- P. Chivavibul, M. Watanabe, S. Kuroda and K. Shinoda: Surf Coat. Technol., 2007, 202, 509–521.
- D. A. Steward, P. H. Shipway and D. G. MacCartney: Acta mater., 2000, 48, 1593–1604.
- J. M. Guilemany, S. Dosta, J. Nin and J. R. Miguel: J. Therm. Spray Technol., 2005, 14, (3), 405–413.
- Q. Yang, T. Senda and A. Ohmori: Wear, 2003, 254, 23–24.
- E. S. Puchi-Cabrera, R. Maccio and M. H. Staia: Surf Eng., 2006, 22, (4), 253–262.
- B. D. Sartwell, K. O. Legg, A. Nardi, R. Kestler, W. Assink and J. Schell: ‘Replacement of chromium electroplating on C-2, E-2, P-3 and C-130 propeller hub components using HVOF thermal spray coatings’, Report NRL/MR/6170-04-8763, Naval Research Laboratory, Washington, DC, USA, 2004.
- G. Bolelli, L. Lusvarghi, F. Pighetti Mantini, M. Barletta and F. Casadei: Surf Eng., 2007, 23, (5), 355–372.
- L. E. Gil and M. H. Staia: Surf Eng., 2002, 18, (4), 309–315.
- M. H. Staia and E. Carrasquero: Surf Eng., 2000, 16, (6), 515–518.
- A. C. Savarimuthu, I. Megat, H. F. Taber, J. R. Shadley, E. F. Rybicki, W. A. Emery, J. D. Nuse and D. A. Somerville: Proc. 1st Int. Thermal Spray Conf. (ITSC 2000), Canada, 2000, 1095-1104.
- J. M. Guilemany, J. M. Miguel, S. Vizcaino and F. Climent: Surf Coat. Technol., 2001, 140, 141–146.
- J. M. Perry, A. Neville and T. Hodgkiess: J. Therm. Spray Technol., 2002, 11, (4), 536–541.
- E. Celik, O. Culha, B. Uyulgan, N. F. AkAzem, I. Ozdemir and A. Turk: Surf Coat. Technol., 2006, 200, 4320–4328.
- A. Kulkarni, J. Gutleber, S. Sampath, A. Goland, W. B. Lindquist, H. Herman, A. J. Allen and B. Dowd: Mater. Sci Eng. A, 2004, A369, 124-137.
- R. S. Lima, S. E. Kruger, G. Lamouche and B. R. Marple: J. Therm. Spray Technol., 2005, 14, (1), 52–60.
- R. S. Lima and B. R. Marple: Acta Mater., 2004, 52, 1163–1170.
- A. Bolshakov and G. M. Pharr: J. Mater. Res., 1998, 13, (4), 1049–1058.
- W. C. Oliver and G. M. Pharr: J. Mater. Res., 1992, 7, (6), 1564-1583.
- W. C. Oliver and G. M. Pharr: J. Mater. Res., 2004, 19, (1), 3–20.
- A. Fischer-Cripps: 'Nanoindentation'; 2002, New York, Springer-Verlag.
- ‘Standard test methods for determining area percentage porosity in thermal sprayed coatings’, E 2109-01, ASTM, Philadelphia, PA, USA, 2007.
- D. B. Marshall, T. Noma and A. G. Evans: J. Am. Ceram. Soc., 1982, 65, (10), C175–176.
- H. L. Villiers Lovelock, P. W. Richter, J. M. Benson and P. M. Young: J. Thermal. Spray Technol, 1998, 7, (1), 97–107.
- Y. Y. Santana, P. O. Renault, M. Sebastiani, J. Lesage, E. Bemporad, E. Le Bourhis, E. S. Puchi-Cabrera and M. H. Staia: Surf Coat. Technol., 2008, 202, 4560–4565.
- M. N. Haller: in `ASM handbook', Vol. 9, `Metallography and microstructures', 513-518; 1998, Materials Park, OH, ASM International.
- E. Kimmari and L. Kommel: Proc. Est. Acad. Sci Eng., 2006, 12, (4), 399–407.
- J. Li and C. Ding: Surf Coat. Technol., 2001, 135, 229–237.
- Y. Li and K. A. Khor: Surf Coat. Technol., 2002, 150, 143–150.
- J. G. La Barbera-Sosa, Y. Y. Santana, M. H. Staia, D. Chicot, J. Lesage, J. Caro, G. Mesmacque and E. S. Puchi-Cabrera: Surf Coat. Technol., 2008, 202, 4552–4559.
- G. Bolelli, V. Cannillo, L. Lusvarghi and S. Ricco: Surf Coat. Technol., 2006, 200, 2995–3009.
- M. Factor, and I. Roman: Proc. 1st Int. Conf. on ‘Thermal spray’, 1345-1354; 2000, Montréal, ASM International.
- G. Skandan, M. JaM, T. E. Fischer, B. H. Kear, W. R. Rigney, R. Shropshire and S. Brunhouse: in: ‘Thermal spray: surface engineering via applied research’, (ed. C. C. Berndt), 971-976; 2000, Materials Park, OH, ASM International.
- G. Bolelli, V. Cannillo, L. Lusvarghi and T. Manfredini: Wear, 2006, 261, 1298–1315.
- M. M. Lima, C. Godoy, P. Modenesi, J. C. Avelar-Batista, A. Davison and A. Matthews: Surf Coat. Technol., 2004, 177-178, 489-496.
- E. Lopez-Cantera and B. G. Mellor: Mater. Lett., 1998, 37, 201–210.
- A. Leyland and A. Matthews: Wear, 2001, 246, 1–11.
Mechanical properties and microstructure of WC–10Co–4Cr and WC–12Co thermal spray coatings deposited by HVOF
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.