40
Views
8
CrossRef citations to date
0
Altmetric
Articles

Behaviour of Ir–24 at.-%Ta films on Ni based single crystal superalloys

Pages 53-59 | Published online: 19 Jul 2013

  • R. Mevrel: Mater. Set Eng. A, 1989, 120, 13.
  • C. Leyens, U. Schulz, K. Fritscher, M. Peters and W. A. Kaysser: Metallkd., 2001, 29, 7.
  • M. J. Stiger, N. M. Yanar, M. G. Topping, F. S. Petit and G. H. Meier: Z Metallkd., 1999, 90, 12.
  • A. C. Fox and T. W. Clyne: Proc. 15th Int. ‘Thermal spray’ Conf., 1589; 1998, Metals Park, OH, ASM International.
  • M. Gell, E. Jordan, K. Vaidayanathan, K. Mccarron, B. Barber, Y. H. Sohn and V. K. Tolpygo: Surf Coat. Technol., 1999, 120-121, 53.
  • Y. Itoh and M. Tamura: J. Eng. Gas. Turbines Power (Trans. ASME), 1999, 121, 476.
  • Y. Zhang, J. A. Haynes, W. Y. Lee, I. G. Wright, B. A. Pint, K. M. Cooley and P. K. Liaw: Metall. Mater. Trans. A, 2001, 32, 1727
  • D. He, H. Guan, X. Sun and X. Jiang: Thin Solid Films, 2000, 376, 144.
  • P. Kuppusami and H. Murakami: Surf Coat. Technol, 2004, 186(3), 377.
  • Y. Yamabe-Mitarai, Y. Ro. T. Maruko and H. Harada: Metall. Mater. Trans. A, 1998, 29, 537.
  • E. P. George, C. T. Liu, in: ‘Iridium’, (ed. E. K. Ohriner, R. D. Lanam, P. Panfilov and H. Harada), 3; 2000, Warrendale, PA, The Minerals, Metals and Materials Society.
  • L. Lee, D. Windover, M. Audino, D. W. Matson and E. D. Mcclanahan: Surf Coat. Technol., 2002, 149, 62.
  • C. E. Campbell, W. J. Boettinger and U. R. Kattner: Acta Mater., 2002, 50, 775.
  • Y. Yamabe-Mitarai, M.-H. Hong, Y. Ro and H. Harada: Mag. Lett., 1999, 79 (9), 673.
  • Y. Yamabe-Mitarai, Y. Ro, T. Maruko, T. Yokokawa and H. Harada: ‘Structural intermetallics’, (ed. M. V. Nathal et al), 805; 1997, Warrendale, PA, The Minerals, Metals & Materials Society.
  • Y. Yamabe-Mitarai, Y. Gu, Y. Ro, S. Nakazawa, T. Maruko and H. Harada: in ‘Iridium’, (ed. E. K. Ohriner, R. D. Lanam, P. Panfilov and H. Harada), 41; 2000, Warrendale, PA, The Minerals, Metals and Materials Society.
  • A. Suzuki, F. Wu, H. Murakami and H. Imai: Proc. 7th Liege Conf. ‘Materials for advanced power engineering’, (ed. J. Lecompte-Backers, M. Carton, F. Schubert and P. J. Ennis), Vol. 1, 535; 2002 Julich, Forschungszentrum.
  • F. Wu, H. Murakami and A. Suzuki: Surf Coat. Technol., 2003, 168, 62.
  • T. Gerfin, W. J. Halg, F. Atamny and K. H. Dahmen: Thin Solid Films, 1993, 241, 352.
  • G. K. Reeves, M. W. Lawn and R. G. Elliman: J. Vac. Set Technol. A, 1992, 10, 3203.
  • J. C. Hamilton, N. Y. C. Yang, W. M. Clift, D. R. Boehme, K. F. Mccarty and J. E. Franklin: Metall. Trans. A, 1992, 23, 851.
  • J. S. Cohan, H. Yuan, R. S. Williams and J. I. Zink: AppL Phys. Lett., 1992, 60, 1402.
  • M. A. El khakani, B. Le drogoff and M. Chaker: J. Mater. Res., 1999, 14(8), 3241.
  • K. Mumtaz, J. Echigoya and M. Taya: J. Mater. Sci., 1993, 28, 5521.
  • K. Mumtaz, J. Echigoya, T. Hirai and Y. Shindo: Mater. Set Eng. A, 1993, 187.
  • M. A. El khakani, M. Chaker and B. Le drogoff: J. Vac. Set Technol. A, 1998, 16(2), 885.
  • H. Hahn and R. S. Averback: J. Appl. Phys., 1990, 67, 1113.
  • J. L. Vossen and J. J. Cuomo: ‘Glow discharge sputter deposition’, (ed. J. L. Vossen and W. Kern), 16; 1978, New York, Academic Press.
  • P. Kuppusami, H. Murakami and T. Ohmura: ‘Surface engineering in materials science II’, (ed. S. Seal, N. B. Dahotre, J. Moore, S. Suryanarayana and A. Agarwal), Proc. Symp. on ‘Surface engineering in materials science II’, TMS-2003, San Diego, 2-6 March, 309; 2003, Warrendale, PA, The Minerals, Metals & Materials Society.
  • S. Matsuoka, K. Tanaka and T. Yoshida: Thin Solid Films, 2001, 385, 198.
  • C. Oliver and G. M. Pharr: J. Mater. Res., 1992, 7, 1564.
  • ‘Powder diffraction file’, Joint Committee on Powder Diffraction Standards, ASTM, Philadelphia, PA, 1967, Card No. 6-0598.
  • ‘Powder diffraction file’, Joint Committee on Powder Diffraction Standards, ASTM, Philadelphia, PA, 1967, Card No. 17-0036.
  • T. Yokokawa, M. Osawa, H. Murakami, T. Kobayashi, Y. Koizumi, T. Yamagata and H. Harada: Proc. ‘Materials for advanced power engineering’, (ed. J. Lecompte-Beckers, F. Schubert and P. J. Ennis), Vol. 5, Part II, 1121; 1998, Julich, Forschungszentrum.
  • T. B. Massalski: ‘Binary alloy phase diagrams’, Vol. 3, 2355; 1990, Metals Park, OH, ASM International.
  • H. N. Al-shareef, K. D. Gifford, S. H. Rou, P. D. Hren, O. Auciello and A. I. Kingon: Intergrat. Ferroelect., 1993, 3, 321.
  • J. R. Davis et al. (eds.): ‘Metals handbook’, Vol. 2, 557; 1990, Metals Park, OH, ASM International.
  • C. Leyens, U. Schulz, B. A. Pint and I. G. Wright: Surf Coat. Technol., 1999, 120-121, 68.
  • S. Wollmer, S. Zaefferer, M. Goken, T. Mack and U. Glatzel: Surf Coat. Technol., 2003, 167, 83.
  • H. Hosoda, S. Miyazaki and S. Hanada: Intermetallics, 2000, 8, 1081.
  • P. Kuppusami and V. S. Raghunathan: Int. Mater. Rev., 2003, 48, 1.
  • V. Jeschke, R. Schneider, G. Ulmer and G. Linker: Physica C, 1995, 243, 243.
  • R. Saha and J. A. Barnard: J. Cryst. Growth, 1997, 174, 495.
  • P. Kuppusami, H. Murakami and T. Ohmura: J. Vac. Set Technol, 2004, 22, 1208.
  • P. Kuppusami and H. Murakami: Trans. Indian Inst. Metals, 2004, 57, 491.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.