References
- Babakhani A., Haerian A. and Ghambari M.: ‘On the combined effect of lubrication and compaction temperature on properties of iron-based P/M parts’, Mater. Sci. Eng. A, 2006, A437, 360–365. doi: 10.1016/j.msea.2006.08.008
- Hanejko F.: ‘Single press/single sinter solutions to high density’, Powder Metall., 2010, 53, 100–102. doi: 10.1179/174329010X12737422260377
- Poszmik G. and Luk S. H.: ‘Binder treated products for higher densities and better precision’, Adv. Powder Metall., 2003, 3, 3–33.
- Donaldson I. W.: ‘Utilizing an advanced binder system for achieving high densities in hybrid and diffusion-alloyed materials’, Adv. Powder Metall., 2005, 1, 3.
- Bos B., Fors C. and Larsson T.: ‘Industrial implementation of high velocity compaction for improved properties’, Powder Metall., 2006, 49, 107–109. doi: 10.1179/174329006X115975
- Sethi G., Hauck E. and German R. M.: ‘High velocity compaction compared with conventional compaction’, Mater. Sci. Technol., 2006, 22, 955–959. doi: 10.1179/174328406X102354
- Skoglund P.: ‘High density PM parts by high velocity compaction’, Powder Metall., 2001, 44, 199–202.
- Huang P. Y.: ‘Principles of powder metallurgy’, 1997, Beijing, Metallurgical Industry Press.
- Stoyanova V. and Molinari A.: ‘As sintered tensile and impact properties of high density Fe-1.5Cr-0.2Mo sintered steel’, Powder Metall. Prog., 2003, 3, 86–93.
- Nam J., Li W. and Lannutti J. J.: ‘Density gradients and springback: environmental influences’, Powder Technol., 2003, 133, 23–32. doi: 10.1016/S0032-5910(03)00083-4
- Campos M., Blanco L. and Torralba J. M.: ‘Effect of green densification mode on fracture surface micromechanisms in low alloyed molybdenum sintered steels’, Powder Metall. Prog., 2007, 7, 12–19.
- Sethi G., Myers N. S. and German R. M.: ‘An overview of dynamic compaction in powder metallurgy’, Int. Mater. Rev., 2008, 53, 219–234. doi: 10.1179/174328008X309690
- Skoglund P., Kejzelman M. and Hauer I.: ‘High density P/M components by high velocity compaction’, Adv. Powder Metall., 2002, 4, 85–95.
- Wang J. Z., Qu X. H., Yin H. Q., Yi M. J. and Yuan X. J.: ‘High velocity compaction of ferrous powder’, Powder Technol., 2009, 192, 131–136. doi: 10.1016/j.powtec.2008.12.007
- Tang C. Y., Xiao Z. Y., Chen J. and Chao J. L.: ‘Compaction experiment on the newly designed warm high velocity compaction equipment’, Adv. Mater. Res., 2010, 139, 485–488. doi: 10.4028/www.scientific.net/AMR.139-141.485
- Yan Z. Q., Chen F., Cai Y. X., Yin J. and Zheng Y. K.: ‘Preparation and properties of Ti-4.5Al-6.8Mo-1.5Fe alloy by highvelocity compaction’, Powder Technol., 2013, 246, 345–350. doi: 10.1016/j.powtec.2013.05.043
- Blanco L., Campos M., Torralba J. M. and Klint D.: ‘Quantitative evaluation of porosity effects in sintered and heat treated high performance steels’, Powder Met., 2005, 48, 315–322. doi: 10.1179/174329005X82199
- Bos B., Fors C. and Larsson T.: ‘Industrial implementation of high velocity compaction for improved properties’, Powder Metall., 2006, 49, 107–109. doi: 10.1179/174329006X115975
- Majzoobi G. H., Bakhtiari H., Atrian A., Pipelzadeh M. K. and Hardy S. J.: ‘Warm dynamic compaction of Al6061/SiC nanocomposite powders’, Proc. Inst. Mech. Eng. L, 2015, 1464420714566628.
- James W., Narasimhan K. S. and Han F. L.: ‘Warm compaction and warm-die compaction of ferrous PM materials’, Powder Metall. Technol., 2013, 6, 463–474.
- GB/T 228.1-2010. Metallic materials - tensile testing - Part 1: Method of test at room temperature (ISO 6892-1: 2009. MOD). Administration of China; 2011: p. 5–6.
- Guo S. J., Chi Y., Meng F. and Yang X.: ‘Compaction equation for high velocity compact shaping of powder metallurgy’, Mater. Sci. Eng. Powder Metall., 2006, 11, 24–27. doi: 10.1016/j.mseb.2006.02.071
- Eakins D. and Thadhani N. N.: ‘Discrete particle simulation of stress waves propagation in a binary Ni+ Al powder mixture’, J. Appl. Phys., 2007, 101, 043508. doi: 10.1063/1.2431682
- Yi M. J., Yin H. Q., Qu X. H., Wang J. Z., Zhou S. Y. and Yuan X. J.: ‘Influence of force and stress wave on the quality of green compacts in high velocity compaction’, Powder Metall. Technol., 2009, 3, 207–211.