References
- W. F. Savage and E. S. Szekeres: Weld. J., 1967, 46, 94s.
- W. F. Savage, E. F. Nippes and E. S. Szekeres: Weld. J., 1976, 55, 260s.
- D. S. Duvall and W. A. Owczarski: Weld. J., 1968, 47, 115s.
- L. P. Kadalainen: Z. Metallkd, 1979, 70, 686.
- T. Doody: Weld. J., 1992, 61, 55.
- F. Ornath, J. Soudry, B. Z. Weiss and I. Minkoff: Weld. J., 1991, 60, 227s.
- G. Kotsikos, J. M. Sutcliffe and N. J. H. Holroyd: Corros. Sci., 2000, 42, 17–33.
- A. A. Omar: Weld. J., 1998, 67, 86s.
- J. C. Lippold and W. F. Savage: Weld. J., 1980, 59, 48s.
- S. K. Albert, T. P. S. Gills, A. K. Tyagi, S. L. Mannan, S. D. Kulkarni and P. Rodriguez: Weld. J., 1997, 66, 135s.
- T. G. Gooch and A. C. Elbro: Proc. Conf. on ‘Corrosion in natural and industrial environments: problems and solutions’, Grado, Italy, May 1995, NACE Italia, Paper 13.
- L. Friedersdorf: ‘Susceptibility of AL–6XN gas tungsten arc weldments to localized corrosion’, Advanced Technology for Large Structural Systems (ATLSS) ATLSS Report no. 03–09, Lehigh University, 2003, 90
- W. A. III Baeslack, J. C. Lippold and W. F. Savage: Weld. J., 1979, 58, 168s.
- M. C. Reboul, B. Dubost and M. Lashermes: Corros. Sci., 1985, 11, (25), 999–1018.
- S. S. Birley: Proc. Conf. on ‘Environmental degradation of engineering materials III’, 281; 1987, University Park, PA, Pennsylvania State University.
- K. G. Kent: Metall. Rev., 1970, 15, 135–140.
- H. Yunjia, G. Dalu, S. Zhixiong Proc. Conf. on ‘Aluminum- lithium III’, 1215–1220; 1986, London, Institute of Metals.
- A. Gutierrez and J. C. Lippold: Weld. J., 1998, 77, (3), 123s–132s.
- G. M. Reddy, A. A. Gokhale, K. S. Prasad and K. P. Rao: Sci. Technol. Weld. Join., 1998, 3, (4), 208–212.
- D. C. Lin, G.-X. Wang and T. S. Srivatsan: Mater. Sci. Eng. A, 2003, A351, 304–309.
- D. K. Aidun and J. P. Dean: Weld. J., 1999, 69, 349s–354s.
- A. F. Norman, P. B. Pragnell and R. S. McEwen: Acta Mater, 1998, 46, 5715–5732.
- C. E. Cross, L. W. Loechel and G. F. Braun: Proc. 6th Int. Al–Li Conf., 1165; 1991, Oberusel, Deutsche Gesellschaft fur Materialkunde.
- A. Gutierrez, J. C. Lippold and W. Lin: Mater. Sci. Forum, 1996, 217–222, 1691.
- M. F. Lee, J. C. Huang and N. J. Ho: J. Mater. Sci., 1996, 31, 1455.
- S. Kumar, H. B. McShane and T. Sheppard: Mater. Sci. Technol., 1994, 10, 162.
- S. Dev and K. P. Rao: Studies on fusion boundary of aluminium alloys, Unpublished research work, 2005.
- B. P. Gu, G. L. Liedl, T. H. Sanders, Jr and K. Welpmann: Mater. Sci. Eng., 1985, 76, 147.
- S. Kou and Y. Le: Weld. J., 1985, 64, 51.