Microstructure and characterizations of one-step forming TiC/Ni₃Al–Ni₃Al multicoating on 316L stainless steel

References

• Suresh B. P., Basu B. and Sundararajan G.: ‘Abrasive wear behavior of detonation sprayed WC-12Co coatings: influence of decarburization and abrasive characteristics’, Wear, 2010, 268, 1387–1399. doi: 10.1016/j.wear.2010.02.013
   Web of Science ®Google Scholar
• Cai B., Tan Y. F., Tu Y. Q., Wang X. L. and Tan H.: ‘Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles’, Trans. Nonferrous Met. Soc. China, 2011, 21, 2426–2432. doi: 10.1016/S1003-6326(11)61031-5
   Web of Science ®Google Scholar
• Li S. P., Feng D., Luo H. L., Zhang X. E. and Cao X.: ‘Development of new wear-resistant surface coating at elevated temperature’, J. Iron Steel Res. Int., 2006, 13, 37–59. doi: 10.1016/S1006-706X(06)60092-7
   Web of Science ®Google Scholar
• Liu X. B, Liu H. Q., Liu Y. F., He X. M., Sun C. F. and Wang M. D.: ‘Effects of temperature and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating’, Compos. Part B Eng., 2013, 53, 347–354. doi: 10.1016/j.compositesb.2013.05.032
   Web of Science ®Google Scholar
• Chen Y. and Wang H. M.: ‘Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating’, Mater. Sci. Eng. A, 2004, A368, 80–87.
   Google Scholar
• Chen H., Xu C., Chen J., Zhao H., Zhang L. and Wang Z.: ‘Microstructure and phase transformation of WC/Ni60B laser cladding coatings during dry sliding wear’, Wear, 2008, 264, 487–493. doi: 10.1016/j.wear.2007.01.132
   Web of Science ®Google Scholar
• Mohammadnezhad M., Shamanian M., Enayati M. H., Salehi M. and Hoseynian A.: ‘Microstructures and properties of NiAl-TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique’, Surf. Coat. Technol., 2014, 238, 180–187. doi: 10.1016/j.surfcoat.2013.10.071
   Web of Science ®Google Scholar
• Fernandes F., Ram A. A., Loureiro A., Guilemany J. M., Torrell M. and Cavaleiro A.: ‘Influence of nanostructured ZrO2 additions on the wear resistance of Ni-based alloy coatings deposited by APS process’, Wear, 2013, 303, 591–601. doi: 10.1016/j.wear.2013.04.012
   Web of Science ®Google Scholar
• Li S., Feng D. and Luo H.: ‘Microstructure and abrasive wear performance of chromium carbide reinforced Ni3Al matrix composite coating’, Surf. Coat. Technol., 2007, 201, 4542–4546. doi: 10.1016/j.surfcoat.2006.09.106
   Web of Science ®Google Scholar
• Pei Y. T. and Zuo T. C.: ‘Gradient microstructure in laser clad TiC-reinforced Ni-alloy composite coating’, Mater. Sci. Eng. A, 1998, A241, 259–263. doi: 10.1016/S0921-5093(97)00501-7
   Web of Science ®Google Scholar
• Wu X. L. and Hong Y. S.: ‘Microstructure and mechanical properties at TiCp/Ni-alloy interfaces in laser-synthesized coatings’, Mater. Sci. Eng. A, 2001, A318, 15–21. doi: 10.1016/S0921-5093(01)01394-6
   Web of Science ®Google Scholar
• Wang S. Q., Li X. X., Chen K. M. and Jin H. J.: ‘TiC/Ni3Al coating on steel via combustion synthesis during casting’, Mater. Lett., 2007, 61, 2531–2534. doi: 10.1016/j.matlet.2006.09.061
   Web of Science ®Google Scholar
• Wei M. X., Wang S. Q, Wang F. and Cui X. H.: ‘A thermal explosion process to fabricate an intermetallic matrix composite coating on a steel’, Mater. Des., 2009, 30, 3041–3047. doi: 10.1016/j.matdes.2008.12.013
   Web of Science ®Google Scholar
• Çalık A.: ‘Interface microstructure of diffusion bonded Ni3Al intermetallic alloy and austenitic stainless steel’, Mater. Lett., 2009, 63, 2462–2465. doi: 10.1016/j.matlet.2009.08.033
   Web of Science ®Google Scholar
• Li Y., Liu Y., Geng H. and Nie D.: ‘Synthesis and cladding of Ni3Al intermetallic on steel substrate by laser controlled reactive synthesis’, J. Mater. Process. Technol., 2006, 171, 405–410. doi: 10.1016/j.jmatprotec.2005.07.009
   Web of Science ®Google Scholar
• Yu Y., Zhou J., Chen J., Zhou H., Guo C. and Guo B.: ‘Preparation, microstructure and tribological properties of Ni3Al intermetallic compound coating by laser cladding’, Intermetallics, 2010, 18, 871–876. doi: 10.1016/j.intermet.2009.12.020
   Web of Science ®Google Scholar
• La P. Q., Bai M. G., Xue Q. J. and Liu W. M.: ‘A study of Ni3Al coating on carbon steel surface via the SHS casting route’, Surf. Coat. Technol., 1999, 113, 44–51. doi: 10.1016/S0257-8972(98)00820-2
   Web of Science ®Google Scholar
• Singh H., Puri D. and Prakash S.: ‘Some studies on hot corrosion performance of plasma sprayed coatings on a Fe-based superalloy’, Surf. Coat. Technol., 2005, 192, 27–38. doi: 10.1016/j.surfcoat.2004.03.030
   Web of Science ®Google Scholar
• Wang C. S.: ‘Influence of yttrium on microstructure and properties of Ni-Al alloy coatings prepared by laser cladding’, Def. Technol., 2014, 10, 22–27. doi: 10.1016/j.dt.2013.12.009
   Google Scholar
• Xu C., Du L., Yang B. and Zhang W.: ‘Study on salt spray corrosion of Ni-graphite abradable coating with 80Ni20Al and 96NiCr-4Al as bonding layers’, Surf. Coat. Technol., 2011, 205, 4154–4161. doi: 10.1016/j.surfcoat.2011.03.007
   Web of Science ®Google Scholar
• Gong K., Zhou Z., Shum P. W., Luo H., Tian Z. and Li C.: ‘Tribological evaluation on Ni3Al-based alloy and its composites under unlubricated wear condition’, Wear, 2011, 270, 195–203. doi: 10.1016/j.wear.2010.10.060
   Web of Science ®Google Scholar
• Karin G., Luo H. L., Feng D. and Li C. H.: ‘Ni3Al-based intermetallic alloys as a new type of high-temperature and wear-resistant materials’, J. Iron Steel Res. Int., 2007, 14, 21–25. doi: 10.1016/S1006-706X(08)60045-X
   Web of Science ®Google Scholar
• Cao G., Geng L., Zheng Z. and Naka M.: ‘The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering’, Intermetallics, 2007, 15, 1672–1677. doi: 10.1016/j.intermet.2007.07.003
   Web of Science ®Google Scholar
• Magdziarz A. and Kalicka Z.: ‘Hot corrosion behaviour of Ni3Al in sulphate-chloride mixtures in the atmosphere’, Corros. Sci., 2007, 49, 1869–1877. doi: 10.1016/j.corsci.2006.10.010
   Web of Science ®Google Scholar
• Lee W. H. and Lin R. Y.: ‘Hot corrosion mechanism of intermetallic compound Ni3Al’, Mater. Chem. Phys., 2002, 77, 86–96. doi: 10.1016/S0254-0584(01)00567-3
   Web of Science ®Google Scholar
• Li Y. X., Hu J. D., Wang H. Y. and Guo Z. X.: ‘Study of TiC/Ni3Al composites by laser ignited self-propagating high-temperature synthesis (LISHS)’, Chem. Eng. J., 2008, 140, 621–625. doi: 10.1016/j.cej.2007.11.034
   Web of Science ®Google Scholar
• Karantzalis A. E., Lekatou A. and Tsirka K.: ‘Solidification observations and sliding wear behavior of vacuum arc melting processed Ni-Al-TiC composites’, Mater. Charact., 2012, 69, 97–107. doi: 10.1016/j.matchar.2012.04.013
   Web of Science ®Google Scholar
• Chen Y. and Wang H. M.: ‘Laser melted TiC reinforced nickel aluminide matrix in situ composites’, J. Alloys Compd, 2005, 391, 49–54. doi: 10.1016/j.jallcom.2004.08.066
   Web of Science ®Google Scholar
• Shi X., Zhai W., Wang M., Xu Z., Yao J. and Song S.: ‘Tribological performance of Ni3Al-15 wt-% Ti3SiC2 composites against Al2O3, Si3N4 and WC-6Co from 25 to 800 °C’, Wear, 2013, 303, 244–254. doi: 10.1016/j.wear.2013.03.034
   Web of Science ®Google Scholar
• Liu Z. D., Tian J., Li B. and Zhao L. P.: ‘Microstructure and mechanical behaviors of in situ TiC particulates reinforced Ni matrix composites’, Mater. Sci. Eng. A, 2010, A527, 3898–3903. doi: 10.1016/j.msea.2010.02.061
   Web of Science ®Google Scholar
• Masahiro I., Katsuaki S. and Koichi N.: ‘Fracture mechanism of Ni3Al alloys and their composites with ceramic particles at elevated temperatures’, Intermetallics, 2000, 8, 365–370. doi: 10.1016/S0966-9795(99)00095-3
   Web of Science ®Google Scholar
• Long J. Z., Zhang Z. J., Xu T., Peng W., We X. Y. and Lu B. Z.: ‘WC-Ni3Al-B composites prepared through Ni+Al elemental powder route’, Trans. Nonferrous Met. Soc. China, 2012, 22, 847–852. doi: 10.1016/S1003-6326(11)61255-7
   Web of Science ®Google Scholar
• Gong K., Luo H., Feng D. and Li C.: ‘Wear of Ni3Al-based materials and its chromium-carbide reinforced composites’, Wear, 2008, 265, 1751–1755. doi: 10.1016/j.wear.2008.04.038
   Web of Science ®Google Scholar
• Singh H., Puri D., Prakash S. and Ghosh T. K.: ‘Hot corrosion of a plasma sprayed Ni3Al coating on a Ni-base superalloy’, Mater. Corros., 2007, 58, 857–866. doi: 10.1002/maco.200704072
   Web of Science ®Google Scholar