References
- A. Cias and A. Czarski: ‘The use of weibull statistics to quantify property variability in Fe–3Mn–0.8C sinter-hardened structurally inhomogeneous steels’, Arch. Metall. Mater., 2013, 58, (4), 1045–1052.
- R. Bidulský, M. Actis Grande, J. Bidulská, M. Vlado and T. Kvačkaj: ‘Wear mechanism of chromium pre-alloyed sintered steel’, High Temp. Mater. Processes, 2009, 28, 175–180.
- S. C. Mitchell and A. Cias: ‘Carbothermic reduction of oxides during nitrogen sintering of manganese and chromium steels’, Powder Metall. Prog., 2004, 4, 132–142.
- A. Cias: ‘Effect of local sintering microatmosphere on mechanical properties of Fe–3Cr–0.5Mo–0.6C steel’, Powder Metall., 2013, 56, (3), 231–238. doi: 10.1179/1743290112Y.0000000048
- I. Forno and M. Actis Grande: ‘Influence of geometry and cooling rate on properties of sinter-hardened steels’, Acta Metall. Slovaca, 2013, 19, 271–281. doi: 10.12776/ams.v19i4.181
- M. Maccarini, R. Bidulsky and M. Actis Grande: ‘Analysis and assessment of powder metallurgy techniques for armour elements production’, Acta Metall. Slovaca, 2012, 18, 69–75.
- E. Dudrová, M. Kabátová, R. Bidulský and A. S. Wronski: ‘Industrial processing, microstructures and mechanical properties of Fe–(2–4)Mn((0,85Mo)–(0,3–0,7)C sintered steels’, Powder Metall., 2004, 47, 181–190.
- R. Bidulsky, M. Actis Grande, M. Kabatova and J. Bidulska: ‘The effect of varying carbon content and shot peening upon fatigue performance of prealloyed sintered steels’, J. Mater. Sci. Technol., 2009, 25, 607–610. doi: 10.1179/174328408X326066
- D. Chasoglou, E. Hryha and L. Nyborg: ‘Effect of process parameters on surface oxides on chromium-alloyed steel powder during sintering’, Mater. Chem. Phys., 2013, 138, 405–415. doi: 10.1016/j.matchemphys.2012.11.074
- ‘Expanding opportunities with chromium’, Met. Powder Rep., 1999, 54, 22–24.
- U. Engström: ‘Influence of the sintering temperature on properties of low alloyed high strength PM materials’, in ‘Advances in powder metallurgy and particulate materials’, (ed. W. B. Eisen and S. Kassam., 204–216; 2001, Princeton, NJ, MPIF.
- K. S. Narasimhan: ‘Recent advances in ferrous powder metallurgy’, Adv. Perform. Mater., 1996, 3, 7–27. doi: 10.1007/BF00136857
- M. Selecká, A. Šalak and H. Danninger: ‘The effect of boron liquid phase sintering on properties of Ni–Mo- and Cr-alloyed structural steels’, J. Mater. Proc. Technol., 2003, 141, 379–384. doi: 10.1016/S0924-0136(03)00421-7
- ‘PM weighed in the balances and found to be economic’, Met. Powder Rep., 2008, 63, 17–19. doi: 10.1016/S0026-0657(08)70038-9
- A. Šalak and M. Selecká: ‘Manganese in powder metallurgy steels’, 2012, Cambridge, Cambridge International Science Publishing.
- R. Bidulský and M. Actis Grande: ‘Wear resistance of Fe (Cr–Mo)–[0–2%Cu]–0.65% C sintered steels: improvement of the characteristics using high temperature and fast cooling’, High Temp. Mater. Processes, 2008, 27, 249–256. doi: 10.1515/HTMP.2008.27.4.249
- J. Bidulská, R. Bidulský and M. Actis Grande: ‘Effect of new type heat treatment on wear characteristics of high-strength sintered steels’, Acta Metall. Slovaca, 2010, 16, 146–150.
- W. B. James: ‘What is sinter-hardening?’, ‘ Advances in Powder Metallurgy and Particulate Materials 1998, MPIF, Las Vegas, Princeton, 1998, presented at special interest session, unpublished’; 1998.
- B. Lindsley: ‘Alloy development of sinter-hardenable compositions’1, ‘Proceedings of the Euro Powder Metallurgy Congress and Exhibition, Euro PM 2007, EPMA, Toulouse’ 107–111; 2007.
- B. Lindsley and W. B. James: ‘Sinter hardening response of a Cr–Si–Ni–Mo containing steel’1, ‘ Euro PM 2005: Powder Metallurgy Congress and Exhibition, EPMA, Prague’, 275–280; 2005.
- B. Lindsley: ‘Sinter-hardening response of leaner alloy systems’, ‘ Advances in Powder Metallurgy and Particulate Materials - 2009, PowderMet 2009, MPIF, Las Vegas’, 785–796; 2009.
- ‘Friction, lubrication, and wear technology’ ‘ASM handbook’, 1992, Materials Park, OH, ASM International.
- E. Dudrová, M. Kabátová, S. Mitchell, R. Bidulský and A. S. Wronski: ‘Microstructure development in Fe–Mn–C compacts resulting from step sintering’, Powder Metall., 2010, 53, 244–250. doi: 10.1179/003258909X12502872942417
- R. Bidulsky, M. Actis Grande, E. Hryha and J. Bidulska: ‘The effect of manganese on microstructure development and diffusion characteristics in admixed Fe–Mn–C sintered steels’3, ‘ Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010’, EPMA, Florence, 2010, code 105571.
- E. Navara: ‘Alloying of sintered steel by manganese’1, ‘ Proc. VIth International PM Conference, ČSSR, Brno’, 143–147; 1982.
- A. Šalak: ‘Diffusion induced grain boundary migration in alloying iron powders with manganese vapours’, Kovove Mater., 1989, 27, 159–170.
- M. Kabatova, E. Dudrova, A. S. Wronski and R. Bidulsky: ‘Fatigue crack initiation and short crack growth in sintered Fe–1.5Cr–0.2Mo–0.7C steel’7, ‘Powder Metall. Prog.’ 20–34; 2007.
- E. Dudrova, M. Kabatova, R. Bures, R. Bidulsky and A. S. Wronski: ‘Processing, microstructure and properties of 2–4% Mn and 0.3/0.7% C sintered steels’, Kovove Mater., 2005, 43, 404–421.
- E. Hryha and L. Nyborg: ‘Oxide transformation in Cr–Mn-prealloyed sintered steels: thermodynamic and kinetic’, Metall. Mater. Trans. A, 2014, 45A, 1736–1747. doi: 10.1007/s11661-013-1969-3
- E. Hryha and L. Nyborg: ‘Process control system for delubrication of PM steels’, Acta Metall. Slovaca, 2012, 18, 60–68.
- E. Hryha, E. Dudrova and L. Nyborg: ‘Critical aspects of alloying of sintered steels with manganese’, Metall. Mater. Trans. A, 2010, 41A, 2880–2897. doi: 10.1007/s11661-010-0357-5
- N. Chawla, T. E. Murphy, K. S. Narasimhan, M. Koopman and K. K. Chawla: ‘Axial fatigue behavior of binder-treated versus diffusion alloyed powder metallurgy steels’, Mater. Sci. Eng. A, 2001, A308, 180–188. doi: 10.1016/S0921-5093(00)01990-0
- A. Simchi and H. Danninger: ‘Effects of porosity on delamination wear behavior of sintered plain iron’, Powder Metall., 2004, 47, 73–80. doi: 10.1179/003258904225015545
- H. Danninger, R. Pöttschacher, S. Bradac, A. Šalak and J. Seyrkammer: ‘Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powders’, Powder Metall., 2005, 48, 23–32. doi: 10.1179/003258905X37567
- M. Campos, D. Sanchez and J. M. Torralba: ‘Sintering behaviour improvement of a low Cr–Mo prealloyed powder steel through Mn additions and others liquid phase promoters’, J. Mater. Process. Technol., 2003, 143–144, 464–469. doi: 10.1016/S0924-0136(03)00459-X
- R. Bidulský, J. Bidulská and M. Actis Grande: ‘Response of the Cr-alloyed PM steels on vacuum sintering and heat treatment’, High Temp. Mater. Processes, 2013, 32, 467–473. doi: 10.1515/htmp-2012-0174
- A. Cias: ‘Chemical reactions during sintering of Fe–Cr–Mn–Si–Ni–Mo–C steels with special reference to processing in semi-closed containers’, Sci. Sinter., 2015, 47, 61–69. doi: 10.2298/SOS1501061C