Advanced search
Publication Cover
Surface Engineering Volume 26, 2010 - Issue 1-2: In memory of Tom Bell
Journal homepage
112
Views
27
CrossRef citations to date
0
Altmetric
Articles

Coatings tribology drivers for high density plasma technologies

P. A. DearnleyiETSISchool of Mechanical Engineering, University of Leeds, Leeds, UK
,
A. NevilleiETSISchool of Mechanical Engineering, University of Leeds, Leeds, UK
,
S. TurnerAMRCSheffield, UK
,
H.-J. ScheibeFraunhofer Institue for Material and Beam Technology (IWS)Winterbergstrasse28, 01277 Dresden, Germany
,
R. TietemaHauzerTechno Coating BV, Van Heemskerckweg 22, 5928 LL Venlo, The Netherlands
,
R. TapIna-Schaeffler KGIndustriestrasse1-3, 91074 Herzogenaurach, Germany
,
M. StüberInstitute for Materials ResearchKarlsruhe, Germany
,
P. HovsepianSheffield Hallam UniversitySheffield, UK
,
A. LayyousIscar ToolsBox11, Tefen 24959, Israel
&
B. StenbomVolvo Technology Corp.Dept6330 Sven Hultins gata 9A SE-412 88, Gothenburg, Sweden
 show all
Pages 80-96 | Published online: 19 Jul 2013

  • T. Bell: ‘Survey of heat treatment in the UK’; 1972, London, Institute of Metals.
  • T. Bell and V. Korotchenko: ‘Industry makes strong commitment to plasma heat treatment process’, Electrical Times, 23 November 1979.
  • D. N. H. Trafford, T. Bell, J. H. P. C. Megaw and A. S. Bransden: ‘Heat treatment using a high power laser’, in Proc. Conf. Heat Treatment ‘79, Book 261, 32-38; 1980, London, The Metals Society.
  • T. Bell and P. A. Dearnley: ‘Environmental issues in surface engineering and related industrial sectors’, Surf Eng., 1994, 10, (2), 123–128.
  • Z. L. Zhang and T. Bell: Surf Eng., 1985, 1 (2), 131–137.
  • P. A. Dearnley, A. Navar, G. G. A. Hibberd and T. Bell: ‘Some observations on plasma nitriding austenitic stainless steel’, in ‘Plasma surface engineering’, Vol. 1, 219-226; 1989, Oberursel, DGM.
  • X. Y. Li, N. Habibi, T. Bell and H. Dong: `Microstructural characterisation of a plasma carburised low carbon C—Cr alloy’, Surf Eng., 2007, 23, (1), 45–51.
  • A. Bloyce: ‘Guest editorial’, Surf Eng., 1997, 13, (2), 89–90.
  • A. Bloyce: ‘Surface engineering in motorsport for improved performance’, Surf Eng., 2010, 26, (1).
  • T. Bell:‘Editorial’, Surf Eng., 1997, 13, (5), 345–346.
  • T. Bell: ‘Surface engineering: its current and future impact in Tribology’, J. Phys. D, 1992, 25D, A297—A306.
  • P. A. Dearnley: ‘A review of Metallic, ceramic and surface treated metals used for bearing surfaces in human joint replacements’, Proc. Inst. Mech Eng. H, 1999, 213H, 107–135.
  • R. Hauert: ‘An overview of the Tribological behaviour of diamond like carbon in technical and medical Applications’, Tribol Int., 2004, 37, 991–1003.
  • R. Hauert: ‘A review of modified DLC coatings for biological Applications’, Diamond Relat. Mater., 2003, 12, 583–589.
  • R. Ji, X. Li and H. Dong: ‘Ceramic conversion treatment of zirconium alloys to combat corrosion-wear’, Surf Eng., 2010, 26, (1).
  • AE Goetze GmbH: ‘Piston ring manual’; 1995, Burscheid, AE Goetze GmbH.
  • J. Robertson: ‘Diamond-like amorphous carbon’, Mater. Sci. Eng. R, 2002, R37, 129-281.
  • A. A. Voevodin, A. W. Phelps, J. S. Zabinski and M. S. Donley: ‘Friction induced phase transformation of pulsed laser deposited diamond-like carbon’, Diamond Relat. Mater., 1996, 5, 1264–1269.
  • S. Neuville and A. Matthews: ‘A perspective on the optimisation of hard carbon and related coatings for engineering Applications’, Thin Solid Films, 2007, 515, 6619-6653.
  • S. V. Hainsworth and N. J. Uhure: ‘Diamond like carbon coatings for Tribology: production techniques, characterisation methods and Applications’, Int. Mater. Rev., 2007, 52, (3), 153–174.
  • Y. Mabuchi, M. Kano, T. Hamada and Y. Yasuda: ‘The development of diamond like carbon coated valve lifters for engine friction reduction’, in ‘Synopses of the International Tribology Conference’, A-5; 2005, Kobe, Japanese Society of Tribologists.
  • C. Donnet and A. Grill: ‘Friction control of diamond-like carbon coatings’, Surf Coat. Technol. , 1998, 94-95, 456-462.
  • J. Fontaine, C. Donnet, A. Grill and T. LeMogne: `Tribochemistry between hydrogen and diamond-like carbon films’, Surf Coat. Technol, 2001, 146-147, 286.
  • X. L. Peng and T. W. Clyne: ‘Residual stress and debonding of DLC films on Metallic substrates’, Diamond Relat. Mater., 1998, 7, (7), 944–950.
  • A. Atkinson: ‘Generation and relief of stress in ceramic films’, in ‘Ceramic films and coatings’, (ed. W. E. Lee), 1-14; 1995, London, The Institute of Materials.
  • V. Weinacht and H.-J. Scheibe: ‘Friction and wear behaviour of modified diamond like carbon’, Proc. 16th Int. Colloq. on Tribology, Esslingen, Germany, January 2008, TAE.
  • M. Ban, M. Ryoji, S. Fujii and J. Fujioka, ‘The Tribological characteristics of Si containing diamond like carbon under oil lubrication’, Wear, 2002, 253, 331–338.
  • F. Ledrappier, L Houze and C. Heau: ‘A comparison of the Tribology of tetrahedral amorphous carbon and hydrogenated amorphous carbon’, Proc. 16th Int. Colloq. on Tribology, Esslingen, Germany, January 2008, TAE.
  • K. Enke, H. Dimigen and H. Hubsch: ‘Frictional properties of diamondlike carbon layers’, Appl Phys. Lett., 1980, 36, (34), 291–292.
  • M. Woydt: Plenary paper `Triboactive materials for zero wear under dry sliding up to 800C and mixed lubrication’, Proc. 16th Int. Colloq. on Tribology, Esslingen, Germany, January 2008, TAE.
  • H. Moritani: European Patent 1783349A1, 2007.
  • M. Boghe: ‘Lower emissions with DLC coatings’, ATZ Autotechnot, 2009, 9, (2), 38–41.
  • R. H. Savage: ‘Graphite lubrication’, J. Appl Phys., 1948, 19, (1), 1–10.
  • A. Neville, A. Morina, T Hague and M. Voong: ‘Compatibility between Tribological surface and lubricant additives’, Tribot Int., 2007, 40, 1680–1695.
  • H. Spikes: ‘The history and mechanisms of ZDDP’, Tribol Lett., 2004, 17, (3), 469–489.
  • A. M. Barnes, K. D. Bartle and V. R. A. Thibon: Tribol Int., 2001, 34, 389–395.
  • M. I. de Barros Bouchet, J. M. Martin, T. Le-Mogne and B. Vacher: ‘Boundary lubrication mechanisms of carbon coatings by MoDTC and ZDDP additives’, Tribot Int., 2005, 38, 257–264.
  • C. Grossiord, K. Varlot, J.-M. Martin, Th. Le Mogne, C. Esnouf and K. Inoue: ‘Mo52 single sheet lubrication by molybdenum dithiocarbamate’, Tribol Int., 1999, 31, 737–743.
  • Z. Pawlak: `Tribochemistry of lubricating oils’, 121-223; 2003, Amsterdam, Elsevier.
  • A. Morina, A. Neville, M. Priest and J. H. Green: `ZDDP and MoDTC interactions and their effect on Tribological performance’, Tribol Lett., 2006, 24, (3), 243–256.
  • T. Hague, A Morina, A. Neville, R. Kapadia and S. Arrowsmith: Non-Ferrous coating/lubricant interactions in Tribological con-tacts: assessment of tribofilms’, Tribot Int., 2007, 40, 1603–1612.
  • W.-D. Muenz, M. I. Lembke, B. D. Lewis and J. I. Smith: ‘Microstructure, composition and performance of PVD coatings designed for successful dry high speed milling’, Proc. 15th Int. Plansee Sem. 2001, Tyrol, Austria, May—June 2001, Plansee AG, 11.
  • E. M. Trent and P. K. Wright: ‘Metal cutting’, 4th edn; 2000, London, Butterworth-Heinemann.
  • P. A. Dearnley: ‘New technique for determining temperature distribution in cemented carbide cutting tools’, Met. TechnoL, 1983, 10, 205–211.
  • P. A. Dearnley and A. N. Grearson: ‘The principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318’, Mater. Sci. Technot, 1986, 2, 47–58.
  • P. A. Dearnley, M. Schellewald and K. L. Dahm: ‘Characterisation and wear response of metal-boride coated WC—Co’, Wear, 2005, 259, 861–869.
  • M. Samandi, T. Bell and P. A. Dearnley: in ‘Surface modification technologies’, (ed. T. S. Sudarshan and J. F. Braza), 705-717; 1993, London, TMS.
  • P. A. Dearnley: ‘Rake and flank wear mechanisms of coated cemented carbides’, Surf Eng., 1985, 1, 15–20.
  • P. A. Dearnley, R. F. Fowle, N. M. Corbett and E. D. Doyle: ‘Wear mechanisms of physical and chemical vapour deposited ceramic coatings’, Surf Eng., 1993, 9, 312–318.
  • P. A. Dearnley: ‘A Metallurgical evaluation of tool wear’, Wear, 1985, 101, 33–68.
  • E. M. Trent: ‘Wear processes which control the life of cemented carbide cutting tools’, in ‘Materials for metal cutting’, ISI Publication 126, 15-20; 1970, London, ISI.
  • I. Reineck, M. E. Sjostrand, J. Karner and M. Pedrazzini: ‘Diamond coated cutting tools’, Int. J. Refract. Met. Hard Mater., 1996, 14, 187–193.
  • I. Reineck, M. E. Sjostrand, J. Karner and M. Pedrazzini, 11CDCA diamond coated cutting tools’, Diamond Relat. Mater., 1996, 5, 819–824.
  • M. Dai, K. Zhou, Z. Yuan, Q. Ding and Z. Fu: ‘The cutting performance of diamond and DLC coated cutting tools’, Diamond Relat. Mater., 2000, 9, 1753–1757.
  • J. M. Burkes and M. R. Lesher: ‘Advanced tooling and technology for drilling metal matrix composite materials’, in ‘Machining of composite materials II’, (ed. T. S. Srivatsan et al.), 31-42; 1994, Materials Park, OH, ASM International.
  • C. Lane: in `Machinability of aluminium composites as a function of matrix alloy and heat treatment’, (ed. T. S. Srivatsan and D. M. Bowden), 3-15; 1992, Materials Park, OH, ASM International.
  • C. Lane: in ‘The effect of different reinforcements on PCD tool life for aluminium composites’, (ed. T. S. Srivatsan and D. M. Bowden), 17-28; 1992, Materials Park, OH, ASM International.
  • J. M. Dasch, C. C. Ang, C. A. Wong, Y. T. Cheng, A. M. Winer, L. C. Lev and E. Konca: ‘A comparison of five categories of carbon based tool coatings for dry drilling of aluminium’, Surf Coat. TechnoL, 2006, 200, 2970–2977.
  • U. Buran, H. C. Mader, M. Morsbach and B. A. Newman: ‘Plasma sprayed coatings for piston rings — state of development and Applications potential’, in ‘Surface modifications and coatings’, (ed. R. D. Sisson), 255-264; 1986, Materials Park, OH, ASM International.
  • W. J. Griffiths and F.-G. Cantow: ‘Piston and ring technology for medium speed diesel and gas engines’, Proc. T&N Technical Symp., Würzburg, IN, USA, February 1995, T&N Plc, Paper 23.
  • European Patent 0217126.
  • J.-G. Kim, K.-R. Lee and S.-J. Yang: ‘Wear-corrosion perfor-mance of Si—DLC coatings on Ti-6A1-4V substrate’, J. Biomed. Mater. Res. A, 2008, 86A, 41–47.
  • D. Yonekura, R. J. Chittenden and P. A. Dearnley: ‘Wear mechanisms of steel roller bearings protected by thin, hard and low friction coatings’, 2005, Wear, 259, 779-788.
  • R. J. Chittenden and P. A. Dearnley: Unpublished research, 2006.
  • A. Elwafi, R. J. Chittenden, D. C. Barton and P. A. Dearnley: ‘Failure of coated engineering steels under lubricated rolling/sliding conditions’, Proc. 35th Leeds-Lyon Symp. on `Tribology’, Leeds, UK, September 2008, Trinity and all Saints College, Paper XXI.
  • R. J. Chittenden, A. Elwafi, D. C. Barton and P. A. Dearnley: Unpublished Research, University of Leeds, Leeds, UK, 2007-2009.
  • B. F. Coll and P. Jacquot: ‘Surface modification of medical implants and surgical devices using TiN layers’, Surf Coat. TechnoL, 1988, 36, 867–878.
  • M. J. Pappas and F. F. Buechel: ‘Prosthesis with biologically inert wear resistant surface’, European Patent 0573694A2, 1992.
  • C. D. Peterson, B. M. Hillerby and D. A. Heck: ‘Component wear of total knee prostheses using titanium nitride coated Ti-6A1-4V and cobalt—chromium—molybdenum femoral components’, J. Biomed Mater. Res., 1988, 22, 887–903.
  • J. Franks: European Patent 0302717, 1989.
  • H. R. Shetty and W. H. Ottersberg: ‘Method of surface hardening cobalt—chromium based alloys for orthopaedic devices’, US Patent 5308412, 1994.
  • J. Fisher: US Patent 20050033442, 2005.
  • J. Fisher, X. Q. Hu, J. L. Tipper, T. D. Stewart, S. Williams, M. H. Stone, C. Davies, P. Hatto, J. Bolton, M. Riley, C. Hardaker, G. H. Isaac, G. Berry and E. Ingham: ‘An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads’, Proc. Inst. Mech. Eng. H, 2002, 216H, 219–230.
  • G. Taeger, L. E. Podleska, B. Schmidt, M. Ziegler and D. Nast-Kolb: ‘Comparison of diamond-like-carbon and alumina-oxide articulating with polyethylene in total hip arthroplasty’, Materialwiss. Werkstofftech., 2003, 34, (12), 1094–110.
  • P. A. Dearnley and G. Aldrich-Smith: ‘Corrosion-wear mechan-isms of hard coated austenitic 316L stainless steels’, Wear, 2004, 256, (5), 491–499.
  • C. Bauer, H. Leiste, M. Sdiber, S. Ulrich and H. Holleck: ‘Constitution, microstructure, mechanical properties and perfor-mance of magnetron sputtered carbon films with additions of silicon’, Materialwiss. Werkstofftech., 2003, 34, (10/11), 912-918.
  • L. Niederberger, H. Holleck, H. Leiste, M. Stüber, S. Ulrich and H. Baumann: ‘Alloyed hydrogenated diamond like carbon thin films deposited by a new high performance microwave low pressure plasma source’, Surf Coat. TechnoL, 2003, 174-175, 708-712.
  • A. Bendavid, P. J. Martin, C. Comte, E. W. Preston, A. J. Haq, F. S. Magdon Ismail and R. K. Singh: ‘The mechanical and biocompatibility of DLC—Si films prepared by pulsed DC plasma activated chemical vapour deposition’, Diamond Relat. Mater., 2007, 16, 1616–1622.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.