. Mabuchi and K. Higashi: ‘Superplastic deformation mechanism of in powder metallurgy magnesium alloys and composites’, Acta Mater., 2001, 49, 2027–2037. doi: 10.1016/S1359-6454(01)00101-X
   Web of Science ®Google Scholar
• X. J. Wang, K. B. Nie, X. S. Hu, Y. Q. Wang, X. J. Sa and K. Wu: ‘Effect of extrusion temperatures on microstructure and mechanical properties of SiCp/Mg–Zn–Ca composite’, J. Alloys Compd, 2012, 532, 78–85. doi: 10.1016/j.jallcom.2012.04.023
   Web of Science ®Google Scholar
• H. Asgharzadeh, E. Y. Yoon, H. J. Chae, T. S. Kim, J. W. Lee and H. S. Kim: ‘Microstructure and mechanical properties of a Mg–Zn–Y alloy produced by a powder metallurgy route’, J. Alloys Compd, 2014, 586, S95–S100. doi: 10.1016/j.jallcom.2012.10.108
   Web of Science ®Google Scholar
• M. A. Gibson, X. Fang, C. J. Bettle and C. R. Hutchinson: ‘The effect of precipitate state on the creep resistance of Mg–Sn alloys’, Scr. Mater., 2010, 63, 899–902. doi: 10.1016/j.scriptamat.2010.07.002
   Web of Science ®Google Scholar
• J. R. Terbush, N. Stanford, J. F. Nie and M. R. Barnett: ‘Na Partitioning during thermomechanical processing of an Mg-Sn-Zn-Na alloy’, Metall. Mater. Trans. A, 2013, 44A, 5216–5225. doi: 10.1007/s11661-013-1872-y
   Web of Science ®Google Scholar
• S. S. Park and B. S. You: ‘Low-temperature superplasticity of extruded Mg–Sn–Al–Zn alloy’, Scr. Mater., 2011, 65, 202–205. doi: 10.1016/j.scriptamat.2011.04.005
   Web of Science ®Google Scholar
• B. Kim, J. Do, S. Lee and I. Park: ‘In situ fracture observation and fracture toughness analysis of squeeze cast AZ51–xSn magnesium alloys’, Mater. Sci. Eng. A, 2010, A527, 6745–6757. doi: 10.1016/j.msea.2010.07.016
   Web of Science ®Google Scholar
• H. Y. Wang, X. L. Nan, N. Zhang, C. Wang, J. G. Wang and Q. C. Jiang: ‘Strong strain hardening ability in an as-cast Mg–3Al–3Sn alloy’, Mater. Chem. Phys., 2012, 132, 248–252. doi: 10.1016/j.matchemphys.2011.12.036
   Web of Science ®Google Scholar
• A. A. Luo, P. H. Fu, L. M. Peng, X. Y. Kang, Z. Z. Li and T. Y. Zhu: ‘Solidification microstructure and mechanical properties of cast magnesium-aluminum-tin alloys’, Metall. Mater. Trans. A, 2012, 43A, 360–368. doi: 10.1007/s11661-011-0820-y
   Web of Science ®Google Scholar
• L. Lu, K. K. Thong and M. Gupta: ‘Mg-based composite reinforced by Mg2Si’, Compos. Sci. Technol., 2003, 63, 627–632. doi: 10.1016/S0266-3538(02)00203-8
   Web of Science ®Google Scholar
• A. R. Vaidya and J. J. Lewandowski: ‘Effects of SiCp size and volume fraction on the high cycle fatigue behavior of AZ91D magnesium alloy composites’, Mater. Sci. Eng. A, 1996, A220, 85–92. doi: 10.1016/S0921-5093(96)10464-0
   Web of Science ®Google Scholar
• M. Nabeel, R. Frykholm and P. Hedström: ‘Influence of alloying elements on Ni distribution in PM steels’, Powder Metall., 2014, 57, (2), 111–118. doi: 10.1179/1743290113Y.0000000078
   Web of Science ®Google Scholar
• M. Azadbeh, H. Danninger and C. Gierl-Mayer: ‘Particle rearrangement during liquid phase sintering of Cu–20Zn and Cu–10Sn–10Pb prepared from prealloyed powder’, Powder Metall., 2013, 56, (5), 342–346. doi: 10.1179/0032589913Z.000000000138
   Web of Science ®Google Scholar
• H. Y. Wang, Q. C. Jiang, B. X. Ma and F. Zhao: ‘Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy’, Mater. Lett., 2004, 58, 3059–3513.
   Google Scholar
• D. M. Lee, B. K. Suh, B. G. Kim, J. S. Lee and C. H. Lee: ‘Fabrication, microstructures, and tensile properties of magnesium alloy AZ91/SiCp composites produced by powder metallurgy’, Mater. Sci. Technol., 1997, 13, 590–595. doi: 10.1179/mst.1997.13.7.590
   Web of Science ®Google Scholar
• K. B. Nie, X. J. Wang, K. Wu, X. S. Hu, M. Y. Zheng and L. Xu: ‘Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration’, Mater. Sci. Eng. A, 2011, A528, 8709–8714. doi: 10.1016/j.msea.2011.08.035
   Web of Science ®Google Scholar
• A. Bochenek and K. N. Braszczyńska: ‘Structural analysis of the MgAl5 matrix cast composites containing SiC particles’, Mater. Sci. Eng. A, 2000, A290, 122–127. doi: 10.1016/S0921-5093(00)00926-6
   Web of Science ®Google Scholar
• X. J. Wang, N. Z. Wang, L. Y. Wang, X. S. Hu, K. Wu, Y. Q. Wang and Y. D. Huang: ‘Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing’, Mater. Des., 2014, 57, 638–645. doi: 10.1016/j.matdes.2014.01.022
   Web of Science ®Google Scholar
• A. Mazahery, H. Abdizadeh and H. R. Baharvandi: ‘Development of high-performance A356/nano-Al2O3 composites’, Mater. Sci. Eng. A, 2009, A518, 61–64. doi: 10.1016/j.msea.2009.04.014
   Web of Science ®Google Scholar
• J. Zheng, Q. D. Wang, Z. L. Jin and T. Peng: ‘Effect of Sm on the microstructure, mechanical properties and creep behavior of Mg–0.5Zn–0.4Zr based alloys’, Mater. Sci. Eng. A, 2010, 527, 1677–1685. doi: 10.1016/j.msea.2009.10.067
   Web of Science ®Google Scholar