Improvement of properties of TiN coating by optimising microstructural design

References

• Chicot D., Marot G., Araujo P., Horny N., Tricoteaux A., Staia M. H. and Lesage J.: ‘Effect of some thermal treatments on interface adhesion toughness of various thick thermal spray coatings’, Surf. Eng., 2006, 22, 390–398.
   Web of Science ®Google Scholar
• Damaschek R., Strydom I. L. and Bergmann H. W.: ‘Improved adhesion of TiN deposited on prenitrided steels’, Surf. Eng., 1997, 13, 128–132.
   Google Scholar
• Chen C. Z., Li Q., Leng Y. X., Chen J. Y., Zhang P. C., Bai B. and Huang N.: ‘Improved hardness and corrosion resistance of iron by Ti/TiN multilayer coating and plasma nitriding duplex treatment’, Surf. Coat. Technol., 2010, 204, 3082–3086.
   Web of Science ®Google Scholar
• Lee C. Y., Dupeux M. and Tuan W. H.: ‘Cross-sectional indentation technique for thick film interfacial adhesion characterisation’, Surf. Eng., 2009, 25, 97–100.
   Web of Science ®Google Scholar
• Liu Y. Y., Yu J., Huang H., Xu B. H., Liu X. L., Gao Y. and Dong X. L.: ‘Synthesis and tribological behavior of electroless Ni–P–WC nanocomposite coatings’, Surf. Coat. Technol., 2007, 201, 7246–7251.
   Web of Science ®Google Scholar
• Luo Q., Rainforth W. M. and Münz W. D.: ‘TEM observations of wear mechanisms of TiAlCrN and TiAlN/CrN coatings grown by combined steered-arc/unbalanced magnetron deposition’, Wear, 1999, 225–229, 74–82.
   Web of Science ®Google Scholar
• Abubakar T., Rahman M., Dowling D. P., Stokes J. and Hashmi M. S. J.: ‘Adhesion performance of TiN coating with amorphous NiTi alloy interlayer onto 316L stainless biosteel deposited by sputtering process’, Surf. Eng., 2010, 26, 499–505.
   Web of Science ®Google Scholar
• He Y., Apachitei I., Zhou J., Walstock T. and Duszczyk J.: ‘Effect of prior plasma nitriding applied to a hot-work tool steel on the scratch-resistant properties of PACVD TiBN and TiCN coatings’, Surf. Coat. Technol., 2006, 201, 2534–2539.
   Web of Science ®Google Scholar
• Subramanian B., Ashok K., Subramanian K., Sastikumar D., Selvan G. and Jayachandran M.: ‘Evaluation of corrosion and wear resistance titanium nitride (TiN) coated on mild steel (MS) with brush plated nickel interlayer’, Surf. Eng., 2009, 25, 490–495.
   Web of Science ®Google Scholar
• Caicedo J. C., Amaya C., Yate L., Nos O., Gomez M. E. and Prieto P.: ‘Hard coating performance enhancement by using [Ti/TiN]n, [Zr/ZrN]n and [TiN/ZrN]n multilayer system’, Mater. Sci. Eng. B, 2010, B171, 56–61.
   Web of Science ®Google Scholar
• Zoestbergen E., Carvalho N. J. M. and De Hosson J. T. M.: ‘Stress state or TiN/TiAlN PVD multilayers’, Surf. Eng., 2001, 17, 29–34.
   Web of Science ®Google Scholar
• Yao S. H., Su Y. L., Kao W. H. and Cheng K. W.: ‘TiN–AlN nanomultilayer films for microdrilling and machining’, Surf. Eng., 2005, 21, 307–314.
   Web of Science ®Google Scholar
• Zhao S. S., Du H., Hua W. G., Gong J., Li J. B. and Sun C.: ‘The depth distribution of residual stresses in (Ti,Al)N films: measurement and analysis’, J. Mater. Res., 2007, 22, 2659–2662.
   Web of Science ®Google Scholar
• Mao S., Yang H., Huang F., Xie T. and Song Z.: ‘Corrosion behaviour of sintered NdFeB coated with Al/Al2O3 multilayers by magnetron sputtering’, Appl. Surf. Sci., 2011, 257, 3980–3984.
   Web of Science ®Google Scholar
• Caicedo J. C., Amaya C., Yate L., Gómez M. E., Zambrano G., Alvarado-Rivera J., Muňoz-Saldaňa J. and Prieto P.: ‘TiCN/TiNbCN multilayer coatings with enhanced mechanical properties’, Appl. Surf. Sci., 2010, 256, 5898–5904.
   Web of Science ®Google Scholar
• Koehler J. S.: ‘Attempt to design a strong solid’, Phys. Rev. B, 1970, 2B, 547–551.
   Web of Science ®Google Scholar
• Pujada B. R. and Janssen G. C. A. M.: ‘Density, stress, hardness and reduced Young's modulus of W–C:H coatings’, Surf. Coat. Technol., 2006, 201, 4284–4288.
   Web of Science ®Google Scholar
• Wang T. G., Zhao S. S., Hua W. G., Li J. B., Gong J. and Sun C.: ‘Estimation of residual stress and its effects on the mechanical properties of detonation gun sprayed WC–Co coatings’, Mater. Sci. Eng. A, 2010, A527, 454–461.
   Google Scholar
• Zhou Y., Rao G. B., Wang J. Q., Zhang B., Yu Z. M., Ke W. and Han E. H.: ‘Influence of Ti/TiN bilayered and multilayered films on the axial fatigue performance of Ti46Al8Nb alloy’, Thin Solid Films, 2011, 519, 2207–2212.
   Web of Science ®Google Scholar
• Tang P. H., Song R. G., Chai G. Z. and Mao J.: ‘Microstructure and nanoindentation hardness of TiN/AlN multilayer films prepared by pulsed laser deposition’, Surf. Eng., 2012, 28, 165–170.
   Web of Science ®Google Scholar
• Yu Z. M., Zhu Y. K., Niu Y. S., Yang Y., Wei J. and Ding W. J.: ‘Preparation and adhesion performance of multilayered Ni coatings deposited by ultrasonic-assisted electroplating’, J. Adhes. Sci. Technol., 2013, 27, 136–142.
   Web of Science ®Google Scholar